Emergent properties arising via thermodynamic and morphodynamic constraints are abundant in non-life: the hardness of minerals; the malleability of metals; the surface tension of liquids.
非生命物质，由于热力学和形态动力学约束，得到的自然发生的性质是丰富多彩的：矿物的硬度，金属的延展性，以及液体表面的张力。
Surface hardness improvements of Nylon 6 implanted with ions were linked to mechanism of energy loss of ions.
离子注入后，尼龙6表面硬度提高与离子能量损失机制有关。
Surface hardness will not be increased after the EDM process which simplifies the following machining procedures.
在进行放电（电火花）加工后，表面硬度不会增高，可简化其后的加工工序。
Ungula and ring fracture are due to higher surface hardness. The rational suggestions to settle fracture are put forward.
爪形和环形断裂由表面硬度偏高造成，并提出解决断裂问题的合理化建议。
As the size of parts to be hardened increases, the surface hardness decreases somewhat even though all other conditions have remained the same.
即使所有其它条件保持不变，随着要淬火的零件尺寸的增加其表面硬度也会有所下降。
Combining the tempering behavior with the grinding thermal model, the change in surface hardness due to grinding heat could be predicted.
通过合并磨削热模型和回火效应可以预测工件磨削后的表面硬度变化。
Thus, these rolls require a higher surface hardness and must be hardened to a greater depth.
因此，辊子需要较高的表面硬度和较深的硬化层深度。
Combining the tempering behaviour with the thermal model of grinding, the change in surface hardness due to grinding heat can be predicted.
通过合并磨削热模型和回火效应，可以预测工件磨削后的表面硬度变化。
The laser hardening material can effectively improve the surface hardness and wear resistance.
认为激光硬化处理能够有效地改善材料的表面硬度和耐磨性。
Moreover, the variation law of mold surface hardness and interface heat transfer coefficient were studied.
另外，研究了消失模铸造法铸型表面硬度、界面换热系数的变化规律。
Tempering resulting from grinding heat caused surface hardness changes of hardened steels after grinding.
磨削热导致回火引起淬硬钢磨削后表面硬度变化。
The results showed that the steel after combined treatment had higher surface hardness and wear resistance, and prolonged the service life of cutting tool.
结果表明，该钢经复合处理后，具有较好的表面硬度和良好的耐磨性，显著地增加了刀具的使用寿命。
The article introduces the method of superhardening treating hard alloy drawing die core with thermochemistry copermeation method so as to improve its surface hardness.
介绍采用热化学共渗法对硬质合金拉丝模芯进行超硬化处理，以提高其表面硬度的方法。
The product exhibits excellent clarity, toughness, chemical resistance, surface hardness, mar resistance, dimensional stability, and UV light screening properties.
该产品具有优良的透明度，韧性，耐化学性，表面硬度，抗磨损，尺寸稳定性，和抗紫外线等特点。
The grinding burn causes the surface hardness falling off and wear speeding up.
磨削烧伤使表面硬度下降，磨损加剧。
The surface hardness of the materials having different compositions before and after absorbing water was studied, and the best formula was determined.
通过改变组分配比，研究水泡前后材料表面硬度的变化，筛选出最佳配方。
Analyse the reason that surface hardness of quench needle is not enough under original production technology circumstance of factory.
分析了工厂网带炉条件下淬火织针表面硬度不足的原因。
The surface hardness variations of some kinds of polymers were compared and the influence factors such as ion species, particle energy and dose were analyzed.
通过比较几种不同类型的聚合物材料在注入前后表面硬度的变化，分析注入离子种类、注入能量、注入剂量等工艺参数对聚合物的影响。
The relationship between the surface hardness of ferromagnetic material and the intensity of Barkhausen noise was studied.
通过实验研究了巴克豪森噪声强度与铁磁材料表面硬度之间的关系。
The influence of filling coefficient on mechanical properties, including surface hardness, impact and flexural strength, are investigated.
考察了填充系数对力学性能的影响，包括表面硬度、冲击强度和弯曲强度。
Products with high surface hardness and resistance to impact, color of paint for imports of metal, pure color, strong adhesion, it is not easy discoloration.
产品具有很高的表面硬度和抗冲击性能，彩色部分为进口金属烤漆，色彩纯正，附着力强，不易变色。
During the past 20 years, several processes have been introduced to obtain enhanced surface hardness of steels.
在过去的20年里，一些工艺被引入用来提高钢的表面硬度。
After drying, the workpiece surface hardness will be increased, smooth and beautiful.
干燥后，涂装物表面硬度提高，光洁亮丽。
Suggestion: pump shaft or protective set of surface hardness to achieve 60hrc.
建议：泵轴或防护套的表面硬度要达到60hrc。
The relationship was studied among the formation condition of the amorphous state and the surface hardness, abrasion and corrosion, and the heat endurance of the amorphous state was tested.
研究激光形成非晶态的工艺条件与其表面硬度以及磨蚀及腐蚀的关系，并对非晶层的热稳定性进行测试。
Compared with the prior art, the method has the advantage of ensuring low cost, long lifespan, high surface hardness, high wear resistance and the like.
与现有技术相比，本发明具有成本低、寿命长、表面硬度和耐磨性高等优点。
Compared with the existing wood floor, the utility model has the advantages of better surface hardness and the improvement of added value of the floor.
与现有的木地板相比具有较好的表面硬度，提高了地板的附加值。
For obtaining high surface hardness and great thickness, the main factors which affect the nitriding layer structure and properties were analyzed, and the optimized parameters were obtained.
以获得较高表面硬度和渗层厚度为依据，分析影响渗氮层结构和性能的主要工艺因素，确定出最佳工艺参数。
The results show that the laser melting may improve the surface hardness and wear resistance of AZ91D magnesium alloy, but the corrosion resistance will not be increased.
结果表明，激光熔凝能提高镁合金的表面硬度及耐磨性，但未能提高其耐蚀性能。
The results show, surface treated by laser hardening can improve the surface hardness and wear resistance.
结果表明，激光硬化处理的表面能够有效地改善材料表面硬度和耐磨性。
应用推荐