The FEM method was adopted to verify the rationality of the design program. The situation results confirmed with engineering practice.
应用有限元方法来验证设计方案的合理性，模拟结果与工程实践基本吻合。
A new well test model for the triangular reservoir with different boundary conditions is developed in this paper. The typical curves for the new model are calculated by the FEM method.
提出了三角形油藏在不同边界条件下的试井理论模型，并用有限元方法对问题进行了求解，得到了不同情况下的试井理论曲线。
This dissertation successfully used cluster computing for solving large-scale linear algebraic equations problems when the finite element method (FEM) is applied in electrical prospecting.
本文成功地将机群计算应用到解决在电法勘探中使用有限元方法（FEM）时产生的大规模线性方程组问题。
The FEM calculate method for contact problem, i. e. LAGRANGE multipliers, penalty methods and direct constrains were discussed.
同时探讨了接触问题的三种计算方法——拉格朗日乘子法、罚函数法和基于求解器的直接约束法；
The FEM(finite element method) of the main shaftclamping apparatus-cutter system for DMU-70V NC high speed machining was built, and the results of the FEM were validated using dynamic test.
建立了DMU-70V五轴数控高速加工中心主轴-夹具-刀具系统的有限元模型，并利用动态测试的方法对有限元计算结果进行验证；
By introducing the FEM, the mixed method is extended to perform finite element reliability analysis.
通过引入有限元方法，混合分析法可适用于结构可靠度问题。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
Conjugate gradient method were choosed to solve the large sparse matrix equations induced by the FEM and computer language FORTRAN was used to programme the numerical simulation system software.
选择共轭梯度法解决由有限元法形成的大型稀疏矩阵方程，应用FORTRAN语言编制了数值模拟系统软件。
The basic process of FEM and the principle of nonlinear element method are simply presented.
对有限元分析的基本过程及非线性有限元原理进行了简要介绍。
Meanwhile, the author gives the FEM calculation process and partial parameter values, and introduces the method to decide the frozen soil strength.
同时给出有限元计算过程及部分参数值，并介绍了冻土强度的确定方法。
The analytical result proofed by finite element method (FEM) indicates the same results by two methods.
通过有限元法验证解析结果，两种方法所得结果吻合较好。
An improved MonteCarlo stochastic FEM based on polynomial preconditioners is established through introduction of the conjugate gradients method into the traditional MonteCarlo stochastic FEM.
将共轭梯度法引入蒙特卡洛随机有限元法，建立基于多项式预处理共轭梯度法的蒙特卡洛随机有限元方法。
Based on finite element method (FEM), the vibration of power transformer windings caused by electrodynamic force is analyzed.
利用有限元算法分析了三相电力变压器绕组各线匝在不同运行模式下电动力引起振动。
The two-dimensional temperature fields in specific transverse and longitudinal sections are numerically solved by the finite element method (FEM).
结合中医舌诊机理，用有限元法计算了猪舌内部横、纵剖面的二维温度场。
The rectangular groove guide (RGG) is analyzed by the finite element method (FEM).
本文用有限元法分析了矩形槽波导。
The FEM displacement method is naturally symplectic conservative, the mixed energy representation is also shown symplectic conservative.
本文指出，有限元位移法自动保辛，有限元混合能表示也保辛。
The variation finite element method (FEM) using the pseudo-potential function was presented for the simulation of transonic rotational flows.
本文运用赝势函数变分有限元方法数值模拟了绕翼型的跨音速有旋流动。
The resistivity, formation factor, and resistivity index of rocks were calculated using the finite element method (FEM) and we studied the effect of rock wettability on electrical properties.
利用有限元方法计算了岩石电阻率，进而得到岩石地层因素和电阻率指数，并考查了岩石润湿性对岩石电阻率指数的影响。
The common calculation methods include dual pressure method and pressure temperature method in which the air bag FEM model can be created using the direct folding method or initial matrix method.
常用的计算方法有双压法和压力温度法等，可以采用直接折叠法或初始矩阵法建立气囊的有限元模型。
Because of the adoption of FEM, the proposed method to calculate the static stiffness of groundsill is suited and accurate more than the approximate method.
由于有限元方法的应用，使得本文所提出的计算地基的静刚度的方法比近似计算方法的适用范围要广，同时也要精确一些。
The finite element method (FEM) is applied to investigate the effect of metal inlay in single lap joint on the stress distribution.
利用有限元方法研究了金属镶嵌对单搭接接头应力分布的影响。
The finite element method (FEM) of contact theory and eigenvalue computing is used in this thesis to solve the problem of natural modal analyzing aircraft structure with contact surface.
本文采用接触理论有限元数值方法加特征值计算的方法来解决考虑连接面固有特性计算的问题。
Based on the analysis of the existent detecting method, the application of the finite element method (FEM) is put forward to simulate dam leakage monitoring by the high-density resistivity method.
在分析已有方法的基础上，提出利用有限元法将高密度电阻率法用于堤坝渗漏监测并做理论上的分析。
Among the numerical simulation methods, the finite element method (FEM) is widely to solve the electric field with complex structure and multi-dielectric medium with high precision.
在常用数值求解方法中，有限元法以其通用性强，适用于结构复杂、多重介质复杂场域求解，且求解精度高等优点而被广泛用于电器电场的数值求解。
Magnetic fluid seal structure is analyzed by the finite element method (FEM) in this article.
本文利用有限元数值计算方法对磁流体密封结构进行了分析。
In addition, the annular elements may be extended into the FEM and the Charge Simulation Method.
该法还可推广于模拟电荷法及有限元法中。
Simultaneously, the comparison of the results from the method developed in this paper to the FEM results for a simplified model of a practical instance shows the reasonability of the method.
对某闭气炮闩简化模型，将该方法的结果与有限元数值模拟的结果进行了对比，验证了所建模型和计算公式的合理性。
In computing safety degree of the soil slope stability by nonlinear FEM strength reduction method, the influence of yield criterion on the calculation results is analyzed.
分析了在应用有限元强度折减法计算土质边坡稳定安全度时，屈服准则对计算结果的影响。
In computing safety degree of the soil slope stability by nonlinear FEM strength reduction method, the influence of yield criterion on the calculation results is analyzed.
分析了在应用有限元强度折减法计算土质边坡稳定安全度时，屈服准则对计算结果的影响。
应用推荐