The Division Coatings Ltd. to high temperature coating non-stick coating and the production as the main item.
汇科涂料有限公司以耐高温涂料及不粘涂料的生产为主要项目。
By adding some suitable pigment and fillings into this polymerization, a new type high-temperature coating was synthesized.
以此共聚物为成膜物，再采用合适的固化剂，添加适当的颜填料配成涂料。
The application of MoSi_2 to high temperature structural materials, heating elements and high temperature coating is reviewed and the development direction is prospected.
着重评述了利用该工艺制备多种体系高温结构材料的研究现状，最后对未来的发展趋势作出了客观的评价与展望。
Stir or agitate the coating sample to assure uniform temperature and density.
搅动和摇动涂料样品以保证统一的温度和密度。
With compressed air temperature drop, the excess oil vapour condenses into liquid oil, to make the powder coating system problems.
随着压缩空气温度降低，多余的油蒸气将凝结成液体油，从而使粉末涂装系统出现问题。
Minimum and maximum temperature limits for the coated surface and for ambient air shall be supplied by the coating material supplier and must be followed.
对涂层表面和环境空气的最大温度和最小温度的限制应当由涂层材料供应商提供，并应严格遵守。
The ability of the coating to maintain uniform physical and chemical properties subject to the manufacture 'rs specification (time and temperature).
在产品说明书中的保持涂料的物理和化学性能的能力(温度和时间)。
Conventional CVD coating process requires a metal compound that will volatilize at a fairly low temperature and decompose to a metal when it contacts with the substrate at higher temperature.
常规的化学蒸发沉淀涂层工艺需要一种容易在相当低温度下挥发并且在较高温度下与基体接触时能分解成纯金属的金属化合物。
In general, the Lord salt concentration, temperature increase coating, and under the condition of mixing, can allow the more current density.
一般情况下﹐主盐浓度增大﹐镀层温度升高﹐以及有搅拌的条件下﹐可以允许采用较大的电流密度。
Handrail frame and Station foot: high quality steel plate, steel stamping and welding molding and polished, rust phosphating, electrostatic powder coating, high temperature baking and other process.
扶手架及站脚：采用优质钢板、钢管冲压焊接成型，并经打磨、除锈、磷化、静电喷粉、高温烤焗等工艺处理。
The interval of the coating time is determined by the temperature at the time of construction and the degree of curing of the film (by hand).
重涂时间的间隔，由施工时的温度和涂膜固化的程度（以手触不粘）来确定。
Key problems on energy saving of high emissivity coating at middle temperature are discussed.
本文论述高发射率涂料在中温下使用，节能的若干关键问题。
Application status of a new homemade coating for steel billet in high temperature dynamic process was introduced.
介绍了一种自主开发的动态过程钢坯高温防氧化涂料的应用状况。
In order to improve the fluidity of hot dipping liquid at low temperature, avoid coating thickness, and improve the coating appearance, pure aluminum often participate in 0.01% ~ 0.02%.
为了提升在较低温度下热浸镀液的流动性，避免镀层过厚，并进步镀层外观，常常参加0.01% ~ 0.02%的纯铝。
The optimum sampling conditions were investigated, including the polarity of fiber coating, sample amount, equilibrium temperature and time etc.
探讨了最佳的取样条件（包括不同极性涂层的纤维头、样品量、平衡温度、平衡时间等）。
Technological process and formula of the coating is presented and effects of reaction temperature on coating performance discussed.
介绍了该涂料的生产工艺和配方，讨论了反应温度对其性能的影响。
The distribution of temperature was given at different times for coating and substrate.
给出了涂层和基体在不同时刻的温度场分布和变化规律。
To avoid forming layer defect, rising pouring temperature are using improved coating and selecting low density styrofoam pattern are a great help.
提高金属液浇注温度及改良涂料，选用低密度泡沫塑料作模样材料对避免产生分层缺陷有帮助。
Use it as a coating has moisture resistance, high temperature, corrosion and other special features, and can be formulated with different colors and shiny.
用它作涂料有耐潮、耐高温、耐腐蚀等特殊功能，又可以配制出不同色彩，光彩照人。
Then the radiometer antenna temperature of coating stealth material was modeled.
在此基础上建立了涂层隐身材料的辐射计天线温度模型。
Results show that thermal fatigue behavior is associated with circle temperature and coating thickness.
结果表明，复合涂层的热疲劳行为与热循环上限温度、涂层厚度有关。
An automatic detection system for measuring the surface temperature of solar heat-reflecting coating and the liquid content temperature in the tank covered with the coating.
介绍了用于测量反射太阳热涂层表面温度和涂有反射太阳热涂层贮罐内装液体温度的自动检测系统。
According to the experiments, the effects of coating paint on regenerator are analyzed, and the effects of temperature on infrared coating paint. It was found optimum range of temperature.
通过试验分析得出涂料对格子砖蓄热能力的影响，并分析温度对红外涂料效果的影响，得出涂料使用的理想温度范围。
Cartons, cardboard resistance broken meter, temperature tracker, coating thickness gauge, hardness and a high degree of regulation, and other devices.
纸箱、纸板耐破度仪、炉温跟踪仪、涂层测厚仪、硬度计、高度规等测试仪器。
Room temperature cured fluorocarbon coating was applied as anti-corrosion coat in newly built urea prilling tower of Lianxing Chemical company, Mianyang city, Sichuan province, China.
四川省绵阳市联星化工公司新建的尿素造粒塔选用了常温固化型氟碳漆对其内外壁进行了防腐涂装。
At the same temperature, the dipping time is longer, the greater the coating thickness.
在同一温度下，浸镀时间越长，镀层越厚。
The mineral coating kept more than 80 percent of the yeast cells alive after a month at room temperature.
在室温条件下，一个月之后矿物质在酵母表面的覆盖率超过了80%。
Methods:Samples were dried at room temperature after coating films, followed by freezing, hardening. 4% acetic acid was used to extract metals in treated samples.
方法：试样经涂膜使用温度下干燥、冷冻硬化粉碎，4%乙酸浸泡处理，石墨炉原子吸收测定胶粘剂可溶性钡、镉、铬、铅含量。
Methods:Samples were dried at room temperature after coating films, followed by freezing, hardening. 4% acetic acid was used to extract metals in treated samples.
方法：试样经涂膜使用温度下干燥、冷冻硬化粉碎，4%乙酸浸泡处理，石墨炉原子吸收测定胶粘剂可溶性钡、镉、铬、铅含量。
应用推荐