Lines and curves Lines are the foundation of any vector graphics drawing system.
直线和曲线-直线是任何向量图形绘制系统的基础。
System parameters, operation modes and process curves can be directly displayed on the controller.
系统参数,运行模式及过程曲线等可在控制器上直接显示。
Based on analyzing the curing characteristics of the resin system and the isothermal viscosity curves, an engineering viscosity model was developed.
根据对树脂固化特性和等温粘度曲线的分析,建立了树脂体系的工程粘度模型。
ZIP load model is used to calculate the PV curves of the power system, and some meaningful conclusions are drawn by comparing its result with which constant power load model is used.
采用了ZIP负荷模型来计算系统的PV曲线,并与采用恒功率负荷模型时的结果进行了比较,得出了一些有实际意义的结论。
The polarization curves of copper physical development (CuPD) system were obtained by transient constant current step method on copper plated platinum electrode.
本文采用镀铜铂电极和暂态恒电流阶跃的方法测得了铜物显(铜物理显影)体系的极化曲线。
A new automatic recognition system of bills is designed on the basis of the principal curves and rough set methods.
设计了一种基于主曲线和粗糙集方法相结合的新颖的票据自动识别系统。
Finally, in allusion to the current detection system simulation, reliability detection, and the detecting result on the welding filed, this paper analyses their data and curves in detail.
论文最后对电流检测系统的模拟调试、可靠性检测以及在焊接过程中的实际检测结果进行了详细的数据与曲线分析。
The system can record and plot the make up torque turn curves automatically, and it also can monitor whole process of casing job and find out the location of the casing with trouble.
该系统实现无人监控、自动记录、绘制紧扣转矩—圈数曲线,可方便、直观地反映下套管作业的全过程及有问题套管所处的位置。
An adaptive zero-phase tracking control algorithm is developed, and with which the servo system is able to track accurately a given non-circular high order special curves.
提出了零相位跟踪控制算法,使控制系统对给定非国特殊曲线具有很高的跟踪精度,从而保证了非圆轴类表面磨削加工精度。
This system can be applied in CAD on any kinds of contour curves of plate cam mechanisms.
该系统能快速、准确的进行各种轮廓曲线的计算机辅助设计。
The main influence factors of the speed and air-fuel ratio and the relation curves of the unit, the structure and PID algorithm of the system are described concretely.
较具体地叙述了机组转速和空燃比的主要影响因素、关系曲线、控制系统构成和PID算法的实现方法。
According to the power system coherency and the swing curves of the disturbed generators, apply the data mining and the principle of the correlation, define the indicator for coherence.
文章在电力系统同调性概念的基础上,通过数字仿真获取发电机的时间响应曲线,定义了基于相关性原理的发电机同调指标。
The characteristic curves of controlled-PMmaglev system with different thickness permanent magnets are mainly studied in this paper.
本文着重分析了不同永磁体厚度可控永磁悬浮系统的特性曲线。
A blasting measuring system which include plane wave producer was set up to measure the strain time curves of the rock bar under blasting loading.
以平面波发生器为加载源的爆炸测试系统,直接得出爆炸作用下岩石的应变历程曲线。
As for the numerical simulation by traditional power system component models and parameters, the obtained dynamic frequency curves evidently diverge from measured ones.
采用常规的电力系统元件模型和参数进行数值仿真所得的频率变化曲线与实测曲线偏差较大。
With the Doppler laser vibration measurement system, the vibration velocity curves of the flip chip and tool tip were obtained during thermo-sonic flip chip bonding.
采用多普勒激光振动测量系统,获得了热超声倒装键合过程中工具末端及芯片的振动速度曲线。
With increasing in stiffness and excitation force, the distance between amplitude-frequency curves of the system enlarges.
随着弹簧刚度和激力的增大,系统幅频响应曲线上下两条曲线的距离逐渐增大。
The diagram of system structure and the simplified program flowchart are given. In addition, the operational curves of both fuzzy control and feedforward feedback control are compared.
最后给出系统结构图和程序流程简图,并将模糊控制运行曲线与前馈-反馈控制运行曲线进行了比较。
Evolution of rock joints into transfixion is described by the time series from strain-stress curves, and the state of joint system in sandstone is chaotic before its ultimate state.
形成岩石全应力应变曲线的时间序列反映了岩石内部节理裂隙趋向贯通的演化进程,砂岩节理裂隙系统在峰前阶段处于不同程度的混沌状态。
Stability of the curves, namely the balance route of stability and static bifurcation behaviour of the system are discussed.
讨论了解曲线即平衡路径的稳定性及系统的静态分叉特征;
At last, the simulating and sampling position and pressure curves of the hydraulic system with the iterative learning PID controller are presented.
最后,给出了采用迭代学习PID控制器时,液压机滑块位移与系统压力的仿真曲线以及实际应用时的采样曲线。
The design of the CAM curves of the zoom system is critical to keep the precise, smooth and balance movement of the optical system.
变焦距光学系统凸轮曲线设计是保证光学系统变焦精确、平滑和驱动力均衡的关键。
The temperature control system can control the heating furnace according to given temperature curves.
温度控制系统及其软件使系统可按给定的加热曲线对加热炉进行控制。
Many simulation curves are given after analyzing those curves we can draw a conclusion that Model algorithm control algorithm can improve the control property of system greatly.
由各种情况的闭环输出曲线和控制量变化曲线分析比较可知,模型算法控制应用与半主动控制系统有着良好的控制性能。
This article takes the system frequency response curves in vented box system as the target, to observe the changes by the effects from the deviation in ts parameters of drivers.
以开口箱的系统频率响应曲线为分析目标,要观察ts参数的偏差所产生的变化。
The research of static voltage stability in power system is based on the analyzing the Q-U characteristic curves of load and provision ends with comparing them in this thesis.
本文对于静态电压稳定问题的研究是基于Q -U曲线分析的方法进行的,利用负荷侧与供电侧q - U曲线斜率的比较来分析系统的静态电压稳定性。
The system can measure characteristic curves of most flash lamps as long as an AD device with sufficient speed is employed.
按照此系统的设计方法,只要采用模数转换速度足够高的AD器件,就可以实现对大多数闪光灯特性曲线的获取。
The system can measure characteristic curves of most flash lamps as long as an AD device with sufficient speed is employed.
按照此系统的设计方法,只要采用模数转换速度足够高的AD器件,就可以实现对大多数闪光灯特性曲线的获取。
应用推荐