Are ideal for high temperature welding welding solvent.
是高温焊接中理想的焊接溶剂。
Welded wires with epoxy coat, preventing open circuit under high temperature welding;
外表塑胶封装，里面焊接，高温焊接时杜绝开路；
The effective methods to avoid the cracking include lowering strictly the content of impurity and adopting low temperature welding process.
有效的改进措施是严格控制杂质含量、将高温焊接工艺改为低温焊接工艺。
BOWE Broadway bathroom supply kitchenware industry-specific silver electrode, silver wire, low-temperature welding, silver solder powder, silver paste.
BOWE博威供应橱具卫浴行业专用银焊条，银焊丝，低温焊条，银焊粉，银焊膏。
In this paper the temperature of underwater welding arc is investigated systematically by means of spectral diagnostics of plasma.
本文利用等离子体光谱诊断法对水下焊接电弧温度进行了比较系统的研究。
The results indicate that HAZ produced during welding of grade X80 steel is made up of grads structure under different temperature.
结果表明，X80级管线钢在焊接过程中形成的热影响区由不同温度下形成的梯度组织组成。
In the developed CCD image sensor system, real-time collecting and disposing the welding temperature field image is realized by means of using the method of colorimetric temperature measure.
所研制的CCD图像传感器系统，通过采用比色测温的方法，实现了对焊接温度场图像的实时采集与处理。
Preheating shall be carried out for carbon and low alloy steel welding where required. Preheating temperature shall be kept uniform from the start to the end of welding.
在进行碳钢及低合金钢的焊接时应进行预热。预热温度在焊接开始到结束期间应保持均衡。
The upper limit of the qualification is the highest interpass temperature reached in the welding procedure test.
合格鉴定的上限为焊接工艺试验时达到的最高层间温度。
A welder's kit contains electrode holder, welding torch, helmet shield, portable electrode heating box and temperature measuring pen.
一名焊工的成套工具包括焊钳、焊炬、面罩、手提式焊条加热箱和测温笔。
Handrail frame and Station foot: high quality steel plate, steel stamping and welding molding and polished, rust phosphating, electrostatic powder coating, high temperature baking and other process.
扶手架及站脚：采用优质钢板、钢管冲压焊接成型，并经打磨、除锈、磷化、静电喷粉、高温烤焗等工艺处理。
Welding temperature field was analyzed by using non-linear curve fit method based on experiments.
建立了一种基于试验的非线性曲线拟合的新方法来分析焊接温度场。
Temperature and stress fields of multi-pass welding of orthogonal nozzles were simulated.
对正交接管焊接接头的温度场和应力场进行了数值模拟。
Therefore, the steel is mainly used for low temperature impact of the impact of the components, welding structure and other requirements of higher strength components.
因此，镇静钢材主要用于低温下承受冲击的构件、焊接结构及其他要求强度较高的构件。
Because of this, this kind of steel after welding manipulator welding, its heat treatment to avoid this temperature range.
正是因为如此，这类钢材在经过焊接机械手焊接之后，它的热处理要避开这一温度范围。
Welding temperature distribution was effected by the effective heated radius of the arc regulated by different external longitudinal magnetic intensity.
外加纵向磁场可以改变电弧加热有效半径进而影响焊接温度场分布。
The use of welding simulation different temperature on the welding HAZ toughness variation has been studied.
采用焊接热模拟方法研究了不同温度退火时热影响区韧性的变化。
It can be concluded that the local high temperature can be reduced effectively using the technique of discontinuous welding and smaller residual stresses are obtained.
结果表明，采用间断焊可以有效降低焊接时的局部高温，而且其残余应力也略低于连续焊。
Step one of the welding process is checking the blade temperature.
步骤之一，焊接过程是检查叶片温度。
However, if outdoor temperature is comparatively low, the records preheating aren't required for the welding operation preheating to room temperature.
但由于室外温度比较低，要求预热到室温后再进行焊接操作的焊前预热可不作记录。
The three dimensional welding residual stress and temperature fields in local PWHT are constructed.
构造了三维管接头焊接应力和局部热处理温度场。
A new method for the diagnostics of the welding arc temperature fields is studied on the basis of Plasma physics, laser speckle photography.
根据散斑照相和电弧等离子体物理学原理，研究了诊断氩气焊弧温度场的新方法。
In this paper, relation between electron beam welding parameters and temperature field of beryllium is studied quantitatively with finite element method.
采用有限元方法，定量分析了电子束焊接工艺参数与铍环内表面温度的关系。
The correct description of temperature field during welding processes for quick heating and cooling is prerequisite for analysis of stress-strain of welded joints.
焊件在快速加热和冷却过程中温度场的正确描述是焊后接头力学性能分析的前提条件。
In addition, a calculating method on welding preheating temperature and a selective principle and method on welding component matching are concluded.
同时总结了一套计算焊接预热温度确定方法和焊接接头匹配的选取原则与方法。
Through analysis on inside weld forming and welding procedure of SSAW pipe, it pointed out weld crack is easy to appear in brittle temperature zone in welding pool.
通过对螺旋埋弧焊管内焊缝成型和焊接过程的分析，指出焊缝裂纹易产生在焊接熔池脆性温度区。
According to the asymmetry welding temperature fields and the rigidity of component when welding, we could think it is inevitable that welding would bring remains-strain and remains-stress.
根据不均匀的焊接温度场和施焊时焊接构件的刚性条件，可以认为焊接残余变形和残余应力是不可避免的。
According to the asymmetry welding temperature fields and the rigidity of component when welding, we could think it is inevitable that welding would bring remains-strain and remains-stress.
根据不均匀的焊接温度场和施焊时焊接构件的刚性条件，可以认为焊接残余变形和残余应力是不可避免的。
应用推荐