These will result in local heat accumulation at the outlet of burner, very high temperature of flue gas, uneven distribution of temperature in furnace and damage of nozzles.
这将导致燃烧器出口处热量局部聚集，烟气温度非常高，造成炉内温度分布不均及喷嘴的损坏。
Even when not recycled, sorted trash is easier for incinerators to burn cleanly, because the temperature in the furnace can be adjusted more precisely to minimize the formation of dioxin.
而即使不循环利用垃圾，分类后的垃圾可以让燃烧炉里的温度更精确地与其匹配，从而最低程度降低二恶英，使垃圾焚烧厂的燃烧过程更加清洁。
The temperature system is a class of difficult object, In this paper, an method of control based on the experiment rule for the Si Mo furnace is developed.
温度系统是一类较难控制的对象，例如文中所述硅钼炉的温度控制问题，作者采用经验规则控制方法解决了这类对象的有效控制问题。
The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.
针对织针网带炉淬火，利用有限元分析软件ANSYS，对织针加热过程中的温度变化进行了模拟。
CYCLE time: Amount of time product spends in a furnace at specified temperature for the purpose of carburizing or hardening product.
周期：产品在炉中某特定温度下渗碳或硬化所需要的时间。
It is concluded that to reduce temperature from furnace, shorten time in furnace and control atmosphere in furnace are the key points.
得出结论：降低出炉温度、缩短在炉时间及控制了炉内气氛是关键。
The requirement to flow, pressure, heating temperature and purity of converter gas used in reheating furnace were introduced.
介绍了加热炉在使用转炉煤气作为燃料时，对其流量、压力、加热温度和纯洁度的要求。
The accurate control of the work pieces temperature in vacuum annealing furnace is a typical nonlinear large time delay and cross coupling complicated problem.
而在真空退火的生产过程中，退火工件温度的精确控制是一个典型的非线性、大时滞、强耦合的复杂控制问题。
And the successful application in the resistance furnace temperature control system is obtained.
并在电阻加热炉温度控制系统中获得了成功应用。
The relationship between temperature, carbon loss rate and compression strength of coke in the lumpish section of blast furnace was investigated.
重点研究焦炭在高炉块状带内的抗压强度与温度和反应程度的关系。
This method is used in the temperature control system of horse-shoe flame glass furnace.
并将此方法应用于蓄热式马蹄焰玻璃熔炉的温度控制系统。
The thermal situation for the soaking chamber of CAPL. including heating characteristic. temperature distribution in the furnace and heat equilibrium.
本文介绍某厂CAPL均热室热工工况，包括均热室的供热特点、炉内温度分布及热平衡。
A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理，建立了基于预热燃烧风富氧下铜精炼阳极炉高温烟气热损失数学模型，并根据富氧燃烧风对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
At present, the mainly method used in glass furnace temperature control is PID control.
玻璃窑炉温度系统现有的控制方法主要是传统的PID控制。
The expressions were derived to describe the atomization efficiency in a stabilized temperature platform furnace (STPF).
导出在稳温平台石墨炉内原子化效率的表示式。
In this case the temperature in the furnace is up.
在这种情况下，炉温就会升高。
It is demonstrated that selecting an optimum heat treatment process and making uniform temperature distribution in the furnace is favourable to improving the dynamic properties of aluminum alloy.
试验表明，选择最佳热处理工艺和改善热处理炉温度场均匀分布对提高铝合金力学性能具有重要意义。
The temperature distribution of conveying roller in horizontal tempering furnace was simulated numerically.
对水平钢化炉内传动辊的温度场进行了数值模拟。
Hot ingots are often heated in forging furnaces, the feature of which is one-stage type in a constant temperature furnace and two-or three stage type in a temperature-variable furnace.
锻造钢锭多采用热锭加热，其特点是在恒温炉中一段加热和在变温炉中两段或三段加热方式。
Moreover, the NH4HF2 content in the batch, the temperature distribution in the fiber-drawing furnace, and fiber drawing technology also have influence on the scattering loss of the fiber.
配合料中引入适量NH_4HF_2，选用温度结构合理的拉丝炉及拉丝工艺也有助于降低光纤的损耗。
A monitoring method based on visualized three dimensional temperature field of combustion in the furnace has been presented.
介绍了一种基于炉内燃烧三维温度场可视化的监测方案。
Using the counting outcome and method of enforce heated in the furnace guide the produce, the temperature distribution is in keeping with hot rolling technology and improves the quality of products.
将理论计算结果与炉内局部强化加热的供热方法相结合，使钢坯进轧机的温度分布均匀性有明显改善，满足了工艺要求，提高了产品轧制质量。
The stainless steel out \ | gassing rates can be reduced greatly by high temperature degassing technology in a vacuum furnace.
真空炉高温除气工艺可以大大降低不锈钢出气率。
The metal is cooled in the air, having been heated to a definite temperature in the furnace.
金属在炉子里加热到一定温度后放在空气中冷却。
Practice shows that the infrared thermometer can be used for accurately measuring glass melt and plate temperature, which plays an important role in stabilizing temperature inside glass furnace.
实践证明，红外测温仪在优质浮法玻璃生产过程中，能直接精确检测玻璃液或玻璃板的温度，为稳定工艺温度制度起到重要作用。
The temperature collect and control system for electric heating furnace in Semi-Solid Metal Processing is introduced.
介绍了半固态金属加工中使用的电加热炉的温度采集与控制系统。
This paper introduces an example of PLC in fuzzy control Temperature control of steel plate anneal furnace.
本文介绍了P LC在模糊控制中的一个实例，即钢板退火炉的炉温控制。
This paper introduces an example of PLC in fuzzy control Temperature control of steel plate anneal furnace.
本文介绍了P LC在模糊控制中的一个实例，即钢板退火炉的炉温控制。
应用推荐