Over 80% of PVC industry in China USES suspension polymerization system.
中国PVC工业80%以上采用悬浮聚合体系。
Suspension polymerization is the main way in industrial production of PVC.
悬浮法是工业生产聚氯乙烯的最主要的方法。
Methods:The PMMA/MMT nanocompounds were synthesized by suspension polymerization.
方法:利用悬浮聚合法制备PMMA/MMT复合物;
The stabilization mechanism of inverse suspension polymerization was also discussed.
探讨了该反相悬浮分散体系的稳定机理。
A high water absorption polyacrylic acid resin was obtained using inverse suspension polymerization.
采用反相悬浮聚合法合成了聚丙烯酸高吸水性树脂。
The dissolution of composites by mixing in toluene is compared with that by suspension polymerization.
同时比较共混法与悬浮聚合法制得的复合材料在甲苯中的溶解性。
Inverse suspension polymerization was adopted to synthesize sodium polyacrylate super hydroscopicity resin.
采用反相悬浮聚合法合成聚丙烯酸钠高吸水性树脂。
The granular thermo-plastic phenolic resin produced by suspension polymerization could replace the imports.
悬浮法生产的粒状热塑性酚醛树脂可以取代进口树脂。
Carboxylate modified magnetic microspheres were prepared by using modified suspension polymerization method.
用改进的悬浮聚合法制备了表面含有羧基功能团的聚苯乙烯磁性微球。
The effect of HPMC-E50 and HPMC-F50 on PVC resins in VCM suspension polymerization was analyzed based on a lot of experiments.
通过大量试验分析了HPMC-E50和HPMC-F50在氯乙烯悬浮聚合中对PVC树脂的影响,从而确定了复合分散体系的质量分数以及分散剂的配比。
A high oil-absorption resin of polyacrylic acid system with moderate crosslinking was synthesized by suspension polymerization.
采用悬浮聚合法合成甲基丙烯酸酯类高吸油树脂,研究了交联剂、引发剂用量对树脂性能的影响。
For inverse suspension polymerization, water soluble monomer is dispersed in oil continuous phase and initiated in aqueous phase.
反相悬浮聚合是将水溶性单体分散在油溶性介质中,水溶性引发剂溶解于水相中进行聚合的方法。
The acrylate oil absorbing resin were synthesised by means of suspension polymerization and using divinylbenzene as crosslinking agent.
以丙烯酸酯为单体,二乙烯基苯为交联剂,采用悬浮聚合法合成低交联度的聚丙烯酸酯类吸油树脂。
Granular high oil-absorbing resin was prepared by free radical suspension polymerization process using 4-tert-butyl styrene as monomer.
以4 -叔丁基苯乙烯为单体,采用自由基悬浮聚合法合成了颗粒状高吸油树脂。
The model provides the basis for dynamic behavior analysis, process predictive control and optimization of VCM suspension polymerization.
此模型为氯乙烯悬浮聚合过程的动态特性分析、过程预测控制和优化提供了基础条件。
The consumption of Hydroxyapatite (HAP) dispersants for suspension polymerization is the greatest in the world among inorganic dispersants.
羟基磷灰石(HAP)悬浮聚合分散剂是世界上使用量最大的一种无机分散剂。
This paper summarizes the new study progress of suspension polymerization of EPS, analyzes the main influence factor during polymerization.
综述了可发性聚苯乙烯悬浮聚合的最新研究进展,分析了聚合反应过程中的主要影响因素。
Useing unsaturated urethane, 2-ethylhexyl acrylate, crosslinking agent, high oil-absorbent resin was prepared by suspension polymerization.
用不饱和氨基甲酸酯、丙烯酸异辛酯和交联剂,以悬浮聚合的方法制备高吸油性树脂。
The spherical lignin beads were prepared by applying reverse-phase suspension polymerization technique with sulphate lignin as raw material.
以硫酸盐木质素为原料,利用反相悬浮技术制备出球形木质素吸附剂。
The factors effecting on the reaction rate of phenol-formaldehyde condensation by suspension polymerization have been studied systematically.
研究了制备悬浮法酚醛树脂的各种因素对酚醛缩聚反应速率的影响。
The high oil-absorbing resin made of crosslinked copolymer of wood fibre and cetyl methacrylate was prepared by suspension polymerization method.
采用悬浮聚合法合成了木浆纤维素交联聚合复合高吸油性材料,测定了所制备的复合高吸油性材料吸油性能指标。
The high oil-absorption resin of copolymer of vinyl acetate and (2-ethylhexyl) acrylate was prepared by suspension polymerization with self-crosslinking.
以丙烯酸 2 -乙基己酯与醋酸乙烯酯为单体 ,采用悬浮聚合法 ,以单体自交联制得高吸油性树脂。
The results showed reactive PS containing oxazoline ring could be synthesized by the suspension polymerization and bulk polymerization mentioned in this paper.
结果表明,用本文所述自由基悬浮聚合或本体聚合方法都能合成含恶唑啉环的活性聚苯乙烯。
The suspension polymerization of DMAHPMA has been carried out easily and successfully in 10% NaCl aqueous solution without any addition of suspension stabilizers.
DMAHPMA在10%的盐水溶液中,不加悬浮稳定剂,即能成功地进行悬浮聚合。
In this paper, a super absorbent resin that used acrylic acid as raw material and was synthetized by means of inverse-phase suspension polymerization was studied.
本文以丙烯酸为原料,采用反相悬浮聚合法合成高吸水树脂。
Three high oil-absorption resins were synthesized by suspension polymerization and the factors affected the properties of oil-absorption resins were investigated.
本文采用悬浮聚合法制备三种高吸油性树脂,并考察了高吸油性树脂吸油性能的影响因素。
The particle diameter and surface characteristics of toner particles prepared by suspension polymerization in the presence of carbon black particles were studied.
研究了含有微细炭黑粒子混和单体悬浮聚合产物的粒径及形貌特性。
The effects of impurities such as phenylethyne, polymer and methyl styrene on particle diameter of polystyrene manufactured by suspension polymerization were analyzed .
研究了苯乙烯中苯乙炔、聚合物和甲基苯乙烯三种杂质对悬浮法聚苯乙烯粒径的影响。
The techneques of scale prevention and cleaning of polymerization reactors, and their application to the suspension polymerization reactors were reviewed with 22 references.
综述了聚合反应器的防粘釜和清釜技术,并简介在悬浮聚合反应器中的应用。
The techneques of scale prevention and cleaning of polymerization reactors, and their application to the suspension polymerization reactors were reviewed with 22 references.
综述了聚合反应器的防粘釜和清釜技术,并简介在悬浮聚合反应器中的应用。
应用推荐