An experimental researching method-surface temperature method for heat transfer on ceramic coat in low-heat-rejection engine was developed.
本文探索了一种低散热发动机陶瓷表面传热的实验研究方法—表面温度法。
In this paper an experimental method for investigation on instantaneous heat transfer in combustion chamber of diesel engines-the surface temperature method is presented.
本文介绍了一种柴油机燃烧室瞬态传热的实验研究方法——表面温度法。
The distribution of solar radiation on dam surface can be computed by the method and accurate thermal boundary conditions of the dam temperature field are obtained.
该方法能够准确计算拱坝坝面太阳辐射的不均匀分布，为温度场计算提供准确的边界条件。
Single pass laser surface of the specimens using powder feeding method were obtained by varying the powder feeding rate and the preheating temperature of the substrate.
通过改变送粉激光熔覆过程中的扫描速度、送粉速率、基体预热温度等工艺参数，获得了单道激光熔覆层。
The paper put out an analytical method to compute the deposit thickness and the instantaneous temperature of the deposit surface, and obtained the computing results.
文章提出了一种定量计算燃烧室壁面积炭层厚度和积炭表面时态温度的方法，并依据测量数据给出了研究结果。
The paper describes the measurement method for model surface temperature and model surface illumination strength in wind tunnel optical pressure measurement test by the virtual instruments.
本文介绍了在风洞光学测压试验中应用虚拟仪器技术对模型表面温度和模型表面光照强度的测量方法。
A new method about on line test for temperature of metal surface without contact is presented.
提出了一种新的金属表面温度非接触在线测量方法。
The application and measuring method of a slab surface temperature measuring system for secondary cooling zone of continuous casting are introduced.
本文介绍一个连铸二冷区铸坯表面温度测量系统的测量方法和实际应用情况。
A method to measure temperature of surface seawater and a certain depth seawater was presented.
提出海水的表面温度及一定深度海水温度梯度的测量方法。
Based on the process simulation and the analysis method of thermal power system, the tube wall temperature online monitoring system for high temperature heating surface was successfully developed.
在借鉴过程仿真和热力系统分析方法的基础上，开发了一套锅炉高温受热面金属壁温在线监测系统。
Online diagnoses method on conductor temperature of electric cable, based on surface temperature field of electric cable, is presented in this paper.
文中提出了一种基于电缆表面温度场的对电缆线芯温度进行在线诊断的方法。
Applies the method of surface heat transfer analysis to calculating the convective heat transfer coefficient in order to solute the wall temperature.
建立了室内表面对流辐射耦合换热方程，着重讨论了采用表面换热分析法求解表面传热系数以求解壁温的方法。
Surface temperature on gear teeth was measured by dynamic thermocouple method. A test gear construction consisting of three pieces and electric resistance was designed.
用动态热电偶法测量齿面闪温分布，设计制造可测出全齿面闪温的三片组合带电阻式齿轮结构。
The influences of process parameters include surface preparation method, cold deformation, diffusion temperature and time.
分析了表面处理方法、冷变形、扩散退火温度和时间等工艺因素对界面结合强度的影响；
A new process of room temperature blackening of copper product surface is described. The composition, function and use method of the blackening solution are presented.
报道了铜制品表面常温发黑的新工艺，介绍了发黑剂的组成、作用和使用方法。
The test results present that this method can be used in surface temperature measuring of different kinds of rotary compressors.
实验结果表明，这种方法可用于各种回转压缩机转子温度的测量。
The method that on-line identifies parameters of the model through the information of temperature on the welding bead surface and thus increases adaptability of model was discussed in the paper.
本文讨论了用焊道表面的温度信息对多个模型参数进行在线修正，提高计算模型的适应性。
The result is satisfying through comparing with experimental result, and the method of controlling the floor surface temperature is provided.
提出了单蛇型系统的对数平均温差法设计方法，并用数值模拟法和实验法进行了验证。
This method needs the infrared camera to measure the surface temperature of junction bar, the measure precision is greatly influenced by the performance of infrared camera.
该方法需要使用红外热像仪测量汇流条表面温度，测量精度受红外热像仪性能影响很大。
A method is presented to quantitatively explain the sea surface temperature profile displayed on an infrared image of the meteorology satellite using actually measured parameter as external criterion.
本文提出一个利用海上实测参数作为外定标值，定量解译气象卫星红外云图中海面温度场的方法。
Based on the method of wavelet decomposition combining with ANFIS, a compositive prediction model of the equatorial east Pacific sea surface temperature anomaly (SSTa) was established.
用小波分解和自适应神经模糊推理系统(ANFIS)相结合的方法，建立了赤道东太平洋海温的集成预报模型。
Finally, the severity of the thermal defects of the component in the electric control cabinet is identified by using a surface temperature judgment method.
最后运用表面温度判断法对控制柜内部元件热缺陷的严重程度进行了识别。
Quasi-periodic variations of the sea surface temperature (SST) field from Huanghai Sea are analysed by using the energy spectrum method.
本文用能谱方法分析了黄海的 海表面水温（SST）场的准周期变化。
Based on the electroless plating process at low temperature, a new blackening method with high quality surface was developed.
开发了一种高质量发黑工艺，它是在低温化学镀镍的基础上进行氧化处理的方法。
Furthermore, with the method of low-temperature spraying oil mist, the value of surface roughness of the workpiece has declined.
同时，采用低温喷雾冷却方法，加工表面粗糙度值也有所下降。
A determination method of active surface areas of copper-containing catalysts by pulse adsorption at an ambient temperature with co as adsorbate is described in the present paper.
介绍了用CO作吸附质，在室温下脉冲吸附测定铜催化剂中活性铜表面积的方法。
This paper deals with an effective method of laser contact irradiation on cancer of body surface in which its temperature is controlled by a computer.
介绍一种计算机测温，激光接触照射恒温治疗体表肿瘤的一种行之有效的方法。
By solving an inverse heat conduction problem, one method is given about to compute wall thickness of cylinder-shaped equipment based on the outer surface temperature.
利用红外测温技术，结合导热反问题求解，给出了一种根据圆筒外壁温度计算筒壁厚的方法。
By solving an inverse heat conduction problem, one method is given about to compute wall thickness of cylinder-shaped equipment based on the outer surface temperature.
利用红外测温技术，结合导热反问题求解，给出了一种根据圆筒外壁温度计算筒壁厚的方法。
应用推荐