Progressive collapse method is used to calculate ship ultimate hull girder strength and the combination of surface response method and traditional method is utilized to analyse reliability.
采用渐进崩溃法计算船体总纵极限强度，将响应面法与传统可靠性计算方法相结合来进行船体总纵极限强度可靠性分析。
The results demonstrated that the response surface method in structural optimization of impacting energy absorption was feasible, and had merits of high computing efficiency and short computing time.
研究结果表明响应面法应用于碰撞吸能的结构优化问题上是可行的，具有提高计算效率，节省计算机时间等优点。
The response surface method was used to evaluate the effects of phosphates on the mussel sensory quality.
应用响应面回归分析的方法评价了不同磷酸盐对贻贝感官质量的影响。
A new method aiming to incorporate the response surface method into the computation of system reliability for composite Bridges is proposed in this paper.
提出将响应面方法和非线性有限元分析结合起来对桥梁上部结构的体系可靠度进行分析的新方法。
Response surface method was used to optimize the MRS-based enrichment medium of s.
采用响应面方法对唾液链球菌嗜热亚种增殖培养基进行了优化。
The proposed method to cluster customers is to combine response-surface method, adaptive-conjoint analysis technology and system-clustering method according to the value of customers needs utility.
综合应用响应曲面法、适应性关联分析技术和系统聚类法，提出了根据客户需求效用值进行客户群聚类划分的新方法；
Compared with other simulation technique, neural network response surface method can greatly reduce the simulation time at the same precision level.
同其他模拟技术相比，在精度相同的情况下，神经网络响应面法可以大大减少模拟时间。
The regression equations and similar factors were used to compare the predicability of the ANN and response surface method based on the binomial equations.
通过线性回归和相似因子法比较人工神经网络和基于二元二项式的响应面法的预测能力。
Experimental dat are proceeded by using data processing software STAT51 and is analyzed clearly by the response surface method.
应用数据处理软件STAT51对实验数据进行处理，并用响应面法分析实验数据。
And an optimum extraction process of sesame cake protein by alkaline extraction and acid precipitation was made through response surface method to evaluate the experiment.
建立了快速测定芝麻饼粕蛋白提取率的线性方程，通过响应面优化试验，获得碱提酸沉法提取芝麻饼粕蛋白的最佳工艺。
Optimum hydrolysis conditions of mulriple enzymes were investigated with response surface method.
复合酶酶解条件的优化采用响应面法。
The response surface method was used to optimize the culture medium for anti-fungus compound produced by Streptomyces 702 under unsterilized condition.
用响应面分析方法对链霉菌702产抑真菌物质生料发酵培养基进行了研究。
A method to analyze reliability of gravity DAMS using the second order sequence response surface method is described.
提出了用二次序列响应面法分析重力坝可靠度的方法。
Response surface method(RSM)is an efficient method to analyze the stability reliability degree for complicated structure, such as underground structure.
响应面方法是地下复杂结构稳定可靠性分析的有效方法之一。
The optimum conditions of ultrasonic wave-assisted extraction technology for litchi polysaccharides were determined with the single factor and the RSA response surface method.
通过单因素试验和RSA响应面分析法优化了荔枝多糖的超声波辅助提取工艺。
In response to the complexity of calculation for failure probability regarding fatigue crack growth life, a method for reliability analysis based on neural network response surface was presented.
针对疲劳裂纹扩展寿命失效概率计算的复杂性，提出基于神经网络响应面的可靠性分析方法。
Method: Response surface analysis was conducted for optimizing the main technical parameters with the content of total polyphenol as index, and received the regression model.
方法：以总多酚含量为指标，采用响应面法对主要工艺参数进行优化并得到回归模型。
Reliability calculation based on response surface FEM method utilizes the FEM numerical simulation to solve the reliability problems in which the analytical performance function can not be given.
响应面有限元的可靠度计算是采用有限元数值模拟来解决功能函数不能明确表示的结构可靠度计算问题的一类方法，对于大型复杂结构的可靠度分析有重要的意义。
The received surface displacements, in response to an applied dynamic excitation, are used to determine the position and geometry of embedded cracks based on a reverse elastic wave method.
基于弹性波的反问题方法，对材料施加动态激励，我们可以从接收的响应表面位移求出内嵌裂纹的位置和形状。
Conclusion: The multi-objective optimization of ondansetron hydrochloride PLGA microspheres formulation technique is obtained by response surface method.
结论：采用效应面法完成了盐酸昂丹司琼微球的多目标优化。
For structural reliability analysis of complex nonlinear implicit limit state equation, this method had lower error and higher precision than the traditional quadratic response surface method.
对于复杂非线性隐式极限状态方程的结构可靠度计算，该方法比传统的二次响应面法误差小、精度高。
Verified by network response surface, TAA was improved to be an applied and valid method of calculating the risk occurrence probability.
经过神经网络响应面法的检验，证明TAA方法是一种实用而又有效的风险概率计算方法。
On the complicated or implicit limit state functions in the reliability problems, a response surface method for reliability computation based on Support Vector Regression (SVR) is presented.
针对可靠度计算问题中极限状态函数比较复杂或为隐式的情况，提出了一种基于支持向量回归的响应面可靠度计算方法。
On the second phase, response surface method is adopted to build the accurate models in the reduced parameter ranges.
在第二阶段，在优化设计区间中利用响应曲面法建立锡膏印刷过程的精确模型。
Conclusion: Central composite design and response surface method can be used in continuous range analysis, with the short experimental cycle and, the advantages of high precision.
结论：响应面法可在连续范围内进行分析，具有实验周期短，精密度高的优点。
Based on the results of single-factor experiments, a quadratic regression model was established with the help of two factors central composite experimental design and the response surface method.
在单因素试验基础上，利用二因素中心组合设计原理及响应面法分析建立二次回归模型。
The response surface approach and the finite element method are introduced to the earthquake-resistant reliability analysis of unequal height mill building, and a general method is presented.
把响应表面法和有限元法引入不等高厂房抗震可靠性分析中，提出了一般方法。
Based on the analysis of physical and mechanical parameters of bedding stratified rock slope of Xuefeng open pit, the rock slope reliability is calculated by the response surface method, th...
通过对雪峰露天矿山顺层岩质边坡的岩体结构力学参数进行分析，应用响应面法计算边坡可靠度，结果与实际情况基本相符。
Based on the analysis of physical and mechanical parameters of bedding stratified rock slope of Xuefeng open pit, the rock slope reliability is calculated by the response surface method, th...
通过对雪峰露天矿山顺层岩质边坡的岩体结构力学参数进行分析，应用响应面法计算边坡可靠度，结果与实际情况基本相符。
应用推荐