The repair method has been analyzed based on the finite element calculation.
基于有限元计算结果，对修复方法进行了分析。
This paper deals with the problem of the finite element calculation for underground culvert.
本文讨论了地下深埋涵管的应力有限元计算问题。
The finite element calculation of imbalance response and responding experiment are carried out aiming at the simulation rotor.
对模拟转子进行了不平衡响应的有限元计算，并进行了相应的实验研究。
Based on the finite element calculation results, some failure reasons of the pipeline system and the improving methods are discussed.
通过热胀应力和自重应力的系统分析，探讨了该管系的失效原因及其改进措施。
During the finite element calculation of vehicle frame, the simulation of front leaf spring in the complete frame finite element mould must be considered.
在汽车车架有限元计算中，必须考虑前钢板弹簧在整个车架有限元模型中如何模拟。
Though the finite element calculation of the force analysis of the cycloid and the pin gear surface, it has been proved that the method put forward by the paper is correct.
通过对摆线轮和针齿齿面受力分析有限元计算，证明了本文提出的受力分析方法的正确性。
The method of establishing model in the finite element calculation can be used to the engineering calculation of machine foundations and carrying out the theoretical research.
有限元计算中提出的建模方法可以运用于机器基础的工程计算，也可运用于理论研究。
The calculation result is reflected into the finite element calculation model, and the durability analysis of parts is carried out according to the load of the bench experiment.
将冲压计算结果反应到有限元计算模型中，根据台架实验的栽荷，进行零件的耐久性分析。
All along, the Bucket, circular stacker-reclaimer FEM analysis, are used to design the program first, then design the finite element calculation device model based on the program.
一直以来，对于斗轮机、圆形堆取料机等大型钢结构的有限元分析，都采用先有设计方案，再在已有设计方案的基础上，建立设备的有限元计算模型进行分析计算。
The finite element calculation results further showed that, the computation formulation of the adhesive interface shear stress of CFRP and steel, proposed by this paper, is effective.
粘结界面剪应力的有限元计算结果进一步表明，本文提出的CFRP与钢板的界面粘结剪应力计算公式是有效的。
Second, based on research and calculation method of inductance parameters for permanent magnet electrical machine, the finite element calculation and testing method of HEPMSG are presented.
其次，在对永磁电机电抗参数计算方法研究的基础上，提出了该种结构电机的交、直轴电抗参数的有限元计算和测试方法。
An optimized design in the C-frame Hydraulic Press has been introduced, the most reasonable suggestion has been adopted after a contrast among three kinds of bodies via the finite element calculation.
介绍了单柱液压机的优化设计，通过对三种机身有限元计算结果的比较，选用了最合理的优化设计方案。
Considering the boom cross section as a whole, a parametric finite element model and a parametric optimization model for local stability calculation of a boom structure were established.
将吊臂截面作为整体考虑，建立了吊臂结构局部稳定性计算的参数化有限元模型和参数优化模型。
The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
采用整体有限元模型计算与设计优化相结合的方法，可以在满足各项设计要求的条件下找到最优预应力设计方案。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
Comparative analysis of the results come from finite element program calculation and "code of reinforced concrete silo design" is carried out.
对有限元程序计算结果与钢筋混凝土筒仓设计规范方法计算结果进行了对比分析。
This paper studies the calculation of vortex-induced responses of Bridges by finite element models.
本文研究用有限元法计算桥梁涡激振动的时程响应。
It is known that in plane finite element calculation the bearing load must be transformed into force of nodal.
在平面有限元计算中，必须把轴承负荷转为节点力。
This paper deals with the necessary procedures and noticeable problems of the staged - calculation method in the structure finite element analysis.
本文讨论实现分阶段计算方法的具体措施和应该注意的问题。
Based on completion of wall strength calculation, then do the finite element stress analysis.
在完成管壁强度计算的基础上，进行管壁有限元应力分析。
Prestress is converted normally into equivalent loads in the finite element analysis, but calculation of equivalent loads of prestress in body element is very few to be discussed.
预应力在有限元分析中一般按等代荷载考虑，但体单元的预应力等代荷载计算很少见到讨论。
The strain-stress relation of the material occupies the important position in finite element analysis, which is the foundation of all calculation.
在有限元分析中，材料的本构关系占有重要的地位，是一切分析计算的基础。
With the non-line finite element method, the numberical value calculation on the stress and deformation of surrounding rock of deep mine roadways has been presented.
采用非线性有限元法，对深井巷道围岩应力及变形状态进行了数值计算。
To solve this problem, the nonlinear finite element calculation in parallel with model tests are used to study the expansion water seal, and a modified program is identified accordingly.
为解决此工程难题，应用有限元对伸缩式水封进行非线性模拟计算，同时进行模型试验，研究确定了闸门采用伸缩式水封的改造方案。
This paper used the finite element method to compute the temperature field, and combined finite element with analytic solution to develop a calculation of thermal stresses.
本文采用有限元数值分析方法计算多层圆管的温度场，并把解析解与有限元相结合，提出一种求解其热应力的计算方法。
The finite element method is used for the three-dimensional flow field calculation in designing centrifugal pump impellers.
为进行离心泵叶轮的三元设计，用有限元方法解决了离心泵叶轮三元流场的计算问题。
The paper introduces the arrangement of anchor sheaf in gate pier, the design of tension, the selection of anchorage system and the result of space finite element calculation.
本文对预应力闸墩的锚束布置、张拉力设计、锚固体系选择以及空间有限元计算成果作了简要介绍。
The paper introduces the arrangement of anchor sheaf in gate pier, the design of tension, the selection of anchorage system and the result of space finite element calculation.
本文对预应力闸墩的锚束布置、张拉力设计、锚固体系选择以及空间有限元计算成果作了简要介绍。
应用推荐