Nanocrystalline nickel was synthesized by direct current electrodeposition. The microstructure of nanocrystalline nickel was studied by TEM and X-ray diffraction.
采用直流电沉积法制备了纳米晶体镍，用TEM和X -射线衍射等方法研究镀镍层的微观结构。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
The effect of Si on the crystal lattice parameters, lattice volume and crystal defects of the eutectic cementite in malleable cast iron has been studied by using X ray diffractometer and TEM.
采用X-射线衍射仪、透射电镜研究了可锻铸铁白口组织中硅对共晶渗碳体点阵参数、晶胞体积及晶体缺陷的影响。
Transmission electron microscope (TEM), Raman spectroscopy and X ray diffraction (XRD) were used to investigate the lattice structures, phonon properties of the samples.
通过透射电境、X光衍射和拉曼散射对纳米晶的晶格结构和声子特性进行了研究。
The structure and component of coating were analyzed by FTIR spectra, X ray diffraction (XRD) and transmission electron microscopy (TEM).
采用红外光谱、X射线衍射和透射电镜对涂层的组成和结构进行了分析。
They were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM).
产物经x -射线粉末衍射(XRD)、透射电子显微镜(TEM)和高分辨电子显微镜(HRTEM)表征。
The microstructure of carbon fibers has been studied using X-ray diffractometer (XRD), transmission electron microscope (TEM) and high-resolution transmission electron microscope (HRTEM).
利用X射线衍射(XRD)、透射电子显微镜(TEM)、高分辨电子显微镜(H RTEM)研究了碳纤维的微观结构。
The sample's crystal phase, structure, morphology and the reaction process were characterized and analyzed by using X-ray diffraction(XRD), transmission electron microscopy(TEM).
采用X射线衍射（XRD）、透射电子显微镜（TEM）分析手段对样品的物相、结构、形貌进行了表征和分析。
The product of FSP is characterized by transmission electron microscopy (TEM) and X-ray powder diffractometer (XRD).
通过透射电镜(tem)和x -射线衍射仪(XRD)对所得片状银粉产物进行了表征。
The structural change of PAN based carbon fibre by an electric current pulse was studied by means of X-ray diffraction(XRD) and transmission electron microscopy(TEM).
用X射线衍射（XRD）、透射电子显微镜（TEM）等技术研究了PAN基碳纤维在单电流脉冲作用下的结构变化。
The microstructure of rayon-based carbon fibres electrochemically oxidized in different electrolytes was studied by TEM, XPS and X -ray diffraction methods.
本文用TEM、XPS和X射线衍射法研究了电化学氧化后粘胶基碳纤维的微结构。
In addition, the microstructure of the MgO thin films were examined with X-ray diffraction (XRD), Atomic Force Morphology (AFM) and Transmission Electron Micrograph (TEM).
同时，用X射线衍射(XRD)、原子力显微电镜(afm)和透射电镜(TEM)对薄膜的微观结构进行了分析。
They have been characterized respectively by transition electronic microscope (TEM), X-ray powder diffraction (XRD), field induced surface photovoltage spectrum (FISPS).
对其进行了透射电镜(tem)、X射线粉末衍射(XRD)，场诱导表面光电压谱表征(FISPS)。
X-ray powder diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM) and photoluminescence spectra were used to characterize the resulted BAM phosphor.
通过X射线粉末衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）以及荧光光谱对获得的试样进行了表征。
The morphology, structure, and photoluminescence(PL) of the phosphors were investigated by transmission electron microscope(TEM), X-ray diffraction(XRD), emission spectra, and decay time.
以X射线衍射（XRD）、透射电子显微镜（TEM）、发射光谱和衰减时间谱等手段表征材料性能。
Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were used to evaluate the structure and composition.
利用扫描电子显微镜(sem)、透射电子显微镜(tem)和X射线光电子谱(XPS)对样品的形貌、结构及组份进行表征。
The thermal decomposition products were characterized by the powder X-ray diffraction (XRD) and transmission electron microscopy (TEM).
运用X -射线粉末衍射(XRD)、透射电镜(TEM)等技术对碱式碳酸铜热重分解产物进行了表征。
All the samples obtained were examined with X-ray diffraction, isothermal adsorption of water, DTA, TG, IR, TEM, and chemical analysis, and were identified as L-type molecular sieve.
产物经X射线衍射，水的等温吸附、差热分析、红外图谱，透射电镜以及化学分析等测定证实为L型沸石。
The microstructure was investigated by X-ray diffraction and TEM analysis.
采用X射线衍射和透射电子显微镜研究了试样的显微结构。
Transmission electron microscopy(TEM) and X-ray diffraction(XRD) are employed to investigate the morphology and microstructures of carbon nanotubes.
用扫描电镜（TEM）和X射线衍射（XRD）研究了碳纳米管的形貌和微结构。
The structure and morphology of the resulting powders were characterized by XRD, SEM and TEM, respectively. In situ X-ray diffraction measurements was used to analysis NTE property.
以XRD、SEM和TEM对产物结构及形貌进行表征，以原位X射线衍射分析粉体的负热膨胀特性。
The plasticity, chemical composition, particle size and its distribution, whiteness and so on of jiulong kaolin were measured and analyzed by X-ray and TEM.
测定了九龙高岭土的可塑性、化学组成、粒度及其分布、白度等，并且做了X—射线和透射电子显微镜分析。
The precipitate precursor and phase transformation was characterized by TEM and X-ray diffraction.
使用透射电镜和X射线衍射对先驱沉淀物的形貌及煅烧过程的相转变进行了研究。
The reaction process was followed by X-ray powder diffraction, TEM and UV-Vis spectroscopy.
利用X射线衍射、透射电子显微镜和紫外-可见光谱等手段跟踪反应过程。
The GNFs have been characterized by UV-visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and electrochemical measurements.
我们已经通过可见紫外光谱、透射电子显微术、X射线衍射和电气化学测量法对金纳米花的特性进行了分析。
This paper using TEM and X-ray diffraction system analysed and studied the tissue constitution of impulseelectroless's Ni-Pplating and its conversion when heated at different temperature.
本文采用TEM和X射线衍射仪分析研究脉冲化学镀高磷镍合金镀层及经不同温度加热时镀层组织结构的转变。
The ultrasonic wave processing diatomite is analyzed with X - ray diffraction and TEM.
超声波处理的硅藻土进行了X-衍射分析和透视电镜观察。
Microstructure and stress of broad-beam laser hardened gear was studied with SEM, tem and X-ray stress analysis system.
利用扫描电镜、透射电镜和X射线应力分析系统，对齿轮宽带激光淬火后淬硬层显微组织和应力特性进行了细致分析。
Nuclear magnetic resonance (NMR) imaging, X-ray absorption fine structure (XAFS) analysis, transmission electron microscope (TEM), and photocatalytic property testing were carried out.
利用核磁共振仪、扩展X射线吸收精细结构分析、透射电镜对溶胶中的锐钛矿晶体进行深入分析，并考察了锐钛矿晶体的光催化活性。
The two multilayers had ordered particles both on planes and in layer by layer, which were confirmed by TEM images and small-angle X-ray diffraction measurement.
这两种多层膜经透射电子显微镜和小角X射线衍射测量证明构成多层膜的单层膜上的纳米金颗粒是有序的，并且颗粒在层与层之间的排列也是有序的。
应用推荐