We make full use of CAE mold flow analysis techniques, simulation and optimization of mold runner system design, improve part quality and reduce the number of test mode and unnecessary waste.
我们充分利用CAE模流分析技术，模拟和优化模具浇道系统设计，提高零件的质量和减少试模次数及不必要的浪费。
So that the existing CAD/CAE system for casting technique were integrated within concurrent engineering, and the remarkable results were achieved through actual applications.
因此把已开发的铸造CAD／CAE系统成功地集成在并行工程中，并进行了实际应用，取得了明显的效果。
Based on elastic FEM theory and heat transfer theory, the author USES I-DEAS software as a CAE tool, builds the finite element analysis method and techniques of the principle shaft system on work.
本文采用I -DEAS软件作为计算机辅助分析的工具，基于弹塑性有限元理论和传热学理论，建立了工作状态下主轴系统的有限元分析方法及技术处理方法。
Combined with development of instrument modeling design system, the application of CAE in instrument product modeling was studied.
结合仪表造型设计系统的开发工作，对CAE在仪表产品造型设计中的应用技术进行了研究。
Finally, the CAE models of shield box and single module are established with developed system, and modal analysis, transient analysis and random vibration (PSD) analysis are executed.
最后，利用已开发的系统建立了屏蔽盒类机箱整机和单个模块的CAE模型，分别进行了模态分析、瞬态分析和随机振动分析。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and optimize processing design.
在CAE系统中，对铸件进行流场和温度场的模拟，以便校核和优化工艺设计。
The CAE technology and PATRAN finite element software were used in three-dimension simulation and analysis for three axis turntable frame system.
三轴转台框架系统的三维模拟与分析，采用CAE技术，使用PATRAN有限元软件。
The method for realization of the remote CAE application system for injection moulds was studied.
研究了注射模CAE远程应用系统的实现方法。
The structural strength and flexural rigidity of the fuselage main frame are computed and verified by CAE system software and the results are analyzed.
应用CAE系统软件计算承力密封框的刚度和强度，并分析了计算结果。
HAJIF-II is a program system developed by Chinese Aeronautical Establishment(CAE).
是中国航空研究院领导研制的航空结构动力分析系统。
In this CAE system, the error exists at every stages.
在此CAE系统中，误差存在于每一阶段。
CAE for plastic injection molding software is usually divided into three subsystems: pre-processing system, numeric analysis system of injection molding process, and post-processing system.
塑料注射模cae软件一般划分为三个子系统：前置处理系统、注射成型过程数值分析系统和后置处理系统。
This paper first proposes the multiple interchanged solution method suiting the need of CAE by studying satisfaction rule model of occupant restraint system reverse problem.
通过对乘员约束系统逆问题满意准则模型的研究，首次提出一套适合CAE需要的多层交互求解策略。
The functions of system and some related key technologies, such as distributed CAE data management, model base system, collaborative assistant tools were discussed in detail.
详细介绍了该系统的功能和关键技术的实现，包括分布式CAE数据管理、基于文件的模型库系统、协同辅助工具等技术。
The heat exchanger CAD (HECAD) system is a CAD/CAE software developed for heavy-duty process heat exchanger.
热力系统换热设备CAD系统是针对重大过程换热设备而开发的CAD/CAE软件。
CAE analysis field, 2 persons, analyzing stiffness, strength and nonlinear collision of the Complete Auto, analyzing and researching on system kinematics and aerodynamics.
CAE分析方向2人，整车刚度、强度分析，整车碰撞非线性分析；系统运动学分析，空气动力学分析研究。
The CAE system of automotive axle is designed by this interface.
利用这个接口，设计并实现了一个车桥CAE系统。
The system provides castings simulation services through network and improves the application of the CAE technology in the foundries.
系统通过网络提供铸件试算模拟服务，推动CAE技术在铸造企业中的应用。
Our company has a good CAD design, CAE analyse, finite element analysis and perfect test system.
公司具备良好的CAD辅助设计、CAE分析能力、有限元分析能力及完善的产品试验测试系统 。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and opti...
在CAE系统中，对铸件进行流场和温度场的模拟，以便校核和优化工艺设计。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and optimize process…
在CAE系统中，对铸件进行流场和温度场的模拟，以便校核和优化工艺设计。
During the mold design, gating system and cooling system designed and optimized with CAE technology.
在模具设计过程中充分CAE技术来优化设计浇注系统和冷却系统。
The results show the designed risers are reasonable. This system realized the automatic building of risers. It can provide a proximal optimum process for CAE valuation and even practical production.
系统实现了冒口工艺的自动设计，为模拟验证乃至实际生产提供较佳的推荐方案。
This aeronautical structural analysis system for static analysis(H AJIF-I) is the first large software system developed by the Chinese Aeronautical Establishment(CAE).
用于静力分析的航空结构分析系统是航空工业首次研制的一个大型程序系统。
It is a key to introduce sensitivity analysis method into injection mould CAE for cooling system automatic and optimum design. It also becomes an important content in cooling system design.
将灵敏度分析方法引入注塑模温度场CAE中，是如何实现冷却系统自动优化设计的核心，也是冷却系统设计的一个重要方向。
After a brief introduction to the structure of injection moulds, the research situation of CAE-based optimization plan for the feed system and cooling system of injection moulds was discussed.
在简单介绍注射模结构的基础上，对基于CAE的注射模浇注系统和冷却系统优化研究概况进行了论述。
Internet based exam system is a popular CAE soft, which could take advantage of education resources reasonably and improve the teaching efficiency.
网络考试系统是一种常用的计算机教育应用系统，它可以合理利用考试资源、提高教学效率。
Internet based exam system is a popular CAE soft, which could take advantage of education resources reasonably and improve the teaching efficiency.
网络考试系统是一种常用的计算机教育应用系统，它可以合理利用考试资源、提高教学效率。
应用推荐