The solidification process of the surface composite layer was also analysed in this paper.
本文分析了表面复合材料层的凝固过程。
The casting-infiltration method is one of the main means of preparing particles reinforced surface composite.
对铸造烧结法制备铁基表面复合材料，表面复合层的点火特征进行研究。
Using a prefabricated porous ferroboron lump, a surface composite layer was made on gray cast iron matrix, with a common casting method.
通过预先制备带有孔隙的硼铁合金预制块，用普通浇注的方法，获得以灰铸铁为基的铸造表面复合材料。
Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.
通过低压铸造后固溶处理的方法，获得了网状金属间化合物增强铝合金表面复合层。
Composite processing center mainly refers to five surface composite processing, automatic rotation of the spindle head for vertical processing.
复合加工中心主要指五面复合加工，可自动回转主轴头进行立卧加工。
In order to get accurate measurement result, this paper proposes an error dynamic amendment method and USES it in the online dynamic measurement system of clean surface composite board.
给出一种误差动态修正方法，该方法基于对额外设置的基准块的动态测量及计算机对数据的自动修正，在具有光洁表面的板材厚度的在线测量中得到了较好地应用。
Simply placing components on the work surface does not complete a composite application; the components must be wired together.
只将组件放在工作表面不能完成复合应用程序；必须将这些组件连接在一起。
This is one way to surface several on-ramps into your composite application, and you should consider this approach as well as navigation design and implementation.
这是将多个入口点加入到复合应用程序的一种方式，您应该考虑该方法以及导航设计和实现。
The XOR effect is not the result shown in Figure 1, but it does show how the composite is responsible for rendering the icon onto the drawing surface.
异或的效果虽然不是如 图1 所示的结果，但它确实表明了composite是如何负责在图标的绘图表面上进行着色的。
The surface must be carefully prepared for any kind of bond to perform as expected. When laminating with epoxy, I prepare a cured composite surface as follows.
要想达到预期效果，不论何种粘接，必须仔细做表面的准备。当用环氧树脂层压复合时，我对固化复合表面的准备如下。
Composition and surface properties of obtained composite sub-micron particles have been studied in comparison with those of ferrite-free PLGA sub-micron particles.
将由此而来的混合亚微粒的组分和表面性质与不含铁氧体的PLGA亚微粒进行了对比研究。
The paper presented the method to detect the pollution degree of composite insulator surface by measuring its grounding current.
文章提出了通过测量绝缘子接地电流来检测复合绝缘子表面污秽程度的方法。
Electroless composite plating is one of new surface process techniques.
化学复合镀是一种新型表面处理技术。
The surface property of the composite particles was improved, then can be added to the resin and improved the electromagnetism properties of the resin.
制得的复合粒子的表面性质得到了改善，可以添加到树脂基体中，提高树脂基体的电磁等性能。
RCC-AC composite pavement is a pavement structure using a special technique to combine the asphalt concrete surface with the rolled concrete plate used as a base in a proper way.
AC复合式路面是将沥青混凝土面层与碾压混凝土板采用特殊技术有机地组合在一起的一种路面结构。
A new method aiming to incorporate the response surface method into the computation of system reliability for composite Bridges is proposed in this paper.
提出将响应面方法和非线性有限元分析结合起来对桥梁上部结构的体系可靠度进行分析的新方法。
Transparent nano composite film on the surface of glass of hydrophobic property is prepared with sol-gel processing.
采用溶胶-凝胶法在玻璃表面制备出透明的憎水性纳米复合薄膜。
This paper introduced mode of collecting, technology of filtering and measuring process about image of three dimension composite preform surface.
首先介绍了三维编织复合材料预制件表面图象的采集方式、滤波技术以及平均编织角的测试过程；
The relationship between detonation welding, detonation composite materials and surface engineering was discussed in this paper.
讨论了爆炸焊接、爆炸复合材料与表面工程的关系。
This paper introduced the development of agricultural synergistic agent that include the composite surface active agent, synergist and some accessory ingredient.
介绍了以复合表面润湿剂为基料，引入增效成分以及其他多种助剂而成的农用增效助剂的研制过程。
Quadrilateral partition on triangular meshes data is the primary process of composite surface modeling.
四边形网格划分是组合曲面建模技术的首要条件。
The result shows that the surface of composite film is very smooth, and the dielectric properties are close to the conventional polycrystalline diamond films.
结果表明，复合结构由普通多晶金刚石薄膜和纳米金刚石薄膜组成，薄膜的表层结构体现了纳米金刚石的特征。
Based on the experiment on diamond composite surface, the paper describes the effect of pressure and temperature on diamond synthesis, proving that the theory of composite surface is correct.
根据金刚石合成曲面实验，描述压力和温度对金刚石合成效果的影响，证明了合成曲面理论的正确性。
In this paper, conductive layer was made on the surface of composite ply, such as flame spraying aluminum coating, expanded aluminum foil, aluminum foil.
结合复合材料自身的弱导电性特点，通过在其表面增加导电功能层的方式解决复合材料的防雷击问题。
The embedded nanometer diamond particles don′t change the structure of Ni-P matrix, but coarsen the surface of the composite coating with a large number of spherical particles.
纳米金刚石的嵌入不改变复合镀层的结构，但使镀层表面形成不平整的、微小球粒堆砌状形貌。
Introduce the characteristics and preparation methods of nanometer materials as well as its surface-treating methods in the polymer-nanometer material composite.
介绍纳米材料的特性、制备方法及聚合物基纳米复合材料中纳米材料的表面处理方法。
Besides, the surface of the composite material can be largely covered by the fungi, or even produce actual mushrooms grown on the cellulose (Fig. 13.1).
此外复合物材料的表面被菌类覆盖，有真正的菌类长在纤维素上(图13.1)。
Besides, the surface of the composite material can be largely covered by the fungi, or even produce actual mushrooms grown on the cellulose (Fig. 13.1).
此外复合物材料的表面被菌类覆盖，有真正的菌类长在纤维素上(图13.1)。
应用推荐