AAO template and Ni nanoarray are characterized by XRD, tem and SEM.
并对制备出的氧化铝模板及镍纳米阵列进行XRD,TEM及SEM表征。
Morphological structures of these blends were investigated by TEM and SEM.
用电子显微镜(TEM、SEM)考察了共混体系的形态结构。
The powders after and before being broken were observed directly by TEM and SEM.
用TEM和SEM对剪切破碎前后的粉末进行了直接观察。
The fracture process and interface of the composites were also observed by TEM and SEM.
混凝土是一种典型的非均匀准脆性材料，其断裂过程是非常复杂的。
The average particle size and the shape of sample were characterized by XRD, TEM and SEM.
采用XRD、TEM、SEM等测试手段对样品的物相粒径形貌进行了表征。
The substructure and the fracture process of mullite ceramics were studied by TEM and SEM.
用透射电镜和扫描电镜研究了莫来石陶瓷的亚结构特征和断裂过程。
The aging precipitant and fracture topography were observed under TEM and SEM. The mechanism of fracture of samples was analysed.
在透射电镜和扫描电镜上观察分析了合金析出物的特征和冲击试样的断口形貌及断裂机制。
The structure of the magnet was investigated by XRD, optical microscope, TEM and SEM, and its demagnetization curve was tested by magnetograph.
用X射线衍射仪、光学金相显微镜、透射电镜和扫描电镜研究了磁体的结构； 用磁强自动记录仪测量了磁体的退磁曲线。
The ultrastructure of hairs of the unknown animals in Shennongjia area is studied in comparison with those of mammals and human with TEM and SEM.
本文用透射电镜和扫描电镜对四川巫溪县靠近神农架等地的“奇异动物”毛发和现代人及其它灵长类、哺乳类毛发进行了亚显微结构比较研究。
Dispersion of powdered rubber in modified PP is studied by TEM and SEM. Meantime, the effect of powdered rubber on crystallization of PP is studied by DSC.
利用TEM和SEM考察了改性PP中粉末橡胶的分散状态，同时采用DSC研究了粉末橡胶对PP结晶性能的影响。
The microstructures transformation laws and fractures mechanisms of low carbon silicon-manganese TRIP steels in simple tension state were researched by using TEM and SEM.
采用TEM和SEM研究了低碳-硅-锰系TRIP钢在单向拉伸状态下的组织转变规律和断裂机制。
Using the testing method of PL spectra, XRD, TEM and SEM, the properties of composite phosphor were identified, including spectrum, structure, granularity and appearance.
利用PL光谱、XRD、TEM、SEM分析手段，对纳米复合荧光粉的光谱、结构、粒度、形貌进行了表征。
The application of electron microscope, including STM, TEM and SEM, in the study of rubber blending, fracture morphology and carbon black structure were reviewed with 39 references.
综述了电子显微镜在弹性体共混、橡胶断裂形态及炭黑结构等方面的应用。
The evolution of the microstructure and mechanical properties as functions of annealing temperature and aging T73 temper were studied. The grains and second phases were characterized by tem and SEM.
研究了锻件的显微组织和力学性能随退火温度和T73回火的变化，TEM和SEM用于分析锻件的晶粒和第二相形态。
The dominant structures of ependyma of cerebral aqueduct in the rabbit are the cilia, microvilli, spherical structures and three types of the supraependymal cells that were observed with SEM and TEM.
以扫描与透射电镜观察家兔中脑水管室管膜上皮，主要有纤毛、微绒毛、花球状和泡球状结构，以及三种室管膜上细胞。
The process of polymerization of silicic acid was observed by transmission electron microscope (TEM) and scanning electron microscope (SEM).
用透射电子显微镜（TEM）和扫描电子显微镜（SEM）观察了硅酸溶胶的聚合过程。
The microstructure of zirconia coating deposited by plasma spraying technique was studied by means of FESEM, SEM, TEM and XRD.
利用透射电镜(TEM)、扫描电镜(sem)和X射线衍射仪(XRD)等分析技术，表征了等离子喷涂氧化锆涂层的显微结构。
The structure of the carbon nanotubes was represented with SEM and TEM.
利用SEM和TEM对纳米碳管的结构进行了表征。
The products obtained at different conditions were characterized by means of TEM, SEM, XRD, EDS and the thermal stability of the products was tested.
用TEM、SEM、XRD和EDS等对不同工艺条件下获得的产物进行了表征，对其热稳定性进行了测试。
The changes of ultrastructure were observed by SEM and TEM.
扫描电镜和透射电镜观察细胞超微结构的变化。
The metallographic structures of Cu-Zn powder under different conditions were studied by SEM, TEM and XRD in this paper.
采用SEM、TEM及XRD等方法研究了铜锌粉末在不同制备阶段时的金相组织。
XRD, SEM, TEM and the nitrogen adsorption tests are used to characterize the composite nano-water-purifying material.
利用XRD、SEM、TEM及氮吸附等多种测试手段对所制得的复合纳米净水材料进行表征。
Mechanical properties testing, SEM and TEM was used to study the effects of cold rolled reduction and aging temperature on the cohesion of the weak interface of DISC.
通过力学性能测试、扫描电镜及透射电镜观察，研究了冷轧压下量及时效温度对内生复合钢板弱界面结合强度的影响。
The morphologies and structures obtained the anodized aluminum films were characterized by scanning electron microscopy (SEM). Transmission electron microscopy (TEM) and atom force microscopy (AFM).
并用扫描电子显微镜(sem)、透射电子显微镜(TEM)和原子力显微镜(afm)对阳极氧化铝膜的形貌和结构进行了表征。
The phase structure, morphology and domain-structure of samples are investigated using XRD, SEM and TEM respectively.
同时利用XRD,SEM和TEM分别对陶瓷的相结构，形貌和畴结构进行了研究。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
The XRD, SEM, TEM, and HRTEM are employed to analyze the morphology and structures of GaN nanostructures.
用XRD、SEM、TEM和HRTEM对氮化镓纳米结构表面形貌和微结构进行了分析研究。
The morphology and crystalloid structure of zinc oxide nanowire arrays were characterized by SEM, TEM and XRD.
用扫描电镜（SEM）、透射电镜（TEM）和X射线衍射仪（XRD）对氧化锌纳米线的形貌、结构以及相组成进行了分析。
The morphology and crystalloid structure of zinc oxide nanowire arrays were characterized by SEM, TEM and XRD.
用扫描电镜（SEM）、透射电镜（TEM）和X射线衍射仪（XRD）对氧化锌纳米线的形貌、结构以及相组成进行了分析。
应用推荐