The characteristics of the silane films were investigated by SEM, FTIR, EDS and surface contact Angle analyzer.
利用SEM、FTIR、EDS、表面接触角分析仪等研究硅烷膜的表面形貌与结构特征。
With increasing the content of PEG in block copolymer, the surface contact Angle and the adhered bacteria on surfaces of polymers decreased.
PEG嵌段在共聚物中的含量越高,材料表面接触角越小,黏附的细菌越少。
Through measures such as surface contact Angle method and infra-red spectrum, the effects of particle size, particle surface activity, particle shape, etc were studied.
通过对改性产品接触角测量和红外光谱分析,探讨了颗粒粒度、表面性质、晶体结构对填充橡胶性能的影响。
The result showed that the surface free energy of rice-straw board was higher than that of rice-straw, the surface contact angle was diminished gradually from the mixed gluing li…
试验结果表明,稻草刨花板的表面自由能高于稻草原料,不同配比的UF和MDI混合胶液在稻草刨花板表面的接触角是随着时间的延长而减小最后逐渐趋于稳定。
The modified illite was evaluated by some measures such as surface contact Angle method, infra-red spectrum method, which all indicated that the illite had been modified effectively.
经表面接触角、红外光谱等方法预先评价得知,伊利石的确得到改性。
The higher the surface energy of the solid substrate in relation to the surface tension of the liquid, the better its wettability, and the smaller the contact Angle.
较高的表面能量的固体基质有关的表面张力的液体,它的更好的润湿性,较小的接触角。
The contact Angle is the Angle between the tangent line at the contact point and the horizontal line of the solid surface.
接触角是角之间的切线的联络点和水平线的固体表面。
Contact Angle is one of the handiest and most widely used methods, which are used to identify solid surface.
接触角是最方便、应用最广泛的表征固体表面的标准方法之一。
The article has accounted what Sodium Carboxy Methylcelluos effect to washing action by Samples' experimental datas of surface tension and contact Angle.
本文利用各种样品的表面张力和接触角的实验数据,说明羧甲基纤维素钠对洗涤作用的影响。
The property changes of foam rubber surface before and after the treatment were studied by XPS and contact Angle measurement.
通过X射线光电子能谱分析和接触角测定,研究了处理前后泡沫橡胶表面性质的变化。
Performance of surfactant can be got by pure analysis and experiment, which explores surfactant' s critical micell concentration, surface tension and coal's contact angle.
通过对表面活性剂表面张力、临界胶束浓度及溶液对煤体接触角的理论及实验分析,得到表面活性剂的性能指标。
The simulation results indicated that heat transfer coefficient increased with increasing surface free energy difference and decreasing contact Angle hysteresis.
模型计算结果表明液固表面自由能差越大、接触角滞后越小则越有利于冷凝传热。
The changes of properties of grafted surface, such as contact angle, adsorption, functionalization, protein immobilization, environment-sensitive graft chain, are specialized.
列举了接枝表面的性质,如接触角、吸附性、功能化、蛋白质固定化、环境敏感性等的变化。
The effects of preparing conditions on surface modification of graphite were introduced. The morphology observation, contact Angle determination and TG-DTA analysis were carried out.
介绍了包覆条件对石墨表面改性的影响,对改性后的石墨进行了形貌观察、接触角测定、差热-热重分析。
Based on the measurement of the contact Angle of differently treated ITO, the surface energy and polarity were calculated using the harmonic mean method.
在测量ito接触角的基础上,应用调和平均法计算了不同表面处理ITO阳极的表面能和极性度。
The roughness of the solid surface has little influence on the dynamic contact Angle.
固体表面粗糙度对动态接触角的影响不大。
Many properties of material were tested, such as mechanical property, surface water contact Angle, water absorption rate, infrared spectrum and ESCA analysis.
测试了材料的力学性能、表面接触角、吸水率,同时对材料进行了表面电子能谱(esca)分析。
Surface properties of PVC were characterized by the contact Angle, surface tension, X-ray photoelectron spectroscopy (XPS) and electron spin resonance (ESR).
等离子体改性前后pvc的表面特性通过接触角、表面张力、X -光电子能谱(XPS)、电子自旋共振(esr)表征。
Chemical roughening method was applied to treat plastic surface, roughness and contact Angle of plastic surface were determined before and after it was treated.
采用化学糙化法对塑料表面进行处理,测定了处理前后表面的粗糙度及接触角。
Based on the surface energy theory, it can be found that the contact angle decreased with increasing the saline-fog conductance.
首先采用单筒连续变倍视频显微镜观察试品表面,利用表面能理论分析表面接触角随着盐雾电导率的增大而减小。
Factors that effect the preciseness of contact Angle measurement are the roughness of the solid surface. The change of temperature and equilibrium time effect the contact Angle slightly.
影响接触角法测定准确的主要因素为表面粗糙度,此外温度变化及平衡时间对接触角也略有影响。
Monofilament contact Angle meter has been used to measure the critical surface tension of glass fiber treated by different coupling agents.
本文应用单丝接触角测定仪测定了不同偶联剂处理的玻璃纤维临界表面张力。
Wettability and surface topography of modified PU films were measured by contact angle meter and SEM.
用接触角测量仪和扫描电镜观察聚氨酯膜改性前后的表面润湿性和表面形貌的变化;
In terms of viscosity, osmosis time, contact angle and oil absorption this paper evaluates the effect of surface modification of mineral filling.
本文主要介绍改性石英填料的粘度、 浸润性能(渗透时间、浸润角、浸润点等)等指标,以及表面改性效果的评价方法。
The surface of sorghum straw is modified with chemical in this work. By measuring the contact angle of water on the surface of sorghum straw, the effects of several treating method were compared.
以高粱秆为原料,对其表面进行化学处理,根据处理前后接触角的变化,分析各种方法的处理效果。
The mechanism of the surface change, as is reported in this paper, has been studied by the pull-out test, XPS, SEM, contact angle measurements.
本文通过单纤维拔出实验、XPS、SEM、接触角测算等研究了表面改性的作用机理。
According to galvanochemistry, measurement results of contact Angle, adsorption of xanthate on the mineral surface, and the surface properties of depressed pyrite in oxidized state were analyzed.
根据黄铁矿的电化学性质、接触角测定和黄药在矿物表面的吸附量测定,分析了黄铁矿在氧化状态下受抑时的表面性质。
In addition, the surface properties of modified carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS) and single fiber contact Angle test.
针对改性处理后的碳纤维的表面性能,进行X射线光电子能谱和单纤维接触角测试。
In addition, the surface properties of modified carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS) and single fiber contact Angle test.
针对改性处理后的碳纤维的表面性能,进行X射线光电子能谱和单纤维接触角测试。
应用推荐