The Optim solutions support an iterative testing model that simplifies specification of error and boundary conditions and simplifies the comparison of test results to baseline data.
Optim解决方案支持迭代测试模型，该模型简化了错误和限制条件说明，以及测试结果与基线数据的对比。
It introduces team members to the underlying principles of test automation tools such as IBM Rational Functional Tester: modular test design, and tool-assisted data entry and data comparison.
它介绍给团队成员有关测试自动化工具的最基本原理，例如IBMRationalFunctionalTester：组件化测试设计，和数据入口和数据比较辅助工具。
Sample test data for ClearQuest Web, comparison between 7.0.1 and 7.1.0.2
ClearQuestWeb7.0.1 版本与 7.1.0.2 版本之间的范例测试数据比较
The data produced from SAR forms your baseline for comparison in future test runs.
sar生成的数据构成以后测试运行中进行比较的基线。
Comparison of calculation results with relevant test data show that the model is essentially effective.
模型计算结果与有关试验数据的对比表明该模型基本有效。
A comparison of the predicted values with test data shows that the method is reasonable and applicable.
计算值与试验数据的比较表明，在工程上应用这种计算方法是适宜的、可行的。
WT615CNG engine was chosen as the simulation research object. Comparison between calculation results and test data shows that the model is basically correct.
以WT 615cng发动机为模拟研究对象，计算结果与试验数据对比分析表明，模型基本准确。
Comparison with test data shows that presumptions by the article are feasible, the method has a high precision and it can be used in the earlier stage seakeeping prediction of conventional catamaran.
经与试验数据比较，证明该方法在精度上是可靠的，本文所作的一些假定是可行的，它可用于预报常规双体船的前期适航性能。
T test was applied for difference comparison among measurement data.
计量资料组间差异比较采用t检验。
Through comparison calculations between FNN simulation and traditional method using exiting test data, the predicted result of FNN is more accurate than that of the latter.
通过对已有的钻芯、回弹试验数据的对比计算，其强度预测精度高于常规的综合方法。
The proposed analysis method is validated through the comparison of the values of excess pore water pressure, piezocone test, theoretical estimates and the data collected in four projects.
最后通过工程实例把孔压静探试验得出的超孔压值、理论值以及现场实测值进行了对比，初步验证了利用孔压静探试验估算沉桩过程中产生的超孔隙水压力的可行性。
Comparison to the experimental data and simulated data is done to test the effectiveness of the model. Proper velocity model is chosen to better guide the sedimentation tank operation.
通过实际数据与模拟数据的比较，来检验该模型的可靠性，并选择合适的沉降速度模型，以期能够运用该软件可以更好地指导沉淀池的实际运行。
The calculated piston wind velocity accords with the measured result on site through making a comparison with tunnel aerodynamic test data of real vehicles.
以实车的隧道空气动力学试验资料为参照进行对比计算，计算活塞风速度与实测结果较好符合。
At the same time, by comparison with the traditional hydrogeological test results, it also proves that the data obtained form the isotope method is reliable.
同时经与传统水文地质试验结果比较，也证明同位素方法获得的数据是可靠的。
By the practice to know:the interlab test comparison is good method on appraising the data consistence of highway laboratory in transportation system.
通过比对试验的实践可知：比对试验是评价我国公路实验室检测数据一致性的较好方法。
Some problems about the ice model test are also discussed by comparison with the observed data from the prototype.
同时对照了原型观测成果，讨论了冰凌运动模型试验中的一些问题。
The comparison of technical test results with simulation data shows their better consistency.
通过工艺试验结果与模拟结果的比较，证明了二者具有较好的一致性。
The measurement data in multiple groups were compared with randomized analysis of variance and the comparison among groups were performed with SNK test.
多组间的计量资料比较采用随机分组的方差分析，组间比较采用SNK检验。
After the experiment, the results of the physics united test of Guizhou province were selected as the data of comparison.
实验结束后，用贵州省高中物理毕业会考成绩进行实验结果检验。
Special control software provides the group sample statistical analysis, test curve superposition analysis, as well as historical data comparison and so on the many kinds of practical function.
专业的操控软件提供了成组试样统计分析、试验曲线叠加分析、以及历史数据比对等多种实用功能。
A comparison of the calculated data with the test data indicates that this model has the merits of less parameters, accurate prediction and wide application.
对该模型得到的理论预测值与实验实测值进行了对比检验，结果表明，该模型具有模型参数少、预测精度高、适用范围广的特点。
The comparison of simulation results with test data for several kinds of soil shows that the proposed model can more precisely reflect the behavior of soil.
以几种土的试验结果为基础将本文模型及邓肯—张模型和软化模型进行了对比，结果表明本文模型能够更好地反映土的应力-应变关系。
By comparison with the data obtained from the field test pit excavation - the effect is satisfactory.
通过与现场探井开挖资料相比较。
The proposed method was verified by a test case where experimental data are available for comparison.
给出的方法用有实验结果的多向不规则波例子进行了验证。
The comparison between calculation and test data shows that the numerical analysis is sufficiently precise.
外特性与试验数据的对比表明，所作的流场计算是十分准确的。
Typical objects of comparison are similar versions of source code, object code, data base files, or test results.
比较的典型对象是源代码、目标(代)码、数据库文件的相似版本或测试结果。
The comparison between simulation results and test data indicates that the calculation of flow field is accurate.
模拟结果与试验数据的对比表明，流场计算是准确的。
The model reflects the actual dynamic characteristics and real operation state of pneumatic tires in motions. The comparison made with test data shows a high precision of the model.
考虑胎体的复杂变形之后，模型能真实地反映轮胎的力学特征和物理实质，理论模型与试验结果的比较也表明，该模型的精度足以反映轮胎的非稳态试验侧偏特性。
The condition and possibility of together use are also analyzed with static load test , train test and comparison among data, and some proposals are put …
在静载试验、动力应变测试、数据对比的基础上，对共同应用的条件及可能性进行了分析，并就出现的施工技术问题提出可行的处理方案。
The condition and possibility of together use are also analyzed with static load test , train test and comparison among data, and some proposals are put …
在静载试验、动力应变测试、数据对比的基础上，对共同应用的条件及可能性进行了分析，并就出现的施工技术问题提出可行的处理方案。
应用推荐