This paper introduces the calibration system and static and dynamic calibration method of an engine intake manifold pressure sensor.
介绍了发动机进气歧管压力传感器的标定系统和传感器静、动态标定方法。
The principle, systematic structure of the storage and measurement system of shock-wave pressure and the calibration and application measurement of the system are introduced.
介绍了冲击波压力存储测试系统的原理、体系结构,对研制的测试系统进行了标定、应用试验。
This paper presents one new method of nonlinear calibration for temperature measurement sensors of power plant, which is based on CMAC neural network and data collecting and monitoring system.
本文充分利用CMAC神经网络的非线性函数逼近功能,并结合电站数据采集和监测系统,提出一种校正电站测温传感器非线性输出特性的新方法。
In this paper, we introduce the camera model calibration algorithms and adopt a method of moving a single camera to calibrate parameters of traffic monitoring system.
本文研究了摄像机模型的标定方法,采用了通过一台摄像机平行移动来模拟两个摄像机的标定方法,达到标定系统参数的目的。
The system can perform automatic synthesis calibration of much more types of ATE and Special Purpose Test Equipment. Servicing efficiency and quality of measurement support is improved.
该系统在现场条件下可对多种不同型号的ATE、专用测试设备进行自动化综合计量校准,提高了计量保障效率和质量。
The actual accuracy is due to the calibration accuracy. Calibration methods affect the convenience and dependability of an optical measurement system directly.
系统的标定精度直接决定了系统的实际使用精度,而标定方法又直接影响着视觉测量系统的使用方便性和可靠性。
It is composed of a calibration system, a gas flowmeter and pumping system.
它由校准系统、恒压式气体微流量计和抽气系统组成。
Every kind of measurement system needs calibration.
任何一种结构光测量系统均需要标定。
Swing shaft test bench is used to test alignment, calibration and accuracy of system under simulating swing condition in laboratory.
摇晃轴试验台是在实验室模拟摇晃条件下,对被试系统进行对准、标校及精度试验的一种装置。
A software design of the postural gyros calibration system is presented, and the design constitution, functions and application method of the calibration software are described.
介绍了姿态陀螺仪校准系统校准软件设计,叙述了校准软件的设计、构成、功能及具体实施方法。
The actual accuracy of an optical measurement system is due to the calibration accuracy. The calibration methods should possess the property of convenience and dependability.
线结构光的标定精度直接决定了测量系统的实际测量精度,而标定方法又直接影响着测量系统使用的方便性和可靠性。
This paper introduces a design of spaceborne calibration system for earth observation rotating scan radiometer.
文中介绍了一种对地观测旋转扫描辐射计星上定标系统的设计。
But compensated precision isn't changing, when there is transferring system erros the measuring precision of the traditional calibration method is apparently descension.
当在传感测量中加入平移系统误差时,该方法的补偿精度不变,而传统标定方法的测量精度明显下降。
The accuracy grade of novel HVEM must be defined by integrated error calibration system.
新型高压电能表必须采用整体误差校验系统来定义准确度等级。
Calibration of IC test system is critical to the precision and reliability of IC test results.
集成电路测试系统的校准关系到集成电路测试结果的准确性和可靠性。
Calibration of pressure system is the precondition of formation tester log.
压力系统的刻度是地层测试器测井的前提。
We check the calibration and reactor system of measurement.
我们检查并校准了反应釜计量系统。
According to the special structure of our robot vision system, the linear calibration is employed with a lot of simplifications.
根据视觉机器人系统结构特殊的特点,作了大量的简化,采用线性标定方法。
Since the system of measurement is at experimental stage, the precision in system parameters calibration still remains to be improved.
测量系统仍处于试验阶段,在系统结构标定方面的精度还有待提高。
This paper described the consist of the resistance strain measure system and the approach of static calibration in detail.
详细介绍了电阻式应变测量系统的组成、系统静态标定的方法与步骤;
The working principle and hardware configuration of the system, calibration of SIWAREX u, and PLC software were introduced.
描述了系统工作原理,给出了系统的硬件配置、SIWAREX U校正以及PLC软件设计。
Then, it introduced the building of the test system, calibration software of the automatic tuner and the testing software of the system.
其中较为详细的介绍了测试系统的搭建,自动调配器的校准软件,以及系统的测试软件。
Correcting the distorted image of camera in calibration process of fringe projection measurement system that can effectively improve the calibration accuracy of system.
在条纹投射测量系统的标定过程中对摄像机畸变图像进行修正,能有效地提高系统的标定精度。
The system design, the method of calibration with reference film and the detection processing according to the detection project of engine rod's surface disfigurement are discussed.
以汽车发动机连杆破口缺陷检测为例,讨论了所研制的检测设备的系统设计、参照物标定法和测量流程。
It expatiates the calibration principle of image detecting system and explains the method of realizing the calibration system by real example.
详细阐述了图象检测系统的标定原理,举例说明了标定系统的实现方法。
The calibration principle and method of the near region field strength meter are described, especially its auto calibration and test system and the study of software.
介绍了近区场强仪的核准原理和方法,着重介绍了近区场强议的自动校准测试系统和软件的研究。
This paper introduces the calibration method of the system and the principle of the calibration equipment developed by ourselves.
本文介绍了自行研制的这种设备的校准装置原理和校准方法。
This paper introduces the calibration method of the system and the principle of the calibration equipment developed by ourselves.
本文介绍了自行研制的这种设备的校准装置原理和校准方法。
应用推荐