This model would be used in the design, simulation and optimization of the styrene polymerization process.
使用该模型可以对聚合工艺进行设计、模拟和优化，并将有助于聚苯乙烯树脂分子设计的探索。
Produced by emulsion polymerization in a similar way to styrene-butadiene rubber processes, yielding both "hot" and "cold" rubbers.
生产方法是乳液聚合，和苯乙烯-丁二烯橡胶的生产过程相似，得到“热”橡胶和“冷”橡胶。
The effect of THF on the kinetics of the anionic polymerization of styrene in Cyclohexane was studied.
本文研究了四氢呋哺对环已烷中苯乙烯阴离子聚合动力学的影响。
The polymerization kinetics of styrene catalyzed by Ziegler-Natta catalyst and the effects of prepolymerization conditions on morphology of prepolymer particles were systemically studied.
通过淤浆预聚对齐格勒·纳塔催化剂催化的苯乙烯预聚动力学规律和预聚条件对预聚物粒子形态的影响进行了系统的研究。
The new ligand 1,2-dipiperidinoethane (DPE) was designed and synthesized, and applied to atom transfer radical polymerization of styrene and methyl methacrylate monomers.
合成了1 ，2 -二哌啶乙烷，并将其应用于苯乙烯和甲基丙烯酸甲酯的原子转移自由基本体聚合。
Real time optimization system of process industry is built in this paper, and is applied to low-temperature styrene and butadiene emulsion polymerization.
本论文建立了过程工业的实时优化系统，并将其应用于低温乳聚丁苯橡胶装置。
MBS is graft polymers prepared by polymerization of MMA in presence of PBD-styrene rubber emulsion.
MBS是由丁苯橡胶与甲基丙烯酸甲酯经乳液聚合而得的接技聚合物。
Styrene-maleic anhydride random copolymer was prepared through solution polymerization and was characterized by IR, DSC and TGA. And the application of R-SMA in leather retanning was discussed.
采用溶液聚合法制备了苯乙烯- 马来酸酐无规共聚物，并用IR、DSC和TGA对产物进行了表征，论述了苯乙烯-马来酸酐无规共聚物在皮革复鞣中的应用。
A nonlinear internal model control (IMC) strategy based on radial basis function (RBF) network models was proposed for bulk polymerization of styrene.
文中研究基于径向基(RBF)神经网络算法的内模控制策略在苯乙烯本体聚合反应相对分子质量分布控制领域的应用。
Mathematical simulation has been performed by means of electronic computor for two types of ideal flow reactor systems used for the thermal bulk polymerization of styrene.
应用电子计算机对两种理想流动模型的苯乙烯本体热聚合反应器进行了初步数学模拟试验。
The research situation and the progress of continuous polymerization technology of home and abroad for high vinyl solution polymerized styrene butadiene rubber (SSBR) were reviewed in this paper.
综述了国内外高乙烯基连续溶聚丁苯橡胶(SSBR)的研究现状及其聚合技术进展。
These butyl radicals bring about a rapid polymerization of styrene.
这些丁基自由基促使苯乙烯聚合速度加快。
The aim of this paper is to build the steady state simulation platform of the low temperature styrene/butadiene emulsion polymerization unit.
本文的目的是建立起低温乳聚丁苯橡胶聚合单元的稳态模拟平台，并在此基础上对生产装置进行优化计算。
The Building coating was prepared with addition of a certain amount of organo-siloxane for copolymerization in the process of polymerization of styrene and acrylic emulsion.
在苯乙烯-丙烯酸乳液聚合过程中，加入一定量的有机硅氧烷进行共聚，制得建筑涂料。
Granular high oil-absorbing resin was prepared by free radical suspension polymerization process using 4-tert-butyl styrene as monomer.
以4 -叔丁基苯乙烯为单体，采用自由基悬浮聚合法合成了颗粒状高吸油树脂。
The effects of initiators and thermal initiation on a reaction rate, molecular weight and molecular weight distribution of products in a mass polymerization of styrene were investigated.
考察了热引发方式和不同种类、浓度下的引发剂引发方式在苯乙烯的本体聚合中对聚合反应速率和产品的分子量及其分子量分布的影响。
On the basis of the above bulk polymerization, further study on emulsifier-free emulsion polymerization of styrene with the presence of RAFT was made.
在前述本体聚合研究工作基础上，进一步研究了RAFT存在下苯乙烯无皂乳液聚合。
The results confirmed the distinct living polymerization character of the reaction system and showed that among the three obtained RAFT agents BDB was the best for styrene bulk polymerization system.
对聚合动力学和分子量的控制进行了研究。研究表明，此种苯乙烯本体聚合体系具有明显的活性自由基聚合特征。
The catalytic systems and polymerization mechanism of styrene syndiotactic polymerization were reviewed with 29 references.
对苯乙烯间规聚合的催化体系，聚合机理和研究现状等方面进行了较全面地综述。
Analysis of industrial styrene bulk polymerization processes was carried out.
对工业装置本体连续聚合过程进行了分析。
Styrene-glycidyl methacrylate copolymer (GMA) was synthesized by suspension polymerization, and the effect of various experimental factors on the polymerization were also studied.
采用悬浮聚合方法合成了苯乙烯-甲基丙烯酸缩水甘油酯（GMA）共聚物（SG） ，讨论了各种实验条件对聚合反应的影响。
The effects of impurities such as phenylethyne, polymer and methyl styrene on particle diameter of polystyrene manufactured by suspension polymerization were analyzed .
研究了苯乙烯中苯乙炔、聚合物和甲基苯乙烯三种杂质对悬浮法聚苯乙烯粒径的影响。
The activity of the complex as catalyst in ATRP was confirmed by polymerization of MMA and block copolymerization of styrene.
将该配合物作为催化剂成功地进行了MMA的A TRP反应，和苯乙烯的嵌段聚合，证实该化合物作为A TRP催化剂具有催化活性。
The corresponding polymer-incorporated zirconium catalyst 6 was obtained by the co-polymerization of the olefin group of catalyst 4 with styrene in the presence of a radical initiator.
在引发剂的作用下，配合物4和苯乙烯进行自由基共聚，得到高分子化催化剂6。
Two polymerization systems were studied, which were styrene(St)-M12 system and butyl acrylate(BA)-M12 system.
本文详细研究了苯乙烯—M12和丙烯酸丁酯—M12两个反应体系。
The research development in catalysts for Syndiotactic polymerization of styrene is re-viewed .
本文综述了制备间规聚苯乙烯用催化剂的研究进展。
The emulsifier-f ree emulsion polymerization of styrene in the presence of 18-crown-6 has been studied.
本文研究了在苯乙烯不外加乳化剂的乳液聚合体系中，加入王冠醚18-冠-6对聚合反应及其产物的影响。
The polymerization of the three monomers produces a terpolymer which has two phases: a continuous phase of styrene-acrylonitrile (SAN) and a dispersed phase of polybutadiene rubber.
三中单体的聚合产生了具有两相的三元共聚物，一个是苯乙烯-丙烯腈的连续相， 另一个是聚丁二烯橡胶分散相。
The polymerization follows the mechanism of butadiene-styrene emulsion polymerization, and the rate of reaction has nothing to do with the reaction time.
聚合基本规律遵守丁苯乳液聚合规律，聚合反应速率与反应时间无关。
The polymerization follows the mechanism of butadiene-styrene emulsion polymerization, and the rate of reaction has nothing to do with the reaction time.
聚合基本规律遵守丁苯乳液聚合规律，聚合反应速率与反应时间无关。
应用推荐