The cognitive level is raised by results of experiment and analysis for mechanical properties of casing connection, and the useful data are provided for the further research in theory.
实验和分析结论提高了全面认识套管接头力学性能的水平，而且对从理论上进一步深入研究提供了可靠的数据。
Through the rheological behavior of the analysis, using injection molding technology system to its mechanical properties of the sample for analysis.
通过对流变性能的分析，采用注射成型工艺，制出样条对其力学性能进行分析。
The mechanical properties of steel wires and concrete should be considered in the calculation and analysis of containment structure.
安全壳结构的承载能力计算分析需要考虑钢绞线和混凝土的力学特性。
The effects of nitrogen on the properties of low carbon high chromium cast iron were studied by mechanical property and wear resistance test, and metallograph analysis using OM and ESEM.
通过力学性能和耐磨性能测试、金相组织观察和ESEM形貌分析，研究了氮含量对低碳高铬铸铁性能的影响。
It is indicated that the sub default has influence on materials microstructure and some properties on the basis of NDT, TEM and analysis of ablative and mechanical property.
对大锥角防热层的亚缺陷进行无损检测、烧蚀性能、力学性能及扫描电镜分析，分析表明亚缺陷对材料的结构和性能有一定的影响。
According to the requirements of stock's using performance in practical production, the mechanical properties of plastic-wooden stock under static and dynamic load were analysis and checked.
根据实际生产中托盘的使用性能要求，对塑木托盘在静载、动载条件下的力学性能进行分析和必要的校核。
The mechanical properties of composite materials are correlated with the manufacturing process, and their diversity is generally larger than that of metals, so the reliability analysis is important.
复合材料的机械性能与加工制造等过程密切相关，其材料性能的离散度较大，因此考虑不确定性因素的结构可靠性分析非常必要。
The effects of two patterns of squeeze casting on mechanical properties of ZA43 alloy were investigated through the analysis of alloy liquid flow and pressure loss.
从合金液的流动和压力损失的角度，研究了两种挤压铸造方式对ZA43合金力学性能的影响。
On the basis of the analysis of AFM's mechanical properties, the conclusion that the necessary conditions of AFM are abrasive flow media's viscoelastic property is reached.
在分析磨料流加工的力学特性基础上，得出了流体磨料的粘弹性是进行磨料流加工的必要条件。
The effects of the environments on the dynamic mechanical properties of the pultruded CF/VE composite were studied by dynamic mechanical thermal analysis (DMTA).
通过动态机械热分析（DMTA）考察了环境条件对复合材料动态力学性能的影响。
The effect of blending time on the properties of reactive PP/EPDM alloy was studied via the analysis of gel content, mechanical properties, melt flow behaviour and morphology.
通过凝胶含量测定、力学性能试验以及熔体流动性能测试等手段，研究了共混（反应）时间对密炼法和挤出法反应性PP/EPDM共混合金性能的影响及其机理。
Because of the obvious difference of the mechanical properties between the surface layer and its base, the strength analysis with neglecting surface layer will result in error not to be ignored.
由于模具表面层与基体材料的机械性能有明显的差异，忽略表面层进行的模具强度分析将产生不可忽视的误差。
The effects of thermomechanical treatment on the structures and properties of 7a04 aluminum alloy were studied by mechanical tensile test, metallographic and TEM analysis.
采用力学性能测试、金相显微分析和TEM等方法。研究了形变热处理工艺对7a04铝合金的组织和性能的影响。
Through the analysis of mechanical properties of the specimens, the relationship between the fracture strength and bulk density was characterized in a linear equation.
通过对试样力学性能的分析可知，推导出了材料断裂强力与体积密度的关系式。
The variation of thermal - physical properties and mechanical properties of material with temperature is considered in the thermal - elastoplastic analysis.
在热弹塑性分析中考虑了材料热物理和力学性能依赖于温度变化。
The influences of quenching temperature on mechanical properties of the pipeline steel were investigated by means of microscopic analysis and mechanical property test.
采用力学性能测试、显微组织分析等方法研究了终冷温度对双相大变形管线钢的力学性能的影响。
Through the detection of mechanical properties and deformation, as well as the analysis of deformation and bearing capacity, the steel tower after fire can't satisfy application requirement.
钢塔材料力学性能检测、变形监测以及变形承载力分析表明，火灾后的钢塔已经不能满足使用要求。
A 3-d FEM model was built up, which included a non-linear coupled thermal-mechanical analysis accounting for the temperature dependency of the thermal and mechanical properties of the material.
建立了成形过程的三维非线性热力耦合有限元模型，模型中考虑了材料热物性参数和力学性能参数与温度的相关性。
Finally, through a comprehensive analysis of compressive mechanical properties of gravel RPC materials, proposed the optimal mix from the 16 groups of test.
最后通过对碎石rpc材料的抗压力学性能的综合分析，提出了本次16组试验中的最优配合比。
Finally, through a comprehensive analysis of compressive mechanical properties of gravel RPC materials, proposed the optimal mix from the 16 groups of test.
最后通过对碎石rpc材料的抗压力学性能的综合分析，提出了本次16组试验中的最优配合比。
应用推荐