The dominant structures of ependyma of cerebral aqueduct in the rabbit are the cilia, microvilli, spherical structures and three types of the supraependymal cells that were observed with SEM and TEM.
以扫描与透射电镜观察家兔中脑水管室管膜上皮，主要有纤毛、微绒毛、花球状和泡球状结构，以及三种室管膜上细胞。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
Effect of martensite volume fraction on deformation dislocation structure and fracture for hot rolled dual-phase steel of the same composition was studied by using SEM and TEM.
利用SEM、TEM研究了同一成分的热轧双相钢的马氏体体积分数对形变位错结构和断口组织特征的影响。
The process of polymerization of silicic acid was observed by transmission electron microscope (TEM) and scanning electron microscope (SEM).
用透射电子显微镜（TEM）和扫描电子显微镜（SEM）观察了硅酸溶胶的聚合过程。
Heat resistance, curing reaction, and morphology of the modified phenolic resin system were characterized by TG, DSC, SEM and tem.
借助TG、DSC、SEM和TEM对改性酚醛树脂体系的耐热性能、固化反应和微观形态进行了表征。
The effect of coiling temperature on second-phase of inter-magnetic shielded steel was observed and analyzed by transmission electron microscope (tem) and scanning electron microscope (SEM).
采用透射电镜和扫描电镜对经不同卷曲温度卷曲的热轧内磁屏蔽钢中的第二相进行测试分析。
The results of SEM, TEM, SAED and XRD show that the direction of gas current and the physical or chemical changes of catalyst grain cause the morphology variety of carbon micro-coils.
结果表明，反应气流的流向以及催化剂在反应过程中发生的物理和化学变化是导致碳微线圈形态变化的两个重要原因。
The phase structure, morphology and domain-structure of samples are investigated using XRD, SEM and TEM respectively.
同时利用XRD,SEM和TEM分别对陶瓷的相结构，形貌和畴结构进行了研究。
And several examples on major observation techniques SEM, TEM and HREM of nano-composites were given and analyzed respectively.
并对于分析纳米复合材料的主要观测手段sem,TEM和HREM分别举例进行分析。
The substructure and the fracture process of mullite ceramics were studied by TEM and SEM.
用透射电镜和扫描电镜研究了莫来石陶瓷的亚结构特征和断裂过程。
Mechanical properties testing, SEM and TEM was used to study the effects of cold rolled reduction and aging temperature on the cohesion of the weak interface of DISC.
通过力学性能测试、扫描电镜及透射电镜观察，研究了冷轧压下量及时效温度对内生复合钢板弱界面结合强度的影响。
The effect of garlic on three kinds of pathogenic bacteria (S. aureus, S. flexneri and E. coli)was observed with SEM and TEM.
用扫描电镜和透射电镜，观察了大蒜对三种细菌作用的形态学改变。
From observation of light microscope, SEM and TEM revealed the predominant bacteria of various groups, and element composition of granular sludge was analysed by EDXA.
光学、扫描电子显微镜和透射电子显微镜观察揭示出各生理群的优势菌，并用能谱仪对颗粒污泥的元素组成进行了分析。
The preparation of nano-iron and coated nanocomposite magnetic powder by sonochemistry and the mechanism of coating were systematically studied by means of SEM, tem, ir, XRD and EDS.
采用SEM、TEM、XRD、IR、EDS等分析方法对超声化学制备纳米铁颗粒以及制备包覆型纳米复合磁粉和超声化学包覆机理进行了研究。
The microstructure of zirconia coating deposited by plasma spraying technique was studied by means of FESEM, SEM, TEM and XRD.
利用透射电镜(TEM)、扫描电镜(sem)和X射线衍射仪(XRD)等分析技术，表征了等离子喷涂氧化锆涂层的显微结构。
SEM and TEM examination showed that the graphite in low carbon ductile iron formed nucleus and grew up based on the sulfide and oxide of manganese and calcium.
结果表明：低碳球墨铸铁中的石墨是以锰、钙等的硫化物与氧化物作为基底形核并长大形成的。
Morphological structures of these blends were investigated by TEM and SEM.
用电子显微镜(TEM、SEM)考察了共混体系的形态结构。
Microphase separated structure of blends has been determined by means of VES. DSC, SEM and TEM. Blood compatibility of the blends was evaluated by column beads method.
采用动态力学谱（VES）、示差扫描量热（DSC）、透射电镜（TEM）和扫描电镜（SEM）等测定共混物的微观结构，采用微球柱法评价共混物的血液相容性。
The effect of heat treatment on electrical conductivity of Cu based multi-component alloy was studied by metallographic microscope, TEM, SEM/EDS, XRD and conductance instrument.
借助金相显微镜、TEM、SEM/EDS、XRD及电导仪研究了热处理对铜基多元合金导电性能的影响。
The effects of plastic deformation prior to artificial aging on the microstructure and tensile properties of 2197 Al-Li alloy were investigated through tensile test, SEM and TEM.
通过力学性能测试，扫描电镜、透射电镜观察等手段，研究了固溶淬火后不同程度预变形对2197铝锂合金力学性能及显微组织的影响。
The average particle size and the shape of sample were characterized by XRD, TEM and SEM.
采用XRD、TEM、SEM等测试手段对样品的物相粒径形貌进行了表征。
The structure of the carbon nanotubes was represented with SEM and TEM.
利用SEM和TEM对纳米碳管的结构进行了表征。
The products obtained at different conditions were characterized by means of TEM, SEM, XRD, EDS and the thermal stability of the products was tested.
用TEM、SEM、XRD和EDS等对不同工艺条件下获得的产物进行了表征，对其热稳定性进行了测试。
The microstructures transformation laws and fractures mechanisms of low carbon silicon-manganese TRIP steels in simple tension state were researched by using TEM and SEM.
采用TEM和SEM研究了低碳-硅-锰系TRIP钢在单向拉伸状态下的组织转变规律和断裂机制。
The substructure morphology and characteristics of the treated region was examined by SEM, TEM and XRD technique.
利用扫描电镜（SEM）、透射电镜（TEM）和X射线衍射（XRD）等技术分析研究了表面层的微观结构特征。
XRD, SEM, TEM and the nitrogen adsorption tests are used to characterize the composite nano-water-purifying material.
利用XRD、SEM、TEM及氮吸附等多种测试手段对所制得的复合纳米净水材料进行表征。
The powders after and before being broken were observed directly by TEM and SEM.
用TEM和SEM对剪切破碎前后的粉末进行了直接观察。
The powders after and before being broken were observed directly by TEM and SEM.
用TEM和SEM对剪切破碎前后的粉末进行了直接观察。
应用推荐