Also, the procedure to implement the elastoplastic contact problems is presented in details.
论文中详细介绍了弹塑性接触问题有限元求解的实施过程。
The elastoplastic constitutive relation of high compressibility clay in Wuhan was investigated.
研究了武汉地区高压缩性黏土弹塑性本构模型。
Finally, contact method is used to analyze the elastoplastic contact behavior between gusset and pin.
最后还分析了节点板与销栓的弹塑性接触问题。
The elastoplastic properties of asphalt concrete of steel deck pavement are analyzed under cyclic load.
对钢桥面铺装沥青混合料材料进行循环荷载下的弹塑性分析。
In the elastoplastic-damage model, the coupling between elastoplastic deformation and damage is considered.
该模型中考虑了弹塑性变形与损伤的耦合作用。
The research shows that the elastoplastic BEM is satisfactory for analyzing flat rolling of plate and strip.
该研究表明，弹塑性边界单元法用来分析板带轧制是满意的。
Introducing the method of optimizing back analysis using displacement and summarizing the elastoplastic model.
对位移反分析方法作了介绍，并对各种弹塑性模型进行了总结。
Finally, the elastoplastic time-history analysis is carried out for the structure using a simplified story model.
最后采用弹塑性时程分析方法对简化的层模型结构进行了时程分析。
Aiming at the elastoplastic analysis of soil slope stability, a reproducing kernel particle method(RKPM) was put forward.
针对土质边坡的稳定性问题，提出了利用无网格法中的再生核质点法（RKPM）进行弹塑性分析的方法。
In this paper, we have discussed the elastoplastic problems of the circular tunnel under unequal compression in two directions.
本文研究两向不等压作用下圆形巷道围岩的弹塑性问题。
The elastoplastic bending instability of the tapered compression members under axial loads about the weak axis is mainly studied.
主要研究了楔形变截面压杆绕弱轴的弹塑性弯曲失稳。
A micromechanical method is used to study the elastoplastic behavior of metal-matrix composite reinforced by unidirectional fibers.
本文利用微观力学方法研究了单向连续纤维增强的金属基复合材料的弹塑性变形行为。
In the paper the elastoplastic constitutive relations of unidirectional fiber reinforced composite materials were modeled numerically.
本文对单向连续纤维增强复合材料的弹塑性本构关系进行了数值模拟。
The Monte Carlo method combined with the elastoplastic finite element method (FEM) is proposed to analyze the slope stability problems.
蒙特卡洛随机搜索法与弹塑性有限元法结合，求解边坡稳定问题。
By using the elastoplastic finite element method, mechanical model for wear tension and internal pressure resistance of casing joints is set up.
采用弹塑性有限元方法，建立了套管接头磨损拉伸与抗内压的有限元力学模型。
A simplified analytical method for the elastoplastic dynamic large deflection response of portal frames under impact loading is reported in this paper.
本文报道一种求解门式刚架在冲击载荷作用下动态弹塑性大变形响应的简便分析方法。
According to the engineering theory of plastic bending, the elastoplastic bending analysis of a beam is conducted using differential quadrature method.
根据梁塑性弯曲的工程理论，采用微分求积法进行了梁的弹塑性平面弯曲分析。
In the paper, the elastoplastic boundary element method (BEM) of the initial strain is worked at calculating parameters of flat rolling of plate and strip.
本文在计算板带轧制中的参数时应用了初始应力的弹塑性边界单元方法。
In this paper, energy method and finite difference method are used to analyze the elastoplastic deformation of spherical nodes in the structure of networks.
本文用能量法和差分法对网架结构球节点(闭合的完全球壳)，进行了弹塑性变形分析和塑性极限分析。
Besides, by adopting the method of mobile mapping origin, the mapping rule is modified to simulate the elastoplastic property of soils under cyclic loading.
同时，在映射准则的定义中采用映射中心可移动的方法，以反映土体在卸载再加载时的弹塑性。
In this paper the Elastoplastic FEM is used to analyze the relation between load capacity and deformation of the central loaded steel-tubed concrete column.
本文用弹塑性有限元法分析了中心受压钢管混凝土短柱的承载力与变形的关系。
The restoring force model and the method for dealing with the characteristic value are also given, which can be applied to the elastoplastic dynamic analysis.
还给出恢复力模型及其特征点的取值方法，可进行底部框架抗震墙砖房的弹塑性动力分析。
Combined with experimental results, a simplified mechanics model for the elastoplastic analyze of the new type of hollow ball bolted joint is built in the paper.
本文结合试验研究的成果，建立了新型空心螺栓球节点弹塑性分析的简化力学模型。
The elastoplastic seismic response is analysed, showing both the rationality and feasibility of strengthening structures of this type with reinforced concrete corers.
并做了弹塑性地震反应分析。结果表明，对此类结构采用外包钢筋砼加固方法是合理可行的。
By introducing the hysteretic behavior of masonry, this model can be used for the elastoplastic time history analysis of masonry buildings with complex configuration.
引入了砌体的滞回特性，该模型可用于复杂体型砌体结构房屋弹塑性地震反应时程分析。
This paper deals with the elastoplastic problems of the flat shell strip using material nonlinear finite strip method instead of the traditional solution of Beam Theory.
文章突破传统的梁理论法，应用材料非线性有限条法对平面壳条的弹塑性问题进行分析。
On the basis of the undrained shear strength being the logarithm function of the disturbance degree, the elastoplastic solution of the cylindrical expansion is obtained.
在考虑塑性区内不排水强度是扰动度的对数函数的基础上，得到了考虑扰动的球形孔扩张的弹塑性解答。
In the elastoplastic fracture analysis for pipelines steel X60, J-A2 two parameter approach was adopted to predict the failure pressures of pipelines with surface cracks.
在对X60管钢弹塑性断裂分析中，采用J - A2双参数方法来预测带表面裂纹管道的破坏压力。
In the elastoplastic fracture analysis for pipelines steel X60, J-A2 two parameter approach was adopted to predict the failure pressures of pipelines with surface cracks.
在对X60管钢弹塑性断裂分析中，采用J - A2双参数方法来预测带表面裂纹管道的破坏压力。
应用推荐