The FEM model of rapier loom frame is established with ANSYS software.
利用ANSYS软件建立了剑杆织机机架的有限元模型。
The effects of the FEM model, the layer sum of CFRP and the U shape hoop to the interfacial stresses are emphatically studied.
重点研究了有限元计算模型、碳纤维片材层数以及U形箍对粘接界面应力的影响。
The rigid multibody dynamic model of the tilting train, the nonlinear dynamic model of the pantograph and the FEM model of the catenary are set up.
建立摆式列车多刚体系统动力学模型、受电弓非线性动力学模型和接触网有限元动力学模型。
Based on the brake characteristic of water-cooling disc brakes during going down, the FEM model of thermal analysis during cycle braking is established.
基于盘式刹车在下钻过程中的制动特性，建立了水冷式刹车盘下钻过程中循环制动的有限元分析模型。
With the Using of the thin-walled structure FEM theory, the FEM model is set up, which can reflects the distortion characteristic and stress distributing rule.
运用空间薄壁结构有限元理论，建立了能真实模拟人字门运行过程变形和应力规律的空间薄壁结构有限元数学模型；
This paper sets up the FEM model of the composite structure through ANSYS, simulates the floor, truss, shear connector by the shell, rigid frame and connector elements.
本文建立了交错桁架结构体系的楼板与钢桁架ANSYS模型，把楼板、钢桁架杆件和剪力连接件分别用板单元、刚架单元和连接单元这三种单元来模拟。
The practical application shows that the forecasted water heads approach to observed values while the identified permeability coefficients are introduced to the FEM model.
工程实际应用表明，所提出的反演方法得到的渗透系数代入到有限元模型，水头预报值具有比较高的精度。
In addition, since the geometry of the flow channel in a spiral mandrel die is quite complex, it is difficult to create the FEM model of the flow channel by those ordinary ways.
此外，由于螺旋式管机头流道的复杂性以及畸形性，用通常方法很难建立起该流道的有限元模型。
The FEM model also involves treatments of boundary conditions, simplified treatment of some skeleton parts and deals with the fixed weight and loading that is put on the structure.
在有限元模型的建立过程中，不但考虑了边界条件的处理与简化，还考虑了骨架结构以及作用在其上的载荷的处理方法。
D FEM analysis model is adopted for the stability analysis in construction including hoisting and closing single steel tubular arch rib and service stages respectively.
采用空间杆系计算模型对包括单根钢管拱肋吊装合龙在内的施工和运营阶段进行稳定性分析。
According to the special structure of precast block of inverted arch for TBM construction tunnel, the dynamic construction state is modeled by FEM with surrounding rock - structure calculating model.
针对TBM施工隧道仰拱预制块的特殊结构，采用围岩-结构模式，进行了模拟施工动态的受力影响计算分析。
The time-stepping FEM model for the dynamic analysis of power system is established considering the nonlinear characteristics of internal generators and typology structures of external circuit.
建立了既考虑发电机内部非线性又考虑外部电路拓扑结构的用于系统动态分析的时步有限元模型。
The parametric finite element model (FEM) of wedged-ring joint structure was established using ANSYS parametric design language (APDL).
利用APDL语言对ANSYS软件进行二次开发，建立楔环连接结构的参数化有限元模型。
The coupled FEM model of tower and lines was set up. The impact of tower to line galloping was studied.
建立了塔线耦联的有限元模型，研究了输电塔对舞动的影响。
The regularity of the results of FEM and model test are same.
有限元分析结果与模型试验结果的规律性是一致的。
Then deal with it in the FEM program and accomplish the parameterized FEM model, It can be analyzed by FEM efficiently and convently on the tooth profile of different tooth profile parameters.
实现了有限元分析模型的参数化，可以方便地对不同齿形参数的齿轮进行有限元分析和计算。
The model was numerically solved by FEM, fully coupled for thermal-chemical model and one way coupled for the stress model.
其中热-化学模型可采用完全耦合的形式求解，而应力模型则可采用单向耦合的形式求解。
Based on the tube bending FEM simulation model, the tube bending springback rule under the different craft parameters and the material parameters was studied.
基于管弯曲回弹有限元模拟模型研究了弯曲工艺参数和材料参数对管弯曲回弹的影响规律。
The contact zone between roller and workpiece and its contour's definition are the cruxes of establishing the FEM mechanical model.
在建立筒形件强旋有限元力学模型过程中，旋轮与工件接触区及其边界的描述是重要的一环。
Furthermore, a checkout method for the third harmonic voltage based protection scheme of stator ground fault in generators is presented based on the verified MLM-FEM coupled model.
进而提出了基于多回路-有限元耦合数学模型的同步发电机定子单相接地故障三次谐波电压保护方案校验方法。
Newton Raphson method was introduced into the FEM analysis model in order to ensure that the solution of each iterative step would converge by means of satisfying some restrictive condition.
在有限元分析模型中引入了牛顿迭代法，以使每一时间步长的末端温度满足某一限制条件而平衡收敛。
The common calculation methods include dual pressure method and pressure temperature method in which the air bag FEM model can be created using the direct folding method or initial matrix method.
常用的计算方法有双压法和压力温度法等，可以采用直接折叠法或初始矩阵法建立气囊的有限元模型。
The CA model and FEM are combined, then the differential PCA-FEM algorithm is set up, which attempts to simulate the deformation and failure of rock in the sense of vector.
引入应力、应变和位移等矢量概念，将元胞自动机模型与有限元方法结合起来，建立了差分形式的PCA有限元算法，尝试从矢量的角度模拟岩石的变形及破坏问题。
The FEM and measured results validated the accuracy of this model in frequency calculation of piezoceramic elements.
有限元计算和试验测量结果验证了这一模型对压电振子频率计算的准确性。
To the designers of the gun, the building of FEM model is very useful in structural optimization design by shortening the period of design and reducing work intension.
有限元计算模型的建立，对于火炮结构优化设计、缩短研制周期和降低火炮设计人员的劳动强度都具有重要意义。
The FEM air isolation model based on the state equation of ideal gas is used to study the effects of air isolation.
应用基于理想气体状态方程的气幕隔震的压力有限元模型，对模型气幕的隔震效果进行了研究。
Dispersing the whole BIW with 3d shell elements of 3 or 4 nodes created the fine FEM model.
采用3节点或4节点空间板壳单元离散整个白车身，建立了细化力学模型。
Dispersing the whole BIW with 3d shell elements of 3 or 4 nodes created the fine FEM model.
采用3节点或4节点空间板壳单元离散整个白车身，建立了细化力学模型。
应用推荐