In accord with special requirements in engineering exploration, both the theory and the application of the surface wave method require further study and investigation.
根据工程勘察中的特殊要求，面波方法的理论和应用都要做进一步深入的研究和探讨。
Based on the collapsible loess subgrade in China northern region, this paper used dynamic sounding method and surface wave method to detect the impact compaction behavior.
基于中国北方某湿陷性黄土路基工程，利用动力触探和面波法等方法对冲击压实工后的黄土路基进行对比检测。
According to the difference of the medium, along which the surface sound wave propagates, the detection method is classified, and the general principle, progress, and its application are introduced.
根据表面声波传播介质的不同，对检测方法进行了分类，并从检测原理，研究进展及应用等方面对各检测方法进行了详细介绍。
The paper introduce the theory of surface acoustic wave sensor, the digital signal treatment, the method of soft design in the passive and wireless tire pressure monitoring system in detail.
文章详细介绍了无源无线轮胎压力监测系统中的声表面波传感器工作原理、回波信号组成、数字信号处理和软件开发方法；
The reflection phase property and surface wave dispersion are analyzed using finite element method.
用有限元方法分析了其反射相位特性及表面波传输特性。
The Rayleigh surface wave prospecting is a new method of the engineering geophysical exploration.
瑞雷面波勘探法是一种新型的工程地球物理勘探方法。
The wave propagation and power flow characteristics of a shell-type pipe with circumferential surface crack are investigated and the method for crack detection is proposed.
研究在外力激励下含有环向表面裂纹损伤的壳式管道的波传播与功率流特性，并给出裂纹识别方法。
Penetration performance in surface layer of concrete target was analyzed by stress wave damage theory, calculating method base on "simplified equivalent resistance line" was presented.
从应力波表层损伤理论分析了混凝土表层“开坑区”的侵彻特性，提出“简化等效阻力线”的计算方法；
The free surface flow of a solitary wave overtopping an erect breakwater was simulated using turbulent model and the VOF method.
应用湍流数学模型和流体体积法模拟孤立波翻越防波堤的流动和自由表面变化。
The method of detection ability enhancement of surface wave signals for weak events is studied. Moreover, this method is applied to a set of events at regional stations.
本论文对如何提高小震级事件面波信号检测识别能力的方法及该方法在面波信号检测中的应用进行了分析与研究。
Based on Huygens principle of wave propagation, a numerical simulation method on CFD software unstructured mesh was founded so as to calculate burning surface regression directly.
根据惠更斯波传播原理，构建了一种在通用CFD软件的非结构网格系统上直接计算燃面推进的数值方法。
Multiple printed circuitboard for electronic components esp. acoustic surface wave elements, and method for constructing bumps, soldering frames, spaces on said multiple printed circuitboard.
用于电子元件特别是声学表面波元件的多路印刷线路板以及在多路印刷板上构造针脚焊点，焊接架，隔片等的方法。
Therefore, the wave equation pre-stack depth migration, a method starting directly from the rolling surface, is discussed.
为此，探讨了直接从起伏地表开始的波动方程叠前深度偏移方法。
The received surface displacements, in response to an applied dynamic excitation, are used to determine the position and geometry of embedded cracks based on a reverse elastic wave method.
基于弹性波的反问题方法，对材料施加动态激励，我们可以从接收的响应表面位移求出内嵌裂纹的位置和形状。
A new method was presented for millimeter wave stealth which can automatic acclimatize itself to its environment via getting information from surroundings and its surface.
提出了一种通过实时获取环境与装备表面温度实现自适应调节的毫米波隐身的方法及其系统实现。
The analysis method proposed can take into consideration of the effects of water surface gravity wave, water compressibility, and radiation damping at up-stream of reservoir.
所建议的分析方法能够考虑表面重力波的影响、水体可压缩性、水库上游辐射阻尼等各种因素作用。
We match the boundary conditions to take care of the interface between the metal and the dielectric in the FDFD method. Thus the SP wave distribution on the metal surface can be accurately simulated.
在频域有限差分法使用上，我们用边界条件去处理金属和介质之间的边界，故能精确模拟出金属表面电浆波在近场的分布情形。
A phase interference method, for measurement of the relative change of surface acoustic wave velocities, is presented.
本文提出了一种相位干涉法。用来测量表面声波速度的相对变化。
As mixture for droplets is important and needs to be improved in lab-on-a-chip, a fast mixing method for digital droplets in micro-channel driven by surface acoustic wave is proposed.
微流体混合是微流控芯片急需完善的重要操作单元，提出了在声表面波驱动下实现微通道内数字微流体快速混合方法。
The paper expounds the method of design about wave spring curved surface, the processing NC program and its technological processing course.
阐述了波形弹簧成形模曲面的确定及其数控加工程序的编制方法、加工工艺过程。
To suppress ionospheric clutter in the echo signal of high frequency surface wave radar (HFSWR), a method to suppress clutter based on time-frequency analysis and eigenvalue decomposition is proposed.
针对高频地波雷达回波信号中的电离层杂波，提出了利用时频分析与特征值分解抑制杂波的方法。
The mathematical model of the Lamb wave sensor was established on the basis of the partial wave theory and the surface effective permittivity method.
以部分波理论和表面有效介电常数方法为基础，建立了兰姆波传感器的数学模型。
The wave surface function can be obtained with this method to calculate the wave aberration of any point on the wave surface.
用这种方法可以得出波面函数，从而计算出波面上任一点的波差值。
The space-wave method, suitable for extended surface targets, is a preferable method for permittivity measurement of ground materials at microwave frequencies.
空间波法适合于测量大面积目标的介电常数，所以是测量地物微波介电特性的一种较好的方法。
This method is useful to surface wave absorbing material study.
该测量方法特别适用于表面波吸波材料的研究。
The paper studies the method of simulating the infrared images of sea surface in the wave band of 3-5 micron.
该文重点研究了3-5微米波段海面红外热像的理论模拟方法。
In this paper, the method for drawing grid-based terrain, contour, and velocity field and wave surface are studied.
本文研究了计算网格地形、波高等值线、速度场和波面的可视化。
Acoustic wave ash clean-out is a method of using energy of sound field to clean out ash on the surface of materials.
声波清灰是一种利用声场能量的作用，清除物料表面积灰的方法。
Use curved surface fitting method, to analyze the rule of main deck's deformation in oblique wave; present method of sub value and combination to analyze torsion deformation.
利用曲面拟合的方法，分析斜浪中甲板的变形规律，提出了扭转变形分析的分量组合方法。
A method of retarded Green function equation of motion is applied to inveti gate the surface spin wave spectrum of Heisenberg ferromagnet.
用格林函数运动方程方法研究了海森堡铁磁体表面自旋波谱。
应用推荐