Surface Mount Component Reflow repair on various substrate materials.
表面贴装元件回流可修复不同衬底材料。
The effect of substrate materials and its temperature on film micro structure is studied.
研究了衬底材料、基片温度对膜微结构的影响。
In this paper, substrate materials of diamond films by chemical vapor deposition are discussed.
讨论了化学气相沉积金刚石薄膜的各种衬底材料。
The effects of components, thermal treatment and substrate materials on the performance of PS304 were analyzed.
本文主要分析了组份、热处理和基体材料对PS 304性能的影响。
The electron field emission from nanocrystalline diamond films on different substrate materials was investigated.
研究了不同衬底上纳米金刚石膜场电子发射性质。
By using the catalyst pyrolysis method, the carbon nanotube film was prepared on the different substrate materials.
采用催化剂高温分解法，在硅片上成功地制备了碳纳米管薄膜。
The occurrence of impurities during the deposition process can also be caused by the evaporation of certain substrate materials.
沉积过程中杂质也可因某些基体材料的蒸发而产生。
With the conventional screen-printing process, the improved grid structure was fabricated using the mica plate as substrate materials.
应用云母板作为栅极基底，结合常规的丝网印刷工艺，制作了改进的栅极结构。
Analysis showed that under the different condition of substrate materials, sizes of radiator, the flux LED bulbs attenuate different affect extent.
分析发现基板材料、散热器大小不同，达到平衡状态时的温度不同，对LED灯的光通量衰减影响程度不同。
In multilayer interconnected substrate dielectric constant of the substrate materials immediately affects transfer velocity of signal in the device.
在多层互连基板中，基板材料的介电常数直接影响器件信号的传输速度。
And the experimental results show that diamond films nucleation feature and mechanism are different on different above mentioned substrate materials.
实验结果表明，金刚石薄膜在上述衬底材料上的成核特点和成核机制不同。
The addition of PS can reduce the dielectric constant of glass-ceramic substrate materials effectively, but reduce the flexural strength at the same time.
在玻璃陶瓷基板材料中加入PS有机球能有效地降低基板的介电常数，但同时影响基板的抗折强度。
The particular requirement on substrate materials selecting, thin film structure design and monitor and control of thin film thickness has been discussed.
讨论了在基底材料选择、膜系设计以及膜厚监控等方面要求的特殊性，并给出了一些滤光片设计和监控的要求。
The low sintering and low dielectrics substrate materials and their properties, and the organic additives for tape casting slurry are compared and analyzed.
对目前已研究和使用过的低介电常数和低烧结温度基板材料及综合性能，流延浆料有机添加剂进行了对比分析。
The multiplayer moralization technology, main substrate materials, the laws for integrating technologies, design methods are discussed. Some examples are given.
系统探讨了多层金属化工艺、主要衬底材料、工艺集成规则、集成无源模块组装工艺、设计方法及设计实例等关键工艺技术。
Its research and production status are generalized in the paper. Simultaneously, exploitation on substrate materials with high porosity and thin wall is the pivot.
笔者对这两类载体的研究及生产现状作了概括，提出开发高孔隙率、壁薄的载体材料是目前研究的重点。
Results show the particle size of gradient layers should be less than the mean flow pore size of substrate materials so as to obtain the optimum filtration performance.
结果表明，为获得复合材料的最佳过滤性能，梯度层的粉末粒度必须小于基体的中流量平均孔径。
Using the high-quality mica plate as substrate materials, a new gate electrode structure was fabricated successfully with silver slurry and simple screen-printing process.
利用优质云母板作为栅极结构基底材料，结合简单的丝网印刷工艺将导电银浆制作成条状栅极，制作了新型的栅极结构；
The decrease of the gate oxide, the differences of field oxides processing and the selection of the substrate materials will all affect the total dose radiation effects of MOS devices.
器件栅氧厚度的减小、场氧工艺的改变以及衬底材料的不同等都将导致MOS器件的总剂量辐射效应发生改变。
General styryl products use of alcohol and petroleum solvent kind of weak solvent-cracking occurs, some substrate materials because of their factors will also cause cracking phenomenon.
凡是苯乙烯成品搁置酒精和火油解溶剂类弱溶剂也会爆发龟裂，一些承印物质料由于本身成分也会导致龟裂的本体爆发。
The effect of dielectric constant, dielectric loss factor, coefficient of thermal expansion (CTE)and characteristic impedance of substrate materials on properties of MMB are mainly discussed.
介绍了微波多层板所用基材的性能参数，重点阐述了材料的介电常数、介质损耗、热胀系数、特性阻抗对多层板性能的影响。
The fact that different substrate materials require different optimal processing conditions and demonstrate different condensation heat transfer coefficient, can be drawn from the present results.
实验结果也表明冷凝表面基体材料对冷凝传热性能有一定的影响。
They are composed of four different materials, which must be uniformly deposited on a backing material, or substrate.
它们由四种不同元素组成。四元素沉积在一基质元素中。
Researchers are building the surfaces out of metallic materials on a substrate.
研究人员塑造出衬底上金属材料的外表面。
Ordinary widow glass is used to serve as substrate and encapsulation materials of the cadmium sulphide thin film solar cells, which is encapsulated by all-glass for terrestrial application.
用普通窗玻璃作为硫化镉薄膜太阳电池的衬底和囊封材料，制备了供地面条件下使用的全玻璃封装的太阳电池。
By microwave designing for substrate heating materials, the larger uniform temperature field areas than the diameter of substrate holder in MPCVD device is obtained.
通过对基片加热材料的微波设计，在MPCVD装置中获得大于基片台直径的均匀温度分布区。
A low-temperature radiation heater and substrate heater are designed and made aiming at the low evaporating temperature of organic semiconductor materials.
针对有机半导体材料的蒸发温度低的特点，设计并制作了低温辐射式加热器和衬底加热器。
The newly developed low loss, low dielectric constant and low temperature co fired ceramics (LTCC) materials are the best substrate for microwave MCM technology.
新开发的低损耗、低介电常数的低温共烧陶瓷(LTCC)材料最适合做微波mcm的基板材料。
The newly developed low loss, low dielectric constant and low temperature co fired ceramics (LTCC) materials are the best substrate for microwave MCM technology.
新开发的低损耗、低介电常数的低温共烧陶瓷(LTCC)材料最适合做微波mcm的基板材料。
应用推荐