Experimental results can be reasonably explained by "surface diffusion model".
该实验结果可通过“表面扩散模型”得到合理解释。
The influence of surface diffusion on CVD diamond nucleation was found very important.
表面扩散对CVD金刚石成核有重要影响。
The existence of the step distinctly changes the activation energy of surface diffusion.
由势能面确定了最低能量表面扩散途径。
A great impact of surface diffusion on CVD diamond nucleation is discovered and investigated.
发现和研究了表面扩散对CVD金刚石成核的重要影响。
And the influence of surface diffusion speed along void surface on interface diffusion was also analyzed.
另外还研究了空洞表面扩散快慢对界面扩散的影响。
Last but not least the substrate surface temperature influences growth of the diamond due to surface diffusion and recombination effects.
最后但并不是最不重要的是，由于表面扩散和重新组合的缘故，基体表面温度对金刚石的生长也有影响。
Surface strengthening technologies are reviewed from the points of surface quenching, surface diffusion thermochemical heat treatment and surface coating.
从表面淬火、表面扩散化学热处理和表面覆层强化三方面介绍了提高塑料模具使用寿命的表面强化技术。
Based on the theory of surface diffusion, a finite element method was developed to simulate shape evolutions of two-dimensional microcracks with surface perturbation.
根据表面扩散控制下物质迁移规律，建立有限单元法，对裂面形貌扰动下二维微裂纹演变过程进行数值模拟。
The surface diffusion model were established to simulate the adsorption process of sisomicin on the exchange resin D113. The model was solved by orthogonal collocation method.
在动力学研究中，建立了西索米星在D113（皖）树脂上的吸附表面有效扩散模型，利用正交配置法求解动力学模型。
In process parameters, the rf power and pressure affect the number, energy and composition of the basic elements, the substrate temperature effect the surface diffusion and atomic bonding.
工艺参数中，射频功率和压强综合影响了基元数量、能量以及成分，基片温度主要影响表面扩散、原子成键。
Another mechanism promoting the formation of the equilibrium phase graphite is surface diffusion which becomes stronger anyway at higher temperatures, especially in areas with high defect density.
促使平衡相石墨形成的另一个机理是表面扩散。不管怎样，此扩散在高温，尤其是在缺陷密度高的区域更明显。
As well located at the mountain terrain special surface, the gas diffusion process more complicated.
由于井场所位于的山区地形下垫面特殊，气体扩散过程比较复杂。
The osmotic gas beneficiation on another surface of films and diffusion in the air.
渗透气体在膜的另一表面上富集，并向空气扩散。
The model consists of a set of algorithms, describing the processes of advection, turbulent diffusion, surface spreading, vertical dispersion, emulsification and evaporation.
该模型包含了一系列的数学公式来描述对流、湍扩散、表面扩展、铅直扩散、乳化和蒸发过程。
The leaching process is controlled by mixed steps:the surface chemical reaction and the diffusion passing through the silicon and iron mineral phases.
浸出过程属于混合控制，即表面化学反应与通过不溶硅、铁矿物相的扩散为过程的控制步骤。
The competition between the diffusion of deposited particles and grain growth of thin films determines surface evolution of thin films.
沉积粒子的扩散和晶粒生长之间的竞争决定了薄膜表面演化。
Based on the density functional theory, the first principles calculation was performed to investigate the bulk, surface copper and the diffusion in the copper thin film.
本文应用基于密度泛函理论的第一性原理赝势法，较系统地研究了铜体相和表面相，以及锂离子在铜薄膜中的扩散行为。
Adsorption of sucrose on activated carbon is a chemical adsorption process and belongs to mono-molecular surface adsorption. The adsorption rate is controlled by internal diffusion.
活性炭吸附蔗糖是一种化学吸附过程，蔗糖是以单分子铺展的形式被吸附于活性炭表面，其吸附速率由内扩散所控制。
The paper also briefs the nozzle or moving blade surface hardening treatment technology, including plasma spraying and diffusion layer for preventing the nozzle and moving blade from SPE.
文章还介绍了为预防汽轮机喷嘴和动叶片免受固体颗粒侵蚀所采用的表面硬化处理技术，包括等离子喷涂层和扩散渗层在内；
The boundary condition at bed surface of diffusion equation of nonuniform sediment is derived based on the concept of exchange intensity of stochastic theory by the author.
文中首先给出了由我们建立的床面泥沙交换理论导出的非均匀沙扩散方程的边界条件。
A method of surface metallization of diamond, temper powder diffusion heat treatment, was developed.
研究粉末扩散法使金刚石表面金属化的工艺。
In this paper, the present research on the surface modified the weldability of ceramic materials during brazing and diffusion welding was reviewed.
综述了表面改性在陶瓷钎焊和扩散焊领域应用的研究现状，并展望了表面改性技术在材料焊接领域的应用前景。
In order to study the growth mechanism of protein crystals, the surface morphology of(101) face of lysozyme crystals obtained by gas diffusion method was observed by AFM imaging.
为研究蛋白质晶体的生长机理，采用气相扩散法制备溶菌酶晶体，使用原子力显微成像技术观测了溶菌酶晶体（101）生长面的形貌。
The influences of process parameters include surface preparation method, cold deformation, diffusion temperature and time.
分析了表面处理方法、冷变形、扩散退火温度和时间等工艺因素对界面结合强度的影响；
The experimental results show that the growth mechanism of the KTP crystal coincides with the linear law and the law of the parabola of surface or volume diffusion of the BCF atomic growth theory.
实验结果表明，KTP晶体生长机制与原子化的BCF生长理论的面扩散或体扩散的线性定律与抛物线定律相吻合。
In the thesis, we investigate submonolayer and multilayers film growth process, especially study the influence of surface heterogeneities on adatoms diffusion and aggregation.
本论文研究了非均匀基底上亚单原子层薄膜与多层薄膜的生长行为，考察了基底的非均匀性对原子扩散、聚集过程的影响。
The results showed that the vacuum boronizing pretreatment method effectively reduced the diffusion and mobility of Co in the substrates and obviously roughened the surface of the cemented carbide.
结果表明，真空渗硼预处理不仅可以有效的消除或控制钴在金刚石沉积时的不利影响，而且，还显著粗化硬质合金基体表面。
The results showed that the vacuum boronizing pretreatment method effectively reduced the diffusion and mobility of Co in the substrates and obviously roughened the surface of the cemented carbide.
结果表明，真空渗硼预处理不仅可以有效的消除或控制钴在金刚石沉积时的不利影响，而且，还显著粗化硬质合金基体表面。
应用推荐