Virginia Woolf consistently holds that forming process of the psychic time structure as from just the manifestation of psychic structure as content.
伍尔夫自始至终坚持作为形式的心理时间结构的形成过程，也即是作为内容的心理结构的显现过程。
Analyzed forming process of the fixed frame in automobile steering system, mainly introduced side hold punching die structure design.
分析了汽车转向系统中固定架的成形工艺，主要介绍了冲侧孔的模具结构设计。
The line heating, a very special technology in steel plate forming process, has a broad application in the shipyard to create cured surface of ship structure.
水火弯板是钢板无模成型工艺中一项极具特色的技术，目前广泛应用于造船生产中。
Forming a relatively stable structure of teaching process.
形成一个相对稳定的教学进程结构。
The forming technology of skin-cooling high pressure turbine was analyzed, introduced polyurethane bulging die structure design and the working process and die debugging improvement.
分析了高压涡轮冷却外壳的成形工艺，并介绍了聚氨酯胀形模的结构设计和模具工作过程以及模具调试改进。
Densely sintering of dolomite ore is difficult because decomposing of carbonate results in forming porous structure during calcining process.
由于白云石在煅烧过程中碳酸盐分解后形成多孔疏松结构，使其难以烧结致密。
The forming technology and parameters for hot forging of the brass brake shield, and the structure and the working process of the die were introduced.
介绍了黄铜闸板热锻成型工艺和参数，还介绍了模具结构及工作过程，提出了在热锻过程中应注意的几个问。
Through analyzing the forming process of the parts, a new_conception and practical compound forming die with simple structure for floating slides was introduced.
通过对工件的成形工艺分析，介绍一种构思新颖巧妙，结构简洁实用的浮动滑块复合成形模具设计。
The working process, structure and control system of a three-dimensional manipulating robot for cold extrusion forming of metal have been introduced.
介绍了用于金属冷挤压成形的三维操作机器人的工作过程、结构与控制系统。
Introduced forming process and die structure design of the support dish, putf orward the reasonable solution for the forming process arrangement and die design.
介绍了支承圆盘零件的成形工艺及模具结构设计，对工艺程序安排和模具结构设计提出了合理的解决措施。
The forming process of pressing for farm transporter frame is analysed, the die structure and its design process are introduced in detail.
对车架冲压件的成形工艺进行了分析，并详细介绍了模具结构及其设计过程。
Analyzed the forming process of the cover plate, introduced the layout design, and expound design and manufacture process of die structure and its main components.
分析了盖板零件的冲压成形工艺，介绍了零件排样设计方案，阐述了模具结构及其主要零件的设计和制造工艺。
An injection mould with half-parting inlaying structure was developed based on the analysis on forming process of wiring terminal positioning fixture with nine-thread pedestal.
通过对九线基座、接线柱定位夹具注射模镶件的工艺分析，确定了成型镶件分半镶拼式结构。
Through analysis on the structure of miner's lamp lens and problems in injection forming, an injection mould structure and its operating process were determined.
分析了矿灯透镜产品结构以及注射成型存在问题，确定了该类塑件的注射模结构以及模具工作过程。
Part I gives the forming process and structure for the pouring tire, part II is the forming equipment and property for pouring tire with polyurethane.
第一部分主要为聚氨酯浇注轮胎的成型工艺及结构特点，第二部分为聚氨酯浇注轮胎的成型设备及特点。
This paper introduces the structure of polymer molecule and the foaming plastics and analyzes the influence of molecule structure and dynamic forming factors on the foaming process.
介绍了高聚物的分子结构和塑料的发泡成型，从微观的角度分析了高聚物的分子结构及动态加工因素对发泡成型的影响。
Through analyzing copper bus-bar structure and forming process, designed a reasonable and highly effective bending die.
通过分析铜排结构及成形工艺，设计出了合理、高效的扭弯模具。
The forming process for the medical one_off plastic tweezers and the structure of the injection mould were introduced.
介绍了医用一次性塑料镊子的成型工艺及注射模结构，模具试模一次成功，成型塑件满足用户要。
Die structure was discussed through the analysis of forming process of high intension screw bolt and a set of hot upsetting tool was designed.
通过分析高强螺栓的成形工艺，对模具结构进行深入探讨，设计了一套热镦模。
According the laevorotatory helicoid structure characteristic of the stainless steel spiral plate, analyzed the forming process, and introduced forming die structure.
针对不锈钢螺旋板的左旋螺旋面结构特点，分析了成形工艺，并介绍了成形模具结构。
Based on the analytic results of the numerical simulation, the forming process and the mould structure for the spur-gear open-die forging were designed properly.
在数值模拟分析结果的基础上，对直齿轮的开放式成形工艺和模具结构进行了合理设计。
Analyzed the structure characteristics and forming process of the stiffening plate of front-carling. According to the spring-back problem, proposed the rectification method.
分析了前纵梁后加强板的结构特点和成形工艺，针对回弹问题，提出了整改方法。
Acrroding to the characteristics of complex structure of the lock with each other piece of gear-box, analyzed the forming process project, introduced the typical die structures in forming process.
针对变速箱互锁块结构复杂的特点，分析了成形工艺方案，介绍了成形过程中比较典型的模具结构。
According to the push-iron structure of die for the sheet metal product, introduced the forming process and the typical die design method, and the working principle was introduced, too.
针对常见板金产品模具中的推平结构，介绍了其成形工艺及模具典型结构设计方法，并介绍了模具工作过程。
The whole structure and working process of the die were stated, and the main points for die design and manufacturing were listed to obtain high forming quality.
阐述了异形垫圈冲裁成形复合模具的整体结构及其工作过程，为保证异形垫圈冲裁成形的质量，指出了复合模具设计和加工应注意的要点。
The forming process and active mechanism of the Generalized-Gradient theory can be simplified as it's of the duality structure from high gradient to low gradient in space.
广义梯度推移过程及其作用机理可简约为“高梯度—低梯度二元空间结构”的形成、作用机理及其演化过程。
Some viewpoints on the forming and growing of the inactive layer and the influence of the inactive layer structure on the oxide process are given out in the paper.
并对钝化层的形成和生长，以及钝化层结构对氧化过程的影响等问题提出了自己的看法。
Moulds of each process is designed in light of the process optimized, and introducing the mould structure of the forming mould and side punch mould for trimming, and the design of key pieces.
根据所确定的工艺方案对各工序模具进行设计，并介绍了成形模和修边侧冲孔模的模具结构以及关键零件的设计。
A forming method and its characteristics for a certain model of air-conditioner plate are introduced, as well as, die structure of each procedure and forming process are briefly stated.
介绍了某款空调后背一种成形工艺方法及特点，并对每道工序的模具结构、成形工艺进行了简要阐述。
The structure design of cylindrical tank with hand lay-up process were introduced, the improved method of liner forming process were provided.
本文介绍了手糊成型玻璃钢圆柱形容器的结构设计，并对内衬层成型工艺提出了改进方法。
应用推荐