Tolerances cover dimensional variation and surface-roughness range and also the variation in mechanical properties from heat treatment and other processing operations.
公差这个概念既包括尺寸偏差范围和表 面粗糙度范围，也包括由热处理和其它处理操 作所引起的机械特性的变化。
A subterranean flow of briny water could rearrange sand grains or alter surface roughness in a way that darkens its appearance.
地下水流的流动会使得沙粒积累，并使得表面变得粗糙，从而颜色更深。
Studying the air flow around soccer balls is a natural extension of McKeon's research, in which she and her colleagues study how surface roughness affects air flow, using spheres as test models.
研究足球周围的气流是麦凯恩课题的一个自然延伸——她和她的学生正在研究粗糙表面对气流的影响，而足球课作为球体的测试模型。
Only in surface roughness of the finishing time is important.
表面粗糙度只有在精加工的时候才是重要。
Cutting speed only in the surface roughness not required when it is not important.
切削速度只有在对表面粗糙度不做要求的时候才不重要。
The raw data output from the measuring equipment for surface roughness and coating thickness must be attached to all required documentation.
对所需的所有文档还必须附上测量设备测量表面粗糙度和涂层厚度时输出的原始数据。
Under high speed lightly loaded conditions, skidding damage often becomes one of the main damage forms for cylindrical roller bearings while surface roughness has great effect on skidding damage.
在高速和轻载工况条件下，打滑擦伤往往成为圆柱滚子轴承的主要失效形式，而表面粗糙度对轴承打滑损伤有很大的影响。
For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers.
为了取得很好的粘结，粘结剂必须能克服表面粗糙和边界层的反应。
The radar, called the Mini-SAR, sends pulses of left-polarized radio waves out to measure the surface roughness of the moon.
那个叫做Mini-SAR的雷达，通过向月表发射左旋极化电磁脉冲来测定月球的表面粗糙度。
Surface roughness codes and their labeling.
表面粗糙度的代号及其标注。
The effects of grinding parameters on surface roughness of Marine propeller blade were studied by using orthogonal test.
通过正交试验研究了磨削参数对船用螺旋桨叶片表面粗糙度的影响。
The steel dies with high dimensional accuracy, low surface roughness and long service life have been quickly produced by using prototyping resin molds as patterns of ceramic investment casting.
直接利用激光快速成型的原型树脂模，结合陶瓷型精密铸造技术，制得了高精度、低表面粗糙度、高使用寿命的钢模具。
Effect of different machining parameters upon the inner surface roughness and the removal rate was analyzed.
分析了不同加工参数对被加工内圆表面粗糙度和研磨量的影响。
Effects of different preparation procedures on abutment surface roughness.
不同预备程序对基牙表面粗糙度的影响。
Be able to label and read surface roughness codes, codes of size tolerance and fitting, and geometrical tolerance codes.
会正确注写和识别表面粗糙度代号，尺寸公差与配合代号，形位公差代号。
Objective: To evaluate the influence of denture material and its surface roughness on retention of upper complete denture .
目的：评价全口义齿基托材料及其表面粗糙度对义齿固位的影响。
Most of the theoretic formulas to calculate the ground surface roughness are based on the geometrically generating interaction between grits and workpiece surface.
大多数计算磨削表面粗糙度的理论公式都是基于砂轮表面磨粒与工件表面的几何创成机理建立的。
The surface roughness parameters can be measured in the time by a computer. Compared with metrological WYKO profiler, the measured results are consistent.
计算机控制测量，即时给出表面粗糙度参数，测量结果与计量用WYKO轮廓仪比对，结果吻合。
Grinding force and surface roughness of ELID grinding compared to conventional grinding were also analyzed.
并将磨削力、磨削表面粗糙度与普通磨削进行了比较。
Cutting force, grinding force and surface roughness of grinding are the most important parameters to scale machine progress, thus precision methods for them is needed in engineering.
切削力、磨削力和磨削表面粗糙度是表征切削加工和磨削加工的最重要特征量，对它们进行预测分析和过程控制具有十分重要的意义。
The findings confirm a theory, developed by Godin and published in 2002-05, that tsunamis in the deep ocean can be detected remotely through changes in surface roughness.
相反，这项成果进一步证实了高丁他们在2002-2005期间形成并公开发表的理论，即认为海啸在开阔的深海传播期间，可以通过遥感方法对其造成的海水汹涌程度进行观测。
The influence of the flange surface roughness.
表面粗糙度的影响。
In the article, the surface roughness of Oriented Strand board has been researched from the air forming, applying the surface fine material to improve the board-surface smooth.
本文对定向结构刨花板表面粗糙问题从工艺和设备上进行深入的研究，通过气流铺装施加表面细化材料以提高板面平整度。
The tool lifespan, surface roughness and main cutting force of the two kinds of tools with different machining parameters are used as the evaluation criterion of machining ability.
以这两种刀片在不同切削用量条件下的耐用度、加工表面粗糙度和主切削力作为刀具加工性能的评价依据，同时研究了刀片的磨、破损机理和卷、排屑稳定性。
Interface leak So, gaskets are different, the requirements of the flange surface roughness is not the same.
所以，垫片不同，所要求的法兰表面粗糙度也不相同。
Flange surface roughness of the influence, especially sealing effect when using the soft cushion, seal surface coarse degree value big are caused by the leak is one of the main reasons why.
法兰表面粗糙度对密封效果影响很大，特别是当采用非软质垫片时，密封表面粗糙的度值大是造成泄露的主要原因之一。
For influence factors and rules of machined surface roughness, we studied on the influence factors of machined surface roughness such as scallop-height, path interval, feed rate and optimum tool path.
在表面粗糙度的影响因素和影响规律方面：主要研究了残留面积高度、走刀行距、每齿进给率和最优化走刀路径对零件加工表面粗糙度的影响。
For influence factors and rules of machined surface roughness, we studied on the influence factors of machined surface roughness such as scallop-height, path interval, feed rate and optimum tool path.
在表面粗糙度的影响因素和影响规律方面：主要研究了残留面积高度、走刀行距、每齿进给率和最优化走刀路径对零件加工表面粗糙度的影响。
应用推荐