The results showed that the variation of the microstructure of melt will cause the change of physical properties sensitive to structure.
研究结果表明，熔体微观结构的变化将引起对结构敏感的物性发生改变。
Fresh snow can melt and re-freeze within the snow pack and it's this change of structure that can lead to an avalanche.
新下的雪可以在积雪中融化再凝固，这种结构上的变化会引起雪崩。
After simple introduction the advance in silicate structure research, the influences of components, temperature and pressure on melt structure are discussed in detail.
本文概括介绍了熔体结构的研究进展，着重讨论了熔体组分、温度及压力对熔体结构的影响。
The TPS materials with different glycerol contents were produced by melt blending method. The influences of the glycerol contents on the structure and properties were studied.
通过熔融共混的方法制得甘油含量不同的TPS样品，研究了甘油含量对材料的结构与性能产生的影响。
It is shown that the relative concentration of melt structure unit varies abruptly in some extent across the phase border.
熔体结构单元相对含量，在相界线两侧有某种程度的突变。
The liquid structure and melt treatment of M963 Ni base superalloy have been studied by using high temperature X-ray diffraction.
通过液态X射线衍射研究了铸态镍基高温合金M 963的液态结构和熔体处理。
Analyzing the die channel structure and the melt flow of the circle profile in the extrusion die provides the basis of the die design for the circle profile.
分析了模头流道结构和熔体在圆环型材挤出模中的流量，为环类型材挤出模设计提供了依据。
The molecular long chain branch structure of metallocene polyethylene has great effects on it's rheological behavior, long chain branch can significantly enhance melt elasticity and shear thinning.
茂金属聚乙烯的分子链长支化结构对其流变特性有重要影响，长支链可以使熔体弹性和剪切变稀效应明显增强。
The procedures are: learning about from the producer whether the structure of the thermo melt membrane is of single layer or multi layers.
其步骤包括：从生产商了解热熔膜的结构是单层相同材质还是多层不同材质。
The results show that IR radiation spectrum is also one of effective (methods) means of studying glass and melt structure. A new road is found for the structure study of glass, specially melt.
研究结果表明：红外辐射光谱同样是研究玻璃及其熔体结构的一种有效方法。
This paper has studied the relationship between the a-mount and schedule of carbon addition, carbon variety, melting rate, melting characteristic and melt structure.
本文研究了保护渣熔化速度、熔融特性和熔融结构与渣中配炭量、配炭种类和配炭方式的关系。
Sintering and melting of coal ash is a key process of ash deposition in furnace of utility boilers. Melt structure characteristics is a determining factor in deposit growth and strength development.
煤灰的烧结和熔融是电站锅炉灰沉积的重要过程，熔体的结构特性是沉积物生长和强度形成的决定性因素。
According to the structure of plastic parts and mold characteristics, the flow model of the plastic melt in the gating system based on the ANSYS was built and simulated.
根据塑件结构及其模具特点，基于ANSYS软件，建立并模拟了塑料熔体在浇注系统中的流动模型。
Ir radiation spectrum of the silicate glass and its melt were successfully obtained first and analyzed. The structure information of the glass and its melt was obtained by analyzing.
获得了硅酸盐玻璃及其熔体的红外辐射光谱，并对其进行了分析，得到了玻璃及其熔体的结构信息。
The lamellar structure of montmorillonite makes it possible to intercalate PA 6 into the nanocomposites under the action of mechanical force during the melt blending process.
蒙脱土特殊的层状结构使得利用熔融共混在机械力的作用下插层到纳米级复合材料成为可能。
All factors affecting the structure of PCN, the mechanism and some theoretical models of melt intercalation are introduced, and the thermodynamics and kinetics of melt intercalation are summarized.
介绍了影响PCN结构形态的几种因素；对熔融插层法制备pcn的热力学、动力学的研究进行了总结；介绍了熔融插层的机理和几种理论模型。
Technology transformation on the structure of urea melt tank and its effect are introduced. which results in a long-term production without breakdown.
介绍对尿素熔融槽结构技改的内容和效果，达到了长期无故障生产。
Truss is the main structural component, its standardization design and factory melt produce is very important, for the application of the staggered truss system in the residence steel structure.
桁架是交错桁架体系的主要构件，桁架的标准化设计、工厂化制作对推动交错桁架体系在我国钢结构住宅中的应用具有重要意义。
The affecting law of structure fluctuation and energy fluctuation on dendrite growth in pure undercooled melt was studied by simulation of a phase-field method.
采用捕获液态界面改进的相场方法，系统地研究了结构起伏、能量起伏对过冷纯金属熔体中树枝晶生长的影响规律。
The best technological parameters of laser surface melt casting were obtained through comprehensive analysis of structure and properties.
通过组织与性能的综合评价，得出了激光熔铸涂层的最佳工艺参数。
Treating aluminum melt with power ultrasonic can improve solidification structure and mechanical properties of metals obviously.
金属凝固过程中施加功率超声可以有效地改善铸锭凝固组织，提高材料特性和机械性能。
The melt-spinning technology does not change the crystal structure of the alloy.
快淬工艺不改变合金的晶体结构；
The structure of pipe is thin inner plastic layer and thick outer plastic layer, easy to join with hot-melt pipe fitting.
生产的管材结构为内塑层薄外塑层厚，以利于与热熔管件连接；
The pipeline has the advantages of reasonable structure, saving materials, solid welding by the melt adhesive, high ring stiffness, etc.
本发明具有结构合理、节省原料、熔胶焊接牢固、环刚度高等优点。
The hot-melt moisture cure PU adhesives have been prepared. The effects of the structure of the MDI-polyether prepolymer, tackify resins on peel strength of the adhesives have been studied.
本文制备湿固型MDI- 聚醚基聚氨酯热熔胶，研究了MDI-聚醚预聚物结构、增粘树脂等对胶粘剂剥离强度的影响。
According to the structure of plastic parts and mold characteristics, the flow model of the plastic melt in the gating system based on the ANSYS was built and simulated.
通过对塑料熔体在型腔中的流动性分析和模具温度控制方式的比较，确定了微结构塑件在注射过程中模具温度控制的优化方案。
According to the structure of plastic parts and mold characteristics, the flow model of the plastic melt in the gating system based on the ANSYS was built and simulated.
通过对塑料熔体在型腔中的流动性分析和模具温度控制方式的比较，确定了微结构塑件在注射过程中模具温度控制的优化方案。
应用推荐