The importance of winding tension control to increase the developed fiber strength is discussed.
讨论了缠绕张力控制对提高纤维发挥强度的重要性。
The applied results indicate that fiber grating strain sensors are effectively able to monitor the tension status about reinforced concrete bowstring arch bridge.
应用结果表明,光纤光栅测力传感器可有效监测钢管混凝土系杆的受力状况。
The test results showed that the influence of drawing ratio, speed and temperature on the tension, tension fluctuation and irregularity of the fiber were obvious.
结果表明,拉伸比、拉伸速度和拉伸温度对纤维张力、张力波动和不匀率均存在着明显的影响。
The factors affecting the crimpability of PAN staple fiber include the overall denier of tows, crimp box height, crimping pressure and temperature, tow tension and width and heat setting temperature.
影响腈纶短纤维卷曲性能的主要因素有丝束总线密度,卷曲箱高度,卷曲压力温度,丝束张力,宽度及热定型温度。
It was conducted that the effect of the dosage of the compound mineral fiber material on air permeability, thickness and tension of the rice paper handmade in this paper.
该文通过实验室对比矿物复合纤维配入量的不同,对比手卷烟纸厚度、透气度、拉力产生的影响。
Next, according as no - gyrating round fiber winding theory and concrete request of vane, analyzing the winding technics, found the mathematics model of tension control system.
根据非回转体环向缠绕理论及叶片产品的具体要求,分析缠绕工艺,建立了张力控制系统的数学模型。
The design principle, basic composition and implementing method of tension control system of digital control fiber winding machine are described.
主要论述了数控纤维缠绕机张力控制系统的设计原理、基本构成及其实现方法。
Polyacrylonitrile carbon fiber (PAN-CF) was tension carbonized at different temperatures and then graphitized.
在不同温度下对聚丙烯腈基炭纤维(PAN CF)进行张力炭化处理并进行高温石墨化。
Monofilament contact Angle meter has been used to measure the critical surface tension of glass fiber treated by different coupling agents.
本文应用单丝接触角测定仪测定了不同偶联剂处理的玻璃纤维临界表面张力。
A kind of fiber tension test of hardware design's method is put forward.
提出一种测试光纤拉力的硬件设计方法。
Fiber tension can be reflected indirectly by measuring axial tension. Therefore the acquisition and processing of axial tension is the core part of fiber tension test.
光纤拉力可以通过测量轴向拉力来反映,因此轴向拉力数据的采集和处理是光纤拉力测试的核心部分。
The tension fluctuation and irregularity of fiber decreases with the increase of drawing ratio, speed and temperature.
增大拉伸比、拉伸速度和拉伸温度能有效地减小张力波动和不匀率。
The proper control of the drawing tension and humidity can increase the fiber mechanical properties.
而适当控制牵伸过程中的张力和湿度的大小,可以提高纤维的力学性能。
Objective To investigate the relationship between optic disc hemorrhage and localized retinal never fiber layer defects (RNFLDs) in normal-tension glaucoma.
目的观察正常眼压性青光眼视盘出血与局限性视网膜神经纤维层缺损(RNFL D)的关系。
But when the total wrap Angle and fiber tension is bigger, fiber will be damaged severely.
过高的总包覆角和纤维张力容易使纤维磨损程度加剧。
It shows the axial tension initial cracking strength of concrete increases with the increasing of steel fiber volume ratio and enhancing of concrete strength grade separately.
结果表明:混凝土轴拉初裂强度分别随钢纤维体积率的增大和混凝土强度等级的提高而增大。
The experiment compare of carbon cloths tension strength with and without glue indicates that the epoxy resin can not only make the fiber adhesive united but also increase the tensile strength.
对比有胶与无胶纤维布拉伸实验,表明环氧树脂不仅粘接纤维布,对纤维布有保护作用,而且能够显著提高其拉伸强度。
Reducing the tension upon the fiber under high temperature to provide enough movement space for polyester segments, which is beneficial to the relaxation of high elastic strain.
适当地降低高温下纤维的张力,为高分子链段的运动提供了活动空间,有利于高弹形变的松弛。
The result shows that resistivity of composites increases with surface tension of fiber. The conductivity and shielding effectiveness of composites can be raised due to the dispersion of…
结果表明,用不同表面处理剂处理不锈钢纤维后,随纤维表面张力增加,复合材料的电阻率增加。
Based on the direct tension test, the characteristics of tension stress-strain full curves of steel fiber reinforced self-stressing concrete were investigated.
通过直接拉伸试验研究了不同自应力等级下的钢纤维自应力混凝土的受拉应力-应变全曲线特征。
The mechanical properties is also tested and analyzed, such as tension properties of fabrics which were knitted with vinylon and glass fiber.
对采用维纶和玻璃纤维编织的增强体的拉伸等性能进行了测试与分析。
The rotor structure of claim 1, wherein said tension bar means are made of a composite fiber material.
转子结构索赔1,其中表示,拉杆手段制成的复合纤维材料。
The tension sensor has unique design, seasonable structure which takes great effects in testing the change of fiber tension in chemical fiber industry and controlling product quality.
这种张力传感器的设计独特,结构合理,将化纤工业中检测纤维张力的变化,控制产品质量起到巨大的作用。
An experimental study is performed on the measuring characteristics of BOTDR for structural health monitoring, including dead weight tension test and optical fiber compression-tension test.
应用BOTDR检测技术对用于结构物健康监测的光纤变形检出特性进行了试验研究,包括光纤锥重拉伸试验和光纤压缩与拉张试验。
The mechanical calculation of ADSS fiber optic cable is introduced and the calculation formulae for sag, tension, strain and slack length etc are given.
介绍了ADSS光缆的力学计算,给出了光缆弧垂、张力、应变和悬长等计算公式,并对普遍采用的“悬链线”和“抛物线”两种计算方法加以比较。
Effect of fiber blemish, the crystal grain size on the tension strength is showed in this paper through the analysis of the structure of the series of MJ carbon fiber.
通过对MJ系列碳纤维纤维结构的分析,确定纤维缺陷、晶粒大小对拉伸性能的影响。
To ensure that we make use of optical fiber, finished product KFRP can sustain tension from the long-term tension 40 N, short-term 80 N, improve long-term 60 N, short-term 100 N.
以确保使用我司KFRP做成的成品光缆,能承受拉力从最初的长期拉力40N短期拉力80N,提高至短期拉力60N,长期拉力100N。
Fiber endoscopy and lower tension duodenography may bring a high diagnostic rate of duodenal tumor.
纤维内镜检查和十二指肠低张造影对十二指肠肿瘤诊出率高;
Next, discussing structuring truth of tension control system, designing that PLC control AC servo-system, achieve may control no- gyrating round fiber winding motion;
讨论了张力控制系统的构成原理,设计了以可编程控制器控制的交流伺服系统,实现该设备的可控非回转体环向缠绕运动;
Next, discussing structuring truth of tension control system, designing that PLC control AC servo-system, achieve may control no- gyrating round fiber winding motion;
讨论了张力控制系统的构成原理,设计了以可编程控制器控制的交流伺服系统,实现该设备的可控非回转体环向缠绕运动;
应用推荐