Then proper means shall be taken to temperature holding and slow cooling.
然后采用适当措施保温、缓冷。
Study on technological conditions such as sintering temperature holding time and the particle diameter which impact the whiteness.
讨论了工艺条件如烧成温度、保温时间、颗粒直径对试样白度的影响。
Microstructure determined by both sintering temperature and high temperature holding time would influence acid corrosion resistance.
研究表明陶瓷烧结温度和保温时间均对陶瓷的显微结构有影响，进而影响陶瓷的耐酸腐蚀性能。
This paper discusses the influence of liquid adding rate, temperature holding time, flake treating manner and temperature on cladding rate.
讨论了滴液速率、保温时间、鳞片的处理方式及温度对包覆率的影响。
Results indicated that activation temperature, temperature holding time and activation agent ratio determined the depth of activation and the micropore distribution.
实验结果表明，活化剂用量、活化温度和活化时间都决定着活化反应的深度。
The significant external factors affecting acid-catalytic ethanol pulping of wheat straw were ethanol consistency, pulping temperature, acid dosage and temperature holding time.
影响酸催化乙醇法制浆的主要因素有液比、蒸煮温度、乙醇浓度、催化剂用量和保温时间。
The mathematic models of the temperature holding of continuous cast ingot in the pit and the in line control are established, and the temperature holding effectiveness of the pit discussed.
建立了保温坑内连铸坯保温过程数学模型及在线控制数学模型，并讨论了保温坑的保温效果。
With the Copenhagen talks intent on holding temperature rises to 2c, Huq warned that further extreme weather events and disasters were inevitable.
对于哥本哈根谈判致力于控制气温升高2摄氏度，胡克警告说，更极端的气候事件和灾难不可避免。
Then we can take the derivative of that quantity, when we vary the temperature, holding the volume constant.
即恒定体积，改变温度，这里恒定温度下。
The rate of antioxidant degradation is affected by extrusion temperature, holding time, heating methods and the activation energy of the antioxidants.
挤压稳定化温度、保温时间、加热方法和抗氧化组分的活性能影响抗氧化组分的分解速率。
Generally we considered the affection elements of the temperature test results, is the temperature, holding time, temperature change rate and so on.
通常认为，影响温度试验效果的要素有温度、停留时间、温变率等。
Holding temperature and time shall follow the requirements specified in Table 1.
保温温度和时间应遵照表1指定的要求。
The influence of synthesis temperature and holding time on synthesis was investigated.
研究了合成温度和恒温时间对反应过程的影响。
Effect of sintering temperature and sintering holding time on green density was analyzed.
分析了烧结温度和烧结保温时间对压坯密度的影响。
The results show that heating temperature and holding time are two important factors affecting the grain size and uniformity.
实验表明，加热温度和保温时间是影响晶粒尺寸和均匀性两个重要的因素。
The result indicates that under different quenching temperature and holding time, the formed bainite morphology are different.
结果表明，在不同淬火温度和保温时间下形成不同的贝氏体形貌。
The influence of brazing temperature and holding time on microstructure and tensile strength was studied.
研究了钎焊温度和保温时间对钎焊接头组织和性能的影响。
The effects of the aging temperature and holding time on the microstructure and hardness of the ultra-low-carbon steel bearing copper were investigated.
研究了时效温度和保温时间对时效硬化型超低碳含铜钢的显微组织和硬度的影响。
The microstructure of AZ61 magnesium alloy by strain-induced melt activation (SIMA) process was studied to reveal the effects of prior compressive deformation, isothermal temperature and holding time.
研究了AZ61镁合金在应力诱发熔体激活法(SIMA)制备半固态坯料过程中预变形量、等温温度和保温时间对其组织的影响。
The effects of solid-solution temperature and holding time on the grain growth and hardness of GH4169 superalloy were investigated.
研究了热处理温度和保温时间对GH4169合金晶粒长大规律和硬度的影响。
The effects of particle size, synthesis temperature, holding time and flowing gas atmosphere were studied.
研究了粉末颗粒、合成温度、保温时间和气氛对合成产物氮含量的影响。
The effect of heating temperature, holding time and cooling mode on its crystallizability and dissolution rate of potassium is not obvious.
改变合成温度、保温时间以及冷却方式等，对合成试样的结晶性能以及试样中钾元素溶出率的影响很小。
The effects of baking temperature, holding time and binder on secondary luminescence properties of phosphor were systematically explored.
研究了烧结温度、保温时间以及粘结剂对荧光粉二次性能的影响。
In this paper, the effects of calcination temperature, holding time and content of dolomite on the strength and expansion rate of cement mixed with calcined dolomite are investigated.
研究了白云石的煅烧温度、保温时间以及掺量等对水泥物理性能和膨胀行为的影响规律。
The processing parameters of PEEK composites include cooling rate, forming pressure, forming temperature and the holding time in melt.
其成型工艺参数包括冷却速度、成型压力、成型温度、保温时间。
By changing heating temperature and holding time, the austenite grain growth behavior of a low carbon steel under different heating conditions was studied.
通过改变均热温度和保温时间，研究低碳钢的奥氏体平均晶粒尺寸与时间的关系，及奥氏体晶粒各尺寸范围的分布规律。
The result shows that the decarburization depth increases with the increase in temperature and holding time for the two steels.
结果表明，两种弹簧钢的脱碳深度随提高加热温度和增加加热时间增大。
The result shows that the decarburization depth increases with the increase in temperature and holding time for the two steels.
结果表明，两种弹簧钢的脱碳深度随提高加热温度和增加加热时间增大。
应用推荐