Thus, working roller to perform uniform accurate grinding has not become true for roller surface rigidity and ORG grinding wheel rigidity fluctuating result in excessive or deficient roller grinding.
因此，当轧辊表面硬度波动及OR G砂轮硬度波动时常发生轧辊修磨过大或修磨不足等问题，还不能实现工作辊均匀精度修磨。
Nucleating agent is a functional accessory ingredient of polyolefin that can improve the rigidity, transparency and surface gloss of polyolefin products.
成核剂是聚烯烃的功能型助剂，它可提高聚烯烃产品的刚性、透明性以及表面光泽度。
It should have high surface precision and enough intensity and rigidity. But the limited space and weight target make the contradictions between space and rigidity, rigidity and weight.
它要求有相当高的阵面精度、刚度和强度，但有限空间和重量指标使空间与刚度，刚度与重量这些固有矛盾尖锐化。
With 20 rock bits which used in the field, bearings' surface metallography, rigidity, and the main factors influence the life of the rock bit journal bearings were studied.
收集了近几年20只现场失效牙轮钻头，对其轴承表面金相组织和硬度以及影响牙轮钻头滑动轴承失效的主要因素进行了分析。
The supporting system shall meet the requirements for rigidity and stability. The bottom shall stand on reliable base surface and shall not sink during concrete pouring.
支撑体系应满足刚度与稳定性的要求，底部支承在可靠的基层上，浇筑过程中不得下沉。
As a result, we found that the liquefaction depends on the size of strain caused by the rigidity of the surface layer and that the hypothesis accurately corresponds to what happens in practice.
结果发现液化的产生取决于地表层刚性引起的应变大小，假设与实际情况一致。
It has good properties of palladium coating, such as bright surface, high glisten rate, low contact resistance, high rigidity, antifriction, anticorrosion and so on.
利用本工艺电镀能得到性能优良的钯镀层，如外观白亮、反光率高、接触电阻小、硬度高、耐磨、耐蚀等优点。
Through alter the method on scraping contact surface between main spindle head and lathe frame, we may increase contact point and improve the contact rigidity.
通过改进普通车床主轴箱与床身接触面的刮削方法增加接触点，从而提高接触刚度。
Author analyzed the causation to affect rigidity road surface evenness degree from many aspects, and gives out the good method and suggestion to improve rigidity road surface evenness degree.
作者多方面分析了影响刚性路面平整度的原因，并提出了提高路面平整度的好的办法和建议。
With 20 rock bits which used in the field, bearings surface metallography, rigidity, and the main factors influence the life of the rock bit journal bearings were studied.
收集了近几年20只现场失效牙轮钻头，对其轴承表面金相组织和硬度以及影响牙轮钻头滑动轴承失效的主要因素进行了分析。
Chassis: large travel diving force, heavy king size chassis, good rigidity, adapt to multiple ground surface.
底盘：大行走驱动力，重型加长型底盘，刚性好，稳定性高，适合多种地面。
The key technology problems for the design of external ball surface lethe, yielding cut hydraulic pressure to lead and low rigidity of the system, were analyzed.
分析了设计外球面车床面临的关键技术问题：液压让刀，系统刚性不足的问题。
The surface is treated by anticathode oxidation which greatly improves the rigidity and anti-corrosion.
表面进行阳极氧化处理，大大提高了硬度和耐腐蚀性。
The whetting part is made of high rigidity metal, will remove the knife's surface metal by steel scurf, easy to control when whetting, and then fast shape the dull blade.
磨刀部分采用高硬度的硬质合金材料，将刀具表面的金属以钢屑的方式去除，磨刀时用力易于掌控，从而将较钝的刀锋快速修正成型。
Due to the bad rigidity and the big line inflation of the thin axis, it is hard to achieve the high processing precision and the small surface roughness.
细长轴由于其刚性差、线膨胀大，难以获得较高的加工精度和较小的表面粗糙度。
Moreover, the interaction between the membrane and polymer chain length, and the effects of bending rigidity and surface tension on the deformation of the membrane are investigated.
此外，考察了膜和高分子链段之间的相互作用，高分子链长以及膜的弯曲刚性、张力对膜形变的影响。
The large double curved reflector CFRP antenna is characterized by light weight, high strength and rigidity, high surface precision and so on.
大口径双弯曲碳纤维天线具有重量轻、刚强度高和曲面精度高等特点，适合应用于对重量控制要求严格的机载、球载雷达系统中。
Cylindrical roller adopt convexity process, so the presses of roller and race surface are proportional spacing, they can bear a large axial load, furthermore axial rigidity is strong.
圆柱滚子采用凸面加工，因此滚子与滚道之间的压力分布均匀。可承受较大单向轴向负荷，且轴向的刚性较强。
The reasons are analysed in ways and means to combined with early failure of expressway half rigidity base bituminous surface according to Henan province natural conditions.
根据河南省的自然情况，结合近年来河南省高速公路半刚性沥青路面出现的早期破坏现象，从多方面分析了产生病害的原因。
Extruded aluminum alloy cylinder body or cast steel, the surface is treated by anticathode oxidation which greatly improves the rigidity and anti-corrosion.
挤压铝合金缸体或铸钢。表面进行阳极氧化处理，大大提高了硬度和耐腐蚀性。
It has good properties of palladium coating, such as bright surface, high glisten rate, low contact resistance, high rigidity...
利用本工艺电镀能得到性能优良的钯镀层，如外观白亮、反光率高、接触电阻小、硬度高、耐磨、耐蚀等优点。
It has good properties of palladium coating, such as bright surface, high glisten rate, low contact resistance, high rigidity...
利用本工艺电镀能得到性能优良的钯镀层，如外观白亮、反光率高、接触电阻小、硬度高、耐磨、耐蚀等优点。
应用推荐