By using access control matrix, we can achieve the real time and dynamic control of task, which ensures the system security.
通过引入访问控制矩阵，实现了对任务的实时、动态的控制，从而确保了系统的安全。
The characteristic of the periodic task of control system is analyzed, and a periodic task model is given.
分析了控制系统中的周期性任务特性，给出了控制系统中周期性任务模型。
According to the feature of task of control system, a new method for scheduling real-time tasks is presented.
针对控制系统中任务的特点，提出了一种实时任务调度方法。
First of all, the technological process and characteristics of industry boiler is analyzed. The task of boiler regulator is expounded. And then the system scheme of control is presented.
首先分析了工业锅炉的工艺流程和特点、阐述了调节系统的任务，提出了整体控制方案。
The specific assignment of the task is to provide control system for the equipment about reactive power compensation, to ensure the system run steadily and reliably.
本课题的具体任务是为无功补偿装置提供控制系统，以保障系统稳定、可靠的运行。
The key element of the control task for a continuous system is one of providing the materials needed to complete the products involved.
对连续系统进行控制管理的关键是提供完成有关产品所需要的材料。
The task of gas boiler combustion control system is energy-saving, atmosphere improvement in boiler chamber and reducing pollution.
天然气锅炉燃烧控制系统的任务是节约能源、改善炉内气氛、减少环境污染。
The coordination of multiple mobile robots, decision making and task assignment are upper level control issues of the robot system.
多移动机器人的协调规划、决策与任务分配问题属于机器人系统上层控制问题。
The task of course control is completed by realization and the design of control system.
过程控制的任务是由控制系统的设计和实现来完成的。
The OTDAS optimally decompose the task of power plant control system through an optimizer agent and a decomposer agent.
OTDAS通过一个优化代理和一个分解代理对火电厂多代理控制系统的任务进行了优化分解。
Therefore, the main task of the dissertation is to develop the control system software of computerized knitting machine based on the control theory and knitting process.
因此，根据针织工艺的编织过程以及相关控制理论，开发全自动电脑横机控制系统是本论文研究的主要任务。
This paper describes the function of RTU in the distributed system as well as its hardware construction and software task, and recommends its application to the control of water turbine generators.
本文主要介绍微型机的单元自动控制装置在分布处理系统中的作用及其硬件结构、软件任务，以及在水电站的水轮发电机组控制中的应用。
Thus, Job Management System can control the site, and make site's task strategy map up scheduling behavior, accordingly increasingly improve the running efficiency for the whole cluster.
这样，作业管理系统可以控制站点，并将站点任务策略映射到调度行为上，极大地改善集群的运行效率。
We used the individual decision task of dynamic system control in the group decision situation and designed a network computer simulation.
研究将个体动态系统控制任务拓展到分布式群体决策中，通过计算机网络模拟群体决策过程。
The fly-by-light system is a key task of aeronautics field, which is important for the study of control system redundancy management.
光传操纵系统是航空领域中重要的研究课题，对光传控制系统的余度技术研究有重要的意义。
The airplane ground environmental control system is the important task of ShenYang Hang Da airplane loading equipment company. It is investigated for the demand of new aeronautic equip.
空气循环制冷式飞机地面环境控制系统是沈阳航达机载设备公司立项的重点课题，是为满足新型航空装备的保障需求而研制的。
After that a control system of the unmanned helicopter in high stability was analyzed with the system principle and control law, with which the design task and its design rule was proposed.
然后对高稳定性无人机飞行控制系统进行了系统原理分析和控制律原理分析，提出了设计任务以及应遵循的主要设计原则。
The result shows that NURBS modeling is the final technical project to complete the task of design and modeling, for it has the best balance in accuracy? Control and system resources impropriate rate.
NURBS建模手段因在精确性、控制性和系统资源占用率的平衡性最优而确定为最终技术方案，以完成设计与建模任务。
This paper describes the design of a real-time multitask monitoring system, and more on the kernel module RTMMON in: task control, resource management, interrupt process and communication.
本文介绍了实时多任务监控系统的设计思想，着重阐述了RTMMON的核心模块：任务控制部、资源控制部、中断控制部及通信控制部的设计。
This paper takes up an automatic control system based on an industrial computer. It realizes real-time monitoring and control task of the rotating furnace.
本文介绍了一种用工业控制机构成的工业控制系统，它实现对系统的温度、电流及炉管转速的实时监测和控制任务。
This paper introduces the methods and steps that can accomplish the joint control task of small guard against theft and alarm system at very low cost.
介绍了以极少的花费完成小型防盗报警系统的联动控制任务的方法和步骤。
The paper USES DSP system board designed by ourselves. Its main task is data process real-time control and expert Fuzzy neural network control scheme.
采用了自行设计的DSP系统板，它主要完成数据处理及实时控制以及专家模糊神经网络的控制方案。
It is concluded from the paper that, the humidity control technique used by the thermal control system is successful, and ensure the full success of the (satellite's) task.
通过研究可得，热控系统所采取的卫星湿度控制技术是成功的，保证了卫星任务的圆满完成。
The system can realize the centralized and distributed control task successfully.
该控制系统能够很好地完成集中式和分布式相结合的控制任务。
In distributed system, task of control and data acquisition is completed by single-chip microcomputer, and data processing is carried out by PC.
在分布式微机控制及数据采集系统中，控制与数据采集由单片机实现，复杂数据的处理越来越多地由PC机完成。
Since the real time task sets in control system consist of hard real time periodic tasks and soft real time period tasks, the dual priority algorithm is adopted for scheduling these tasks.
根据控制系统中存在强实时周期任务和软实时周期任务的特点，采用双优先级算法进行任务调度。
In order to carry out dynamic task scheduling effectively, the method of name and orientation is provided for tasks of distributed measurement and control system.
为了有效地实施动态任务调度，需要对分布式测控系统中的每一个任务进行命名与定位。
CAM system based on industry computer and multi-task motion controller adopts the electrical gear to accomplish synchronous motion control of the winding machine.
基于工控机和多任务运动控制器的缠绕机CAM系统采用电子齿轮方式实现缠绕机同步运动控制。
CAM system based on industry computer and multi-task motion controller adopts the electrical gear to accomplish synchronous motion control of the winding machine.
基于工控机和多任务运动控制器的缠绕机CAM系统采用电子齿轮方式实现缠绕机同步运动控制。
应用推荐