In this paper, the method of weighted residual is applied to the structural plastic limit analysis.
本文将加权残数法应用于结构的塑性极限分析。
Effects of rotation speed on the impact process and results are pointed out by the analysis of structural plastic dynamic response and blade deformation.
通过对结构塑性动力学响应和叶片变形过程的分析，指出了叶片断裂时的不同转速对撞击过程及结果的影响。
In this paper, the method of singularity function is applied to the structural plastic limit analysis, and simplified the calculation of limit loads of some annular plates of fixed supports.
本文将奇异函数法应用于结构的塑性极限分析，简化计算某些固支环形板的极限荷载。
MFS II was assembled for the Biennale by four builders in just 10 days – using one tonne of metal and 13.5 tonnes of wood for the structural framework, and 256 plastic barrels as a floatation device.
威尼斯双年展的MFSII在短短10天内由四名工人组装起来——结构框架使用了1吨金属和13.5吨的木材，256个塑料桶作为漂浮装置。
This paper introduces the design principles of keyslot and hub of plastic gear and common methods of structural design.
介绍塑料齿轮键槽和轮毂的设计原则，以及常见的结构设计方法。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
Using of fibre reinforced plastic (FRP) composite materials for strengthening and repair of structural members is a new technique.
纤维增强塑料(FRP)复合材料用于结构构件的加固、修补是一项新技术。
Structural type, design and calculation method of cellular voided flat slab with plastic boxes embedded in a underground garage were presented, calculating method of the deflection was proposed.
结合已建成的工程实例介绍了使用薄壁塑料盒作为填充体的蜂窝式空心无梁楼盖的结构型式及其设计计算方法，并提出了该类空心无梁楼盖板的挠度计算方法。
Analysis of synthesis of response presented at the end of the paper reveal two modes of structural responses: 1 contact plastic shakedown and 2 progressive failure.
文末对结构整体的载荷-位移行为的分析，揭示了周期载荷作用下的两种结构响应模式：1接触塑性安定；2增量破坏。
An advanced design platform of integration of structural variation and simulation analysis was developed. It was applied in the design of precision plastic injection molding equipment.
开发了集成结构变异与仿真分析的先进设计平台，并在精密塑料注射成型装备的设计开发中得到应用。
It is a problem demanding prompt solution to find out a method which is available for measuring structural strength and stableness oi a plastic film greenhouse.
为建立一种切实可行的测试方法，对塑料大棚结构强度、稳定性进行测试，这是当前生产上亟待解决的问题。
Plastic parts and then by analyzing the quality and appearance of the appearance of the structural characteristics of the die structure design.
在此之后，根据分析的精度和要求的外观和结构的产品，注塑模具的设计。
The resistance of metal plastic forming was introduced in this paper. The resistance forming could be divided into back pressure resistance forming and structural resistance forming.
综述了金属塑性成形中的阻尼，将阻尼成形分为背压阻尼成形和结构阻尼成形。
This paper presents the structural style of plastic-iron slideways applied for CNC machine tools and the process for sticking TSF model plastic-iron slideway.
介绍了财塑导轨应用于数控机床上的结构形式和TS F型贴塑导轨软带的粘接操作工艺。
We could produce plate for structural use, Welded structural use, Building use, Machine structural use and plastic die mold use.
我们可制造结构用钢板、焊接结构用钢板、建筑结构用钢板、机械结构用钢板、以及塑胶模具用钢板。
The structural analytical method of elastic-plastic earthquake responses can be separated into macroscopic method and microscopic method.
对于钢筋混凝土结构的弹塑性地震反应分析方法可以分为微观方法和宏观方法。
The design is a plastic mould design of the back over of mobile, which analysis part structural with ABS as the material of plastic part.
本设计是手机后盖塑料模具的设计，对零件结构进行了工艺分析，采用ABS作为塑件的材料。
The result showed that the wood-plastic structural planks with higher density have a better reliability than that with lower density.
结果表明：密度大的木塑结构板材可靠性较高，而密度小的木塑结构板材可靠性较低。
Have good mechanical strength, weather resistance and fire resistance, can be used in structural materials alone, be used in the manufacture of chemical piping, sheet metal and plastic products.
具有良好的机械强度、耐候性和耐燃性，可以单独用做结构材料，应用于化工上制造管道、板材及注塑制品。
It introduces the design thoughts and the structural feature of the super-thin plastic-mold for insulation spacer and some problems which should be pay attention to during manufacturing.
介绍了超薄塑件成型模具的设计思路，模具的结构特点，以及模具在加工过程应注意的问题。
Design principle of Obturation mechanism in high pressure is to avoid structural component from plastic deformation.
高膛压闭气机构的设计原则是避免构件发生塑性变形。
Structural retrofit and rehabilitation with Carbon Fiber Reinforced Plastic(CFRP) is a very hot strengthening technique which has a great market in highway bridges, but it is still in unformed phase.
碳纤维复合材料（CFRP）加固是当前最为引人关注且具有广泛应用前景的桥梁加固技术，但仍处于研究阶段。
The structure of tower body adopts structural steel frame, its curb plate is fiberglass reinforced plastic structure.
塔体结构采用钢结构框架结构，塔体围护板为玻璃钢结构。
In the structural mechanical analysis, previous research is more to establish elastic or elastic-plastic model to study the grid reinforced effect on pavement stress and deflection.
在结构力学分析方面，以往的研究多是建立弹性或者弹塑性模型来研究格栅对沥青路面应力及弯沉的影响。
Suitable for glass, aluminum material, stone, concrete, brick, ceramic, plastic, non-structural bonding and sealing.
适合于玻璃，铝材，石材，混凝土，砖瓦，陶瓷，塑料间的非结构性粘结密封。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
应用有限条方法分析多格式斜桥，编制了相应的计算程序，进行有机玻璃模型试验，讨论了这种结构受力性能。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
应用有限条方法分析多格式斜桥，编制了相应的计算程序，进行有机玻璃模型试验，讨论了这种结构受力性能。
应用推荐