Introduces the calibration technique of fuze shielding transmit-receive isolation, forward transmission and the test method of fuze initiation property in the air to air missile system test.
介绍了空空导弹总体试验中引信屏蔽罩收发隔离度、正向传输插损的标定技术和引信启动特性测试方法。
The simulation test method and assessment technique of parking brake assemblies on the bench are discussed in this paper, the approach for improving the performance of parking brake is also proposed.
探讨了在台架上进行驻车制动器总成的模拟试验方法和评定技术，提出了改善驻车制动性能的途径。
The amalgamation of SRS technique and real-time signal analysis technique gives birth to advanced shock test real-time control system and this system replaces quickly the common method and technique.
冲击响应谱分析技术与实时信号分析技术的融合，先进的冲击试验实时控制系统技术也随之产生并迅速取代普通冲击试验分析方法与试验技术。
METHOD In vitro susceptibility test on tuberculosis bacteria and GC-MS technique were used.
方法体外结核菌药敏试验和气相色谱-质谱联用技术（ GC-MS）。
The main technique employed in the verification subsystem is rewriting induction featuring batch proof method and witnessed test sets.
验证子系统所采用的主要技术是以成批证明方法和证据测试集为特色的重写归纳方法。
The test technique and analysis method were further discussed.
进一步对试验技术及分析方法进行了讨论。
The design method of hardware and software of automatic test system for air data was introduced in this paper and the structure of hardware and software and key technique was also given.
阐述了大气数据自动测控系统的硬件和软件设计方法，介绍了该系统的硬件和软件结构及关键技术，分析了系统的特点和功能的实现。
The operational principle, characteristics, structure of the multifunction device are analyzed as well as the fabrication technique, technical and functional data, measurement and test method.
分析了器件的工作原理、特性和制作工艺特点，介绍了器件的结构、制作方法、工艺参数以及器件的性能指标和测试方法。
This paper introduces the technical requirements, material selection, test method, manufacturing technique and the application of the light weight mould.
介绍了所研制轻化模胎的技术要求、材料选择、配制方法、制造工艺和应用效果。
As a standard DFT method, IEEE 1149.1 boundary-scan technique (BST) provides measures to complex interconnect test and can well make up the shortcoming of traditional test techniques.
基于IEEE 1149.1标准的边界扫描技术(BST)作为一种标准化的可测性设计方法，弥补了传统测试的缺陷，为复杂的电路互连提供了测试手段。
Using the proposed technique the measurement and calculation method of material mechanical deformation direction is described. Finally, the experimental results and test data are given.
给出了一般情况下用本技术测量和计算材料机械变形方向的方法，列出了本技术测量的实验数据和结果。
The method and principle of autonomous location is presented about a pipeline inspection robot, the results of test and location accuracy meet the requirements of inspection technique.
介绍了一种管内探伤机器人自主定位的方法原理，经检验，其定位精度和效果满足了检测工艺的要求。
This article briefly introduces the status quo of ventilation system of Dongxiang Copper Mine, including its technique level, the method to test its economic factors, and the comment on this system.
对东乡铜矿通风系统现状作了简述，介绍了该矿通风系统技术、经济指标测定的方法，并对该矿通风系统作了评述。
In this paper the test technique of protecting time-delay of circuit breaker is discussed and a new online test method is proposed.
对断路器延时保护特性的校验方法进行研究，提出一种断路器在线智能测试校验新方法。
The systematic test principle and realization technique of dynamic balance method for self-driving outer rotor DC motor based on influence coefficient separate method are described in this paper.
描述了基于影响系数分离算法平衡自驱动外转子直流电机的测试系统原理及其实现方法。
On the basis of the above technique and method, a class state test model is presented. Case study and experimental results show that the model can achieve better class state tests.
基于上述技术和方法，提出一种类状态测试模型，实例分析和实验结果表明，该模型能较好地实现类状态测试。
According to test research situation, machining technique has been presented in terms of cutter structural parameters, cooling method for drilled holes and machining technology.
根据试验研究情况，从刀具结构参数、钻孔冷却方式、加工工艺要点等方面详细介绍了高温合金孔的加工技术。
This paper presents the principle, method and data processing technique of the flight test of the lateral-directional stability and control of the Z-8 helicopter.
本文介绍了Z-8横侧稳定性和操纵性飞行试验的原理、方法和数据处理技术。
The method uses laser speckle technique to record the shift amount of speckle patterns due to micro wedge angles, and thus micro wedge cangles of the test piece are induced.
它利用激光散斑技术，记录了由于微小楔角引起的散斑位移量的散斑图，由此导出被测试件的微小楔角。这种方法具有光路简单、非接触、精度高等特点。
The modern knead-salting technique of dry-cured ham was studied by orthogonal test, in test factors salt dosage, salting time and salting method.
通过干腌火腿现代滚揉腌制成套技术装备进行滚揉腌制工艺正交试验，研究用盐量、腌制时间、上盐次数等试验因素对腌制效果的影响。
Therefore the display technique of dendrites is an another importance method used to analyse and test the micro...
枝晶显示技术可作为分析和检验球铁组织与性能的另一重要手段。
Shifting and building method and technique by exchanging slot for sensor in MTS810 fatigue test machine are summarized.
提出了MTS810疲劳试验机中引伸计的换通道转建方法与技术。
The method of grinding wheel wear test and error compensation is presented based on acoustic emission technique in this paper.
提出了一种基于声发射检测技术的砂轮磨损测量及加工误差补偿系统。
In this paper the separation method of combustion noise and mechanical noise, the identification technique of engine noise sources and the engine structure test were discussed.
本文讨论了柴油机燃烧噪声和机械噪声的分离方法；阐述了声源识别技术和发动机结构试验。
This research mainly uses the quantitative analysis and the qualitative analysis union method carries on, and take research technique and so on case analytic method, comparison test as the assistance.
本研究主要采用定量分析与定性分析结合的方法进行，并以案例分析法、比较法等研究方法为辅助。
The method met the demands of the strength and fatigue test tensile-press loading apply technique require of complex aircraft structure. Test results demonstrated that …
试验结果表明，与传统加载所采用的胶布带相比，三种形式加载块的静强度、疲劳性能和加载速率均有明显提高。
The method met the demands of the strength and fatigue test tensile-press loading apply technique require of complex aircraft structure. Test results demonstrated that …
试验结果表明，与传统加载所采用的胶布带相比，三种形式加载块的静强度、疲劳性能和加载速率均有明显提高。
应用推荐