The results show that this model well conforms to the actual operation and can be used for simulation system construction, system control strategy study and dynamic performance analysis of the system.
结果证明此模型能够与实际运行情况很好地吻合，可用于仿真系统的构建、系统控制策略的研究及系统动态性能的分析等。
This paper presents a computer simulation model of the cardiovascular circulation system, which describes the blood flow dynamic law in the cardiovascular system by the state equation.
建立一种心血管循环系统的计算机仿真模型，即描述心血管循环系统内血流动力学变量变化规律的状态方程。
Based on mechanism analysis, a dynamic model of FCCU reactor-regenerator system is given. It can be used for simple process characteristic analysis and for control system simulation.
针对催化裂化装置反应再生系统，进行了动态机理建模研究，给出了可以用于过程特性分析和控制系统仿真研究的动态机理模型。
Finally, the feasibility of model predictive control can forecast reasonable inventory level and control dynamic and uncertainty supply chain system are shown by the simulation results.
最后，仿真结果表明，模型预测控制技术在预测合理库存水平以及控制动态、不确定的供应链系统是可行的。
A static relations curve of the main movement parameter is given by means of computer simulation and by an established mathematical model, and the system dynamic characteristic analyzed.
利用所建立的数学模型，采用计算机模拟的方法，得到了主要参数间的静态关系曲线，并分析了系统动态特性。
The dynamic simulation model based on the multi-rigid-body theory of the passenger restraint system for side impact of a car is created, and its validity is verified by tests.
针对某轿车建立了基于多刚体理论的侧面碰撞乘员约束系统动态仿真模型，并依据试验结果进行了模型的有效性验证。
Transportation simulation system model considers various kinds of construction border, which has dynamic characteristic in the construction course, has a advantage of facilitating modeling.
交通运输仿真系统模型则考虑了施工过程中各种施工边界条件动态变化的特性，并具有方便建模的优点。
Base on this, the paper more improve spreading model of the existing post-earthquake fire and have developed the spreading dynamic simulation system of post-earthquake fire base on GIS.
在此基础上进一步改进现有的地震火灾蔓延模型，开发出基于GIS平台的地震次生火灾动态蔓延模拟系统。
A system simulation study was done for full digital welding inverter, and a method of connecting dynamic arc load model to the system with controlled source was presented.
从整体上对数字控制逆变焊机系统进行了仿真研究，提出用受控源的方法实现了动态电弧负载模型与系统的连接。
This paper studies the dynamic mathematical model of the dual fuel servo system in gas turbines by the methods of the theoretical modelling and digital simulation.
采用理论建模和数字仿真方法，对燃气轮机双燃料伺服系统的动态数学模型进行研究。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
The primary structure and functions of the Heilongjiang dispatcher training simulation system are described with emphasis on its electric system model including static model and dynamic tide model.
介绍了黑龙江省调度员培训模拟系统的主要组成部分，着重阐述了电力系统模型。包括静态模型及动态潮流模型。
Through analyzing dynamic characteristics of circuit system, mathematical model of throttling speed control circuit was established, and simulation model of circuit was built up.
通过对回路系统动特性分析，首先建立了节流调速回路的数学模型，在该模型的基础上建立了回路仿真模型。
This paper provides an arithmetic method based on rigorous model for dynamic simulation and solving methods for the former system.
对前者建立了基于机理模型的动态模拟模型算法，给出了具体的求解方法。
A simulation model for driving performance of armored vehicles under non steady running conditions has been developed, based on dynamic processes of engine and transmission system.
基于发动机和传动系统的动态过程，本文开发了一个装甲车辆非稳定工况的驱动性能仿真模型。
Matrix model for discrete event dynamic simulation (DEDS) is a hybrid system with logical and algebraic components.
离散事件动态系统（DEDS）矩阵模型是一种逻辑运算与代数运算的混合系统。
During the simulation of the dynamic properties of regenerative high temperature air combustion system in coupled case, an industrial heating furnace model is selected as the physics model.
在对耦合工况下蓄热式燃烧系统的动力特性分析中，以一个工业用蓄热式加热炉为参考计算模型。
Combining the headbox model with the GEMS simulation system allows dynamic simulation and evaluation of headbox control systems.
利用这个模型及模拟系统能对各种流浆箱自动调节系统进行动态模拟和质量评估。
The modeling principle of the proposed active power filter is analyzed. The dynamic diagram of the model is achieved by means of simulation and the convergence process of the system is analyzed.
对此有源滤波器的建模原理进行了分析，通过仿真建立了模型的动态曲线，在此基础上对系统的收敛过程作了分析研究，仿真和实验结果验证了理论分析的正确性。
The simulation results show that this model reflect the turbocharged diesel engine dynamic characteristics well and can be used in the dynamic simulation of total vehicle system.
仿真的结果表明，这个模型较好地反映了涡轮增压柴油机动态特性，可以将此模型应用于整车的动态仿真中。
A dynamic simulation model of start-up process including fuel pumped section and the dynamic nozzle valve lever, etc. is established for the torpedo thermal power system with pressure adjustment mode.
文中针对使用燃料压力调节供应方式的热动力系统，建立了包括充填集液腔和喷嘴阀杆运动等启动过程动态仿真模型；
It is critical effect to grip the dynamic characteristic of water-steam system of boiler which establishes the dynamic mathematical model and do research analysis on simulation.
借助于计算机仿真技术，建立锅炉汽水系统的动态数学模型，进行仿真研究分析，对掌握汽水系统的动态特性起着非常重要的作用。
The operation of the simulation model showed that it is completely feasible to study the dynamic behavior of the pneumatic flap gate system of dry docks by using the described model.
通过对仿真模型的运行表明：用所述的仿真模型研究干船坞气控卧倒坞门系统的动态特性是完全可行的。
Finally, the simulation models and dynamic characteristics of wind-gas turbine hybrid power system are discussed based on the model of wind turbine unit, power grid and gas turbine power plants.
最后，根据大型风电机组的机理模型、电网模型以及燃气轮机模型，建立了集成的风气互补发电系统的仿真模型并研究了其动态特性。
The whole ABS models are established for the simulation requirement, including tire-road model, vehicle dynamic model, brake disk model, hydraulic system model and the controller model.
针对ABS仿真计算的需要，对整个防抱系统进行了建模，包括轮胎模型、车辆模型、制动器模型、液压系统模型和控制器模型；
Simulation results show that the presented method can accurately construct the inverse dynamic model of the continuous nonlinear system even without prior knowledge about the controlled plant.
仿真结果表明，在没有被控对象先验知识的情况下，利用该方法能准确地建立连续非线性系统的逆模型。
Simulation results show that the presented method can accurately construct the inverse dynamic model of the continuous nonlinear system even without prior knowledge about the controlled plant.
仿真结果表明，在没有被控对象先验知识的情况下，利用该方法能准确地建立连续非线性系统的逆模型。
应用推荐