The paper describes the two-dimension electric-magnet field of the GMA by the finite different method including its theory and application. Also the structure and principle of GMA is studied.
利用有限差分法求解GMA二维电磁场问题，在超磁致伸缩电—机械转换器结构研制的基础上，结合有限差分法计算原理及应用问题对GMA的电磁场进行数值计算。
The common hypotheses of the shell structure aren't alterative in the new finite element method and it finishes the solution through the integral of the different laminas.
新单元的计算方法不改变壳体结构的一般假设条件，利用厚度方向分段积分来完成问题的求解，并对层合截锥壳进行计算。
The method for computing finite rotations is different from that of the translation displacements.
有限转动角的计算和迭加方法与线位移不同。
Based on the deployable structure of a mirror and the operation principle, the finite element method was used to analyze the unit naked mirror and some different mirror support schemes.
基于展开镜结构工作原理，运用有限元方法分析了展开式反射镜单元的裸镜及其支撑方案。
In the analysis, the finite element method and other simplified methods are compared using different models of lateral soil stiffness.
采用不同桩侧土抗力与桩身位移关系的模式，以有限单元法进行分析；
When treating the finite element models of the composite structure, this paper presents a "virtual beam" element mode relaxation method for the accordance of different elements.
在处理组合结构有限元模型时，对不同类型单元之间的协调提出一种“虚梁”单元节点松弛方法。
Second, using large-scale finite element method software—MARC establishes the rolling model, and compiles the process file, and sets up the different rolling condition parameters.
运用大型有限元软件MARC，建立轧制模型，编写过程文件，设置不同的轧制条件参数。
Principles of fuzzy neural network and FNN method are adopted for the numerical simulation of network modeling and forecasting of beams with finite deformation of two different materials.
本文运用模糊神经网络原理，采用学习结合型FNN方法，针对两种不同材料梁的大变形进行了网络建模和预测的数值仿真。
The new method is different from the finite dimensional approximate solution.
这种求分歧值近似解的方法与有限维近似解法有本质的不同。
The satisfactory results are obtained by using concrete calculative examples, A new method is provided to carry out finite element stress analysis for different modulus material.
经过实例分析计算，获得了满意的结果。为对这类材料的结构进行有限元应力分析提供了一种新方法。
The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.
本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；
The finite element method is a dispersed method, so it can be used directly to calculate the status for different loads, rigidity, etc.
有限元法是一种离散化的方法，它可以直接用来计算荷载不同、刚度不同的各种情况。
The temperature fields of the membrane waterwall in burner zone of a 600 MW boiler under different supercritical conditions are analyzed and calculated based on finite-element method.
基于有限元法对某电厂600MW机组锅炉在不同超临界工况下燃烧器区膜式水冷壁的温度场进行了分析和计算。
The natural frequencies of beam are calculated with finite element method in the cases of different crack width and different crack depth.
本文利用有限元法分别计算在不同的裂纹深度、不同的裂纹开口宽度的情况下梁的固有频率。
The stress states of the ceramic nozzles with different entrance angle in the sand blasting process are analyzed with finite element method .
运用有限元法分析了不同入口锥角的陶瓷喷砂嘴冲蚀过程中的应力状态。
Objective to predict the stress distribution of atlas under different pre-trauma postures by finite element method, and to deduce the sites of atlas fracture accordingly.
目的采用有限元方法，预测寰椎在不同位置条件下寰椎应力的分布，并以此推断可能出现的寰椎骨折类型。
Using nonlinear finite element method, the large deformation responses were computed for three plates supported on four edges in different ways.
本文用非线性有限元法计算了三种不同的四边支承板的大变形响应。
The explicit finite element method, with more than usual different kinds of boundary conditions.
显式有限元法，增加了多种类型的边界条件。
METHODS: Three-dimensional finite element method was used to analyze the initial stress around screw implant of different elastic modulus and different diameter.
方法：用三维有限元的方法对不同弹性模量和不同直径种植体植入后骨界面的初始应力进行分析。
By finite element method, the distributions of additional stress of piled raft foundations in different raft rigidities are analyzed.
采用有限单元法对不同筏板刚度下桩筏基础下卧层附加应力的分布规律进行分析。
Thus, nodal code of Finite Element Method can be parallelized and operated in the connecting point of different groups of PVM.
因此，有限元节点代码可以被并行化、并能在基于不同的PV M机群结点上运行。
Take pin threads of NC50 drill collar as an example, Finite Element Method is used to analyze the different stress-relief grooves of pin thread connection.
以NC50型钻铤公螺纹作为研究对象，用有限元方法对加工有不同应力减轻槽的钻铤公螺纹接头进行了分析计算。
Based on the tunnel excavation engineering practice, finite element method is selected to analyze the influence of building pile foundation induced by adjacent tunnel excavation with different depths.
基于隧道开挖的工程实例，采用有限元方法，分析了临近桩基的隧道开挖对建筑物桩基的影响。
The paper presents the research into the stress state of roller teeth using FEM (finite element method). The results show that different structure parameter causes a change in roll stress.
采用有限单元法对轧辊辊齿的应力状态进行了研究，得出了不同结构参数对轧辊应力变化的影响。
In this paper, the WKB method and the finite-difference time-domain (FDTD) method are applied to study the electromagnetic characteristics of target coated with different plasmas.
本文较系统地用WKB方法和FDTD方法研究了不同等离子体覆盖导体目标的电磁特性。
Further, according to thermal cycle calculated by the finite element method, the thickness of reaction layer was predicted in the case of different heat input.
进一步，通过有限元数值模拟方法计算了界面不同位置的热循环曲线，进行了不同热输入条件下反应层厚度的预测。
Based on the definition simple beam, the finite element method is used to analyse some simple beams, with symmetric structure and loading, and symmetric beams, with different support.
从简支梁定义出发，应用有限元法，对结构、受力对称的简支梁以及不同支承的对称梁进行了计算。
Based on the definition simple beam, the finite element method is used to analyse some simple beams, with symmetric structure and loading, and symmetric beams, with different support.
从简支梁定义出发，应用有限元法，对结构、受力对称的简支梁以及不同支承的对称梁进行了计算。
应用推荐