This bases an experimental foundation for applying TEM method to water area and sea area to carry the towed Marine electromagnetic exploration.
为TEM法应用到水域以及海域进行海洋拖曳式电磁法勘探奠定了实验基础。
Abstract: The principle of TEM and realized method is introduced.
文摘：介绍瞬变电磁仪的原理及实现方法。
The principle of TEM and realized method is introduced.
介绍瞬变电磁仪的原理及实现方法。
Using an improved method of fixation, the stagnant layer on the peritoneal surface could be observed under TEM.
本文介绍使用了改良的固定方法，在透射电镜下第一次观察到了该活性层的存在。
At the same time, the method has also laid the foundations of initial model definition in TEM automatic inversion.
与此同时，该方法的实现也为瞬变电磁自动反演中初始模型的构制奠定了基础。
As an important geophysical tool, the transient electromagnetic method (TEM) has been widely used for exploration of Cu-polymetallic sulfide deposits.
瞬变电磁法在矿产资源等勘查领域已广泛应用，成为寻找铜多金属硫化物矿床的重要方法。
Microphase separated structure of blends has been determined by means of VES. DSC, SEM and TEM. Blood compatibility of the blends was evaluated by column beads method.
采用动态力学谱（VES）、示差扫描量热（DSC）、透射电镜（TEM）和扫描电镜（SEM）等测定共混物的微观结构，采用微球柱法评价共混物的血液相容性。
The resolution index of electron diffraction in TEM is analyzed. The exactly experimental method is given for demarcating electron diffraction camera length by Gold-monocrystal in TEM.
同时对TEM中的电子衍射分辨率指数进行了分析和讨论，并给出了实际应用金单晶标样精确标定TEM电子衍射相机长度的实验方法。
A method of preparing the section of eye tissue for transmission electron microscopy (TEM) is recommended.
介绍一种眼组织透射电子显微镜标本制备方法。
The latter was investigated by the phosphomolybdate blue method, high_resolution TEM and XPS spectrum.
后一个阶段的水解机理用磷钼蓝法、高倍透射电镜和XPS图谱等进行了探索。
The characteristic impedance of rectangular coaxial transmission lines supporting TEM modes is calculated by using multi-grid method with V-cycle and W-cycle.
本文用V循环和W循环的多重网格法计算了同轴矩形tem传输线的特性阻抗。
A method of generalized capacitance matrix is presented in this paper, which can be used to calculate TEM transmission line comb-line filter and interdigital filter.
本文提出一种广义电容矩阵的方法，用以优化设计TEM传输线梳状及交指滤波器。
The effect of septum brace bar on the characteristic impedance of TEM cell was analyzed by boundary element method (BEM) in this paper.
采用边界元法分析了芯板支撑对TEM传输室特性阻抗的影响。
The inversion calculation method for the transient electromagnetic (TEM) field underground generated by a large loop on the ground is presented in this paper.
本文研究了地面大回线源在地下形成的瞬变电磁场的反演方法。
The method of conformal transformation combined with some approximate treatmentshas been used to solve many TEM transmission line problems.
与一些近似处理相结合的保角变换方法已被用来解决许多TEM传输线的问题。
Based on analysis of calibration method of dynamometer and processing sys - tem. a set of calibration device is designed.
本文在研究切削测力仪的标定方法及分析测试系统的基础上，设计出一套标定装置。
This paper has introduced method of specimen preparation and structure showed about this Ti(C, N) based cermet. Its microstructure and TEM phase has been discussed and compared.
探讨了这种材料金相试样的制备方法、显微组织浸蚀剂的选择，并对其光学金相组织特征与TEM相进行了论述和对比。
A numerical method for solving the dynamic response of a complex structural sys tem is presented in the paper.
本文提出了一种求解复杂结构系统动力响应的数值计算方法。
The preparation method of carbon film in transmission electron microscopy(TEM) was stated. The influence factors on quality of carbon film were discussed.
阐述了透射电镜中碳膜的制备方法，并讨论了影响碳膜质量的因素；
The forward calculation method for the underground transient electromagnetic (TEM) field generated by a large loop on the ground is presented in this paper.
本文讨论了地面大回线源在地下形成瞬变电磁场的正演计算方法。
The fundamental principle of transient electromagnetic method (TEM) is introduced and several general geophysical methods applied to the evaluation of seismic safety are discussed in the paper.
介绍瞬变电磁法的方法技术和应用特点，通过工程实例，对该方法的应用效果及相关技术问题提出自己的认识。
The simulation results show that the method proposed by the paper can use the full dynamic information of weighing sys- tem to obtain the steady values of weighing data.
仿真结果表明该方法可以充分利用称重系统的动态信息求得称重数据的稳态值。
To realize TEM imaging is a good way of improving the transient electromagnetic method prospecting precision.
实现瞬变电磁对地下介质的成像是提高瞬变电磁法探测精度的有效途径之一。
Combining the concept and technology of workflow, this paper gave a new method of designing production management sys-tem.
结合工作流的概念和工作流技术，提出了一种新的企业生产管理系统的设计方法。
There are mainly two kinds of method to solve the stability issue of electric power sys-tem thus far, one is step by step integral method, the other is directive method based on Liyapunov theory.
电力系统稳定性问题的求解，迄今主要有两种方法：逐步积分的数值解法和利用李雅普·诺夫直接法理论的求解法。
First, the SSL protocol and tool storeroom at present, are introduced and then aimed at the characteristic of embedded sys - tem, a design method to suit embedded browser is put forward.
首先介绍了SSL协议与现有的工具库，然后针对嵌入式系统的特点，提出了一种面向嵌入式浏览器的设计方法。
The control scheme and method introduced in this paper may be generally applied to different kinds of the tem…
本文介绍的控制方案和方法可推广应用到各种电加热炉的温度控制及慢时变系统中。
Contraposing the feature and the special demand of autocontrol section in automatic rudder experiment sys-tem, this paper illustrates its general method of designing and process of implementation.
文章针对自动操舵仪测试系统自动控制部分的特点，结合舵机试验的特殊要求，说明了系统的整体设计思想与实现过程。
Contraposing the feature and the special demand of autocontrol section in automatic rudder experiment sys-tem, this paper illustrates its general method of designing and process of implementation.
文章针对自动操舵仪测试系统自动控制部分的特点，结合舵机试验的特殊要求，说明了系统的整体设计思想与实现过程。
应用推荐