This article used the method of software engineering technology to introduce the image compression code software development and the test.
本文采用软件工程技术的方法详细介绍了图像压缩编码软件的开发及其测试实现过程。
With the rapid development of the electronic and computer technology, the virtual instrument technology is widely applied in the field of the power withstand test as a new measure method.
随着计算机技术以及电子技术的飞速发展，虚拟仪器技术作为一种新的测量模式在工频耐压试验的测量中得到了很好的应用。
The test research on dropping penetration process provides low pollution technology for agricultural facilities and points the production and application method of anti weed nonwovens.
本试验研究的滴渗法涂药工艺为设施农业提供了低污染技术，并提出了含除草剂非织造布的生产和使用技术规范。
Methods All the extracts were obtained by the technology of solvent-refining, and MTT method was used to test the cytotoxicity of the extracts on breast cancer of MCF-7 cells.
方法采用系统溶剂法从树舌灵芝得到一系列提取物，运用MTT法研究了各提取物对体外培养的人乳癌MCF-7细胞增殖的影响。
In this paper, fuzzy recognition technology is applied by means of fuzzy set theory to present an on-line fuzzy recognition method for boiler energy-loss pattern, and simulation test was made.
本文应用模糊识别技术，借助模糊集理论提出了一种锅炉能损模式的在线模糊识别方法，并进行了仿真测试。
The vehicle emission test management and emission data analysis have become more important with the development of test method and technology in our country.
随着我国机动车排放检测方法和技术的不断完善，对检测工作管理及检测数据分析提出了越来越高的要求。
A method of remote virtual test, condition monitoring and fault diagnosis for equipment using CORBA and agent technology is presented in this paper.
提出了一种利用CORBA和智能代理技术进行设备的远程虚拟测试状态监测诊断的方法。
This paper proposes a generation method of path coverage test based on Gene Expression Programming(GEP) algorithm, compiler technology and Virtual Machine(VM).
提出一种基于基因表达式编程（GEP）算法、编译器技术、虚拟机技术的路径覆盖测试用例生成方法。
Well test technology is not only a method for direct survey of oil beds but also an important means of reservior evaluation and performance monitoring.
试井技术是一种探测油层的直接方法，也是进行油藏评价和生产动态监测的重要手段。
The essay mainly introduced the safety problem of safety technology, the function and method of attacking test technology in computer network, analyzed the application of several typical product.
总结了计算机网络安全问题中的安全技术，攻击检测技术的作用、方法。分析了几种典型产品的应用。
According to test research situation, machining technique has been presented in terms of cutter structural parameters, cooling method for drilled holes and machining technology.
根据试验研究情况，从刀具结构参数、钻孔冷却方式、加工工艺要点等方面详细介绍了高温合金孔的加工技术。
This paper describes the main function, technology and test of L82C37A programmable DMA controller. It also shortly introduces basic circuit and design method.
叙述了L82C37A可编程DMA控制器的主要功能、制造工艺和测试，并对其基本电路及设计方法进行了简要介绍。
Objective To study and optimize the ethanol extracting technology condition of Scorpion and Centipede with orthogonal test method.
目的研究全蝎、蜈蚣乙醇提取工艺，并且采用正交设计法优选全蝎、蜈蚣的提取工艺条件。
And technology method of point test and continuous cut test has been accounted for.
叙述了现场定点测试和连续剖面测试工艺方法。
The methods of test on producing of size loading in size technology are introduced completely, and the examples for the testing system of testing method are given.
对浆纱生产过程中上浆率的各种在线检测方法作了较为全面的介绍，列举了各种检测方法的检测系统。
In this paper, in accordance with feature of airborne computer system, a computer test technology method used for fault diagnosis and test of airborne computer system is proposed.
本文针对机载计算机系统的特点，提出了应用计算机测试技术进行机载计算机故障诊断的方法，解决了对机载计算机系统的测试问题。
The design characteristics, foundry technology and ultrasonic test method of heavy section ductile iron bearings for steam turbines was described and analyzed.
分析了汽轮机厚断面球铁件轴承座的设计特点、铸造技术和超声波探伤。
This paper explored the role and structure of the simulate and test system and prime technology & method, and also proposed the simulate & test system′s hardware and software structure frame.
本文主要讨论了仿真测试系统构造的必要性，硬件实现与软件实现的主要方法和实用技术。
This paper generally introduces the character and form, method of property test and production technology of radiation-shielding PMMA at home and board.
综述了国内外防辐射有机玻璃的特性、组成、制备技术及其性能测试的方法，并指出了防辐射有机玻璃的发展趋势。
The test results show that the technology and method of simulation test are correct and available. And the results of simulation test have served in the engine design.
结果表明：模拟实验技术可行，实验方法正确，模拟实验结果为发动机设计提供了依据。
On these bases, the processes of the optimal design unit were simulated and calculated with PRO-II. Pinch Technology in this test method optimize the accuracy of heat exchanger network.
在此基础上，对新优化设计的航煤加氢装置流程进行了模拟，以此检验夹点技术方法对优化航煤加氢装置换热网络的准确性。
The article covers the technology of ut method executed on the weld of thin-wall vessel and tracing of "distance-amplitude" curve in order to make easier test.
论述薄壁容器焊缝的超声波探伤技术，制作“距离—波幅”曲线，为检测提供了方便。
This paper introduced the test method and the production technology of making lithium bromide by using ammonia as solvent, also defined the best technological conditions.
本文介绍了用氨水作溶剂制取溴化锂的实验方法和生产工艺。
The purpose of the thesis is to study the wisdom of components' offline test technology and investigate the new method of components' maintenance.
论文的目的在于研究一种压缩空气系部件离线测试技术，旨在探讨部件维修检测的新方法。
Various physical and mechanical properties of RCA from this technology were investigated according to Standard and Test Method for the Coarse Aggregate of Normal Concrete (JGJ 52-2006).
按照《普通混凝土用碎石或卵石质量标准和检验方法》（JGJ52-2006）测试了由该工艺生产的再生骨料的物理力学性能指标。
This paper describes specific fuel setting method and test procedure for airplane fuel system icing flight test which is verified in icing test technology research of an airplane fuel system.
本文结合某型飞机燃油系统结冰试验技术攻关工作，研究飞机燃油系统结冰飞行试验的燃油配水方法和试验程序。
To analyse substation automation product, testing technology and methods, this paper presents a design method of test system for substation automation product.
对变电站自动化产品和测试技术、方法进行分析，提出了一种变电站自动化产品测试系统的设计方法。
The technology and test results for the preparation of non-iron aluminium sulfate by primary amine extraction method are introduced. The technical and economical status of the process are also stated.
介绍了用伯胺直接从铝土矿的硫酸浸取液中萃取分离铁生产无铁硫酸铝的工艺研究内容和结果，并介绍了工艺技术经济状况。
The test method condition technology and results of preparing boron coating artificial diamond with nitrogen from T641 graphite material with boron were introduced.
介绍了用含硼T641石墨材料，研制硼皮含氮人造金刚石实验方法、条件、工艺及结果。
Using optimal smoothing technology to test and evaluate the accuracy of in-flight alignment is an available method to analysis the performance of INS.
利用最优平滑技术对惯导系统动基座对准效果进行评估，是分析导弹系统的制导精度和惯导系统自身器件性能的有效方法。
应用推荐