The test results show that one of the products is mold infested and the other product contains levels of lead that are too high.
测试结果表明，其中一种产品受到霉菌感染，而另一种产品含铅量过高。
Mould produced the first test of the accuracy of mold.
用模具生产出来的首件检验模具的精度。
In charge of new mold and new material test. Making optimization and record on documents.
负责新模具，新原料试模，验证并记录相关文件表单。
Methods 18 child diarrhea patient were detected with stool routine test and bacteria culture and sensitivity, ameba trophont, cyst and mold.
方法选择18例小儿腹泻的阿米巴肠炎病例，进行便常规检查，细菌培养加药敏试验，查阿米巴滋养体、包囊和霉菌。
Prepare some test cubic mold for mortar.
准备好砂浆试模。
According to the technology of vibratory sink mold wall, layering characteristic of the preventing seepage material of the composite mortar is studied through the layering vibratory dais model test.
结合振动沉模防渗墙技术，通过分层模型的振动台试验，研究了混合砂浆防渗料的分层性随振动模型的变化情况，揭示了混合砂浆防渗料的性能指标随振动模型的变化规律。
We make full use of CAE mold flow analysis techniques, simulation and optimization of mold runner system design, improve part quality and reduce the number of test mode and unnecessary waste.
我们充分利用CAE模流分析技术，模拟和优化模具浇道系统设计，提高零件的质量和减少试模次数及不必要的浪费。
By use of orthogonal test design, how the injection speed, pouring temperature and mold temperature effects the casting shrinkage porosity forming is studied.
然后，本文通过正交试验的方法研究了压射速度、浇注温度和模具预热温度对铸件缩松缩孔缺陷的影响。
It can reduce thinning rate greatly, ensure precision of key dimensions, reduce the mold test times and improve the efficiency.
该工艺方案减小了零件变薄率，保证了零件关键尺寸的精度，减少了试模次数，提高了效率。
Each subject to provide a lot of quality exam, heavy and difficult to explain knowledge, years Zhenti mold test and micro courses learning content.
每个科目提供大量优质的题库、重难点知识点讲解、历年真题模考以及微课程等学习内容。
New structure of compression molding mold was designed and manufactured, and the long term test was developed on the original cap making machine.
开展了新结构压塑成型模具的设计、制造工作，并在原制盖机上进行了长期试验。
On the Baosteel continuous casting test platform, the mold friction tests with hydraulic oscillation system were carried out.
基于宝钢板坯连铸试验平台，开展了液压振动下的结晶器摩擦力检测实验研究。
The company is equipped with mold processing equipment and test equipment such as: three-coordinate measuring machine, projector, etc.
公司拥有配套齐全的模具加工设备、辅助加工设备、检测设备，如三坐标测量仪、投影仪等。
Based on research of methods of testing physical properties of mold powder, the system for physical properties test with computer and advanced measuring technology has been developed.
通过对保护渣物理性能测试方法的研究，将计算机与现代先进检测技术运用于保护渣物性参数测试过程中，开发了保护渣物理性能测试系统。
This mold design has got through the production test in factory.
该设计已通过实际生产检验。
The method can be used to test the dimethyl fumarate in the mold inhibitor.
可用于测定防霉剂中的富马酸二甲酯含量。
With the technology of vibratory sink mold wall, the layering characteristic of the preventing seepage material of the composite mortar is studied by the layering vibratory dais model test.
结合振动沉模防渗墙技术，通过分层模型的振动台试验，研究了混合砂浆防渗料的分层性随振动模型的变化情况，揭示了混合砂浆防渗料的性能指标随振动模型的变化规律。
Some our customers need prototypes before mold making to do function and assembly test or as the new products for exhibition, so we offer this service as well.
客户在正式做模具前会需要做手板，用来做功能测试和装配，因此我们提供此项服务。
Mold test of new parts, products following up, continuously improvement of products after batch production, getting products feedbacks from customers, etc.
新产品的试模、产品的跟踪、批产后的持续改进、跟踪顾客认可问题等工作；
We test the influence of metal temperature and components of the mold upon surface tension of metal.
测定了铁水温度和铸型成分等对铁水表面张力的影响。
The results of the test have shown that the operating technology for colloidal silicate binding is comparatively simple and the strength and gas permeability of the mold are comparatively good.
通过与硅酸乙酯水解液粘结剂的比较表明，以硅溶胶作为透气性金属陶瓷材料的粘结剂，其材料的制造工艺简单、强度较高、透气性较好。
A comparative test between green sand mold casting method and resin sand-coated iron mold casting method was conducted.
介绍了球铁刹车盘的不同铸造工艺，对粘土砂湿型铸造工艺和覆砂铁型铸造工艺进行了试验对比。
Through practical test, the fungicide has remarkable control efficiency to the powdery mildew and gray mold of fruit trees and vegetables, with high efficiency, safety and environment protection.
经过实际测试，本发明的杀菌剂对果树、蔬菜白粉病和灰霉病有显著的防治效果，且高效、安全、环保。
The test for properties showed the binders could substitute for tung oil binder to affix the class I mold and core.
经性能测试表明，其可以代替桐油粘结剂，用于I级型芯的粘结。
Companies from product design, mold design, mold manufacturing, test die, die acceptance, delivery, secondary processing through-train service.
公司提供从产品设计、模具设计、模具制造、试模、模具验收、送货、二次加工一条龙服务。
The first 6 plastic parts mold test, there are three more; barrel, cap and end cap should be ready by these few days.
兄弟们，先看看我们已试模的六个零件吧，还有三个；笔管，笔盖，尾盖，这几天应该能试出。
The concrete realization of that management system has 5 function mold pieces: basic information management, personal management, test to manage frequently, the wages management, system management.
该管理系统的具体实现有5个功能模块：基本信息管理、人事管理、考勤管理、工资管理、系统管理。
The microorganism which discovered in the production environment should take regularly uses in the sterility test method confirmation the challenge mold mushroom spawn;
在生产环境中发现的微生物应定期地作为用于无菌检查方法验证的挑战菌种；
The microorganism which discovered in the production environment should take regularly uses in the sterility test method confirmation the challenge mold mushroom spawn;
在生产环境中发现的微生物应定期地作为用于无菌检查方法验证的挑战菌种；
应用推荐