An exact elastic solution for the general case of a circular flange joint under tension loading is derived.
文中推导出一般情况下圆形螺栓法兰接头的弹性解，这一解可被应用于不同类型的接头上。
A method is proposed to simulate the fatigue crack growth by finite element technique for corner cracks under cyclic tension loading.
给出了一种利用有限元技术模拟周期性张力载荷作用下孔边角裂纹扩展过程的方法。
An application of the equivalent strain energy density method for calculation of elastic-plastic notch-tip strains under tension loading is presented.
本文介绍了根据应变能密度原理估计拉载作用下缺口底部应力、应变的方法。
According to principle of damage mechanics, the evolutional law of damage in pearlite ductile cast iron has been studied under fatigue and tension loading.
利用损伤力学原理，研究了珠光体球墨铸铁在疲劳和拉伸载荷作用下的损伤演变规律。
The experimental data of an aluminum alloy under the dynamic tension loading were processed by the improved program, and more reasonable results were achieved.
利用带修正功能的数据处理程序对一种铝合金的动态拉伸实验结果处理，结果表明，新的数据处理程序得到的结果是合理的。
The sensors were installed in the summer of 2009 to monitor tension in the bridge's suspension cables, wind loading and deck vibrations.
这些传感器在2009年夏天安装在这座大桥上，用以监测大桥的吊索紧危状态，风负荷和桥面振动。
Do slow quakes release tension overall in the region? Or do the deep and shallow quakes transfer tension to the middle, "loading" that section for future big ruptures?
慢性地震是把整个地震区域的能量释放出去了吗？还是，把能量传递到中间地带了呢？积攒在这部分等待下次的大爆发？
In long-span tension structures, a lot of tall and heavy masts or columns have to be used to support total or partial roof loading.
日益广泛应用的大跨度张力结构中经常出现一些高度大、负荷重的立柱以支承全部或局部屋面荷载。
The tension from the loading is compensated by compression induced by the prestressing.
从装载的紧张局势是由压缩引起的预应力补偿。
The group improves cargo distribution capacity and eases traffic tension by means of accelerating the construction of strategic loading (unloading) point and regional logistic base;
要通过加快战略装（卸）车点和区域物流基地建设，大幅度提高集疏货物能力，缓解运输紧张局面；
Multiaxial fatigue tests were conducted on 45 steel specimens at room temperature. Thin-walled tubular specimens were subjected to combined tension and torsion loading in low cycle strain control.
通过多轴疲劳试验，研究了在多轴加载条件下45钢的循环特性变化规律。
The crack fractographs of X60 pipeline steel after 10% per-tension deformation under cyclic loading are investigated by the SEM.
用扫描电镜（SEM）分析了X60管线钢在未变形和10%的预拉伸变形后循环载荷下的裂纹断口形貌。
Based on the shear-lag model and the usual loading way, the computation model of interfacial debonding stress under tension-tension cyclic loading is established first.
基于剪切筒模型和常用疲劳加载方式，首先建立了循环荷载作用下钢筋与混凝土界面脱粘应力的计算模型；
The fatigue behavior of concrete under axial tension with constant and variable amplitude cyclic loading is investigated.
基于室内试验，研究了混凝土在等幅和变幅重复荷载作用下的轴拉疲劳性能。
By means of parametric analysis, the effect of loading rate and anchor embedment on suction force and limit value of total tension resistance are discussed.
进而通过变动参数分析，讨论加载速率和埋深对吸力和总抗拉力极限值的影响，并给出排水和不排水加载条件对应的临界加载速率。
The OBBA series single ended bending beam load cell is designed for tension or compression loading applications including hopper scale and conveyor weighing.
OBBA系列单端弯曲梁式称重传感器是专为拉伸或压缩装载应用而设计，包括漏斗称重或输送称重。
The results show that the relative mechanical relationship deduced from "octahedron model" can well be as a token of the metal foams behavior feature the under biaxial equal-loading tension.
研究结果显示，以“八面体模型”推导出来的有关力学关系，较好地表征了该材料在双向等载条件下的行为特点。
A compact specimen is put to the fracture test under tension-shear combined loading.
本文利用紧凑试样在拉-剪复合加载下进行了断裂试验。
Under the loading conditions of uniaxial and slightly biaxial tension, the characteristics of material bifurcations (plane shear banding and surface wrinkling) are demonstrated.
文中揭示了在单向和弱双向加载条件下材料分叉(平面剪切带和表面皱曲)的一些特征。
Complete stress-deformation curves for concrete in tension were obtained from axial tension tests in which some of the specimens were tested under cyclic loading.
本文通过试件的中心受拉试验，测定了砼的受拉应力-变形全曲线。部分试件还进行了反复荷载试验。
The method of uniaxial tension test of concrete under ultra-low loading rate is described. It can be used to determine the characteristic curve of concrete under loading condition.
本文介绍极慢速加荷条件下混凝土轴向拉伸试验方法，它能测定混凝土受载时的特性曲线。
The groove digging mechanism is connected with the loading vehicle through the tension rod and the distance rod.
挖槽机构通过拉力杆、推力杆与载车相连。
Methods: the osteoblast-like cell MG-63 were stimulated with different amplitude by four-point-bend loading device, and the different proliferative index after tension-stress load were studied.
方法：采用四点弯曲细胞力学加载仪对成骨样细胞MG- 6 3分别以不同强度的张应力进行力学刺激，并对其受力后的增殖状态进行了研究。
Methods: the osteoblast-like cell MG-63 were stimulated with different amplitude by four-point-bend loading device, and the different proliferative index after tension-stress load were studied.
方法：采用四点弯曲细胞力学加载仪对成骨样细胞MG- 6 3分别以不同强度的张应力进行力学刺激，并对其受力后的增殖状态进行了研究。
应用推荐