Mesh and pads are made of hexagonal wire mesh surface with high strength and flexibility, can accept or absorbed by soil and water stress occurred.
格宾网和护垫是用具有高强度和柔韧性的六边形钢丝网面制成，可大大接受或吸收由土壤和流水发生的力。
In this paper, bond and anchorage stress conditions between concrete and high-strength smooth wire for pre-tensioned concrete members are discussed.
本文讨论和分析了在先张预应力混凝土构件中混凝土和光面高强钢丝之间的握裹和锚固应力的情况。
When the elevator hoists up, certainly must guarantee in the rope tube to retain 3 at least the steel wire, prevents the steel wire stress to fall off oversized from the rope tube.
在提升机起吊时，一定要确保绳筒上至少保留3圈钢丝绳，防止钢丝绳受力过大从绳筒上脱落。
In many practical measurings of the blast stress wave parameters in rock mass by variable capacity instrument, long wire effect has been discovered.
在变电容仪测量岩体爆炸应力波参量的多次实践中，发现存在着长线效应。
The stress characteristic of the main working methods for processing the special-shaped wire, such as drawing, driven roller die and rolling was analyzed.
针对异型材的几种常用加工方法，如拉伸、辊拉、轧制等，分析它们在加工中的应力特点。
The result shows that the plastic strain at the heel region induced by wire bonding process, molding process and the thermal stress and strain in solder reflow are the main causes of heel crack.
结果显示由于引线键合工艺、注塑工艺以及回流焊中封装体各部分不同的热膨胀系数引起的热应力和塑性变形是产生引脚跟断裂的主要因素。
Prestressed steel wire and strand for bridge are used in the condition of high alternating stress with humidity atmosphere and sometime seawater atmosphere, which speed up the corrosion.
桥梁用预应力钢丝钢绞线都在高的交变应力状态下服役，加上海水、潮湿环境的影响，更加速其应力腐蚀的速率。
A new type structure of wire wound super-high pressure vessel was presented. By the analysis of new type wire wound force state, it formularizes the stress calculation.
提出了一种新型绕丝式超高压容器的结构，并对其进行了应力状况分析，推导出了绕丝层的应力计算公式。
Simulation results show that free surfaces of nano wire lead to initial stress without external load, and damage expands from outmost surfaces deep into interior lattices.
模拟表明纳米金属丝在无外载荷状态存在本征应力，原子缺陷从自由表面开始向内部扩展。
Residual stress is produced inevitably in steel wire in the course of drawing, which may affect products quality as the stress is strong.
钢丝在拉拔过程中不可避免地会产生残余应力，严重时会影响产品的质量。
The stress impedance (SI) effect in Co based amorphous wire is studied.
研究了钴基非晶丝材料显示的应力电阻抗（SI）效应。
The aim of steel wire straightening is to maximally eliminate steel wire's extra internal stress caused by uneven deformation or uneven temperature distribution in production.
钢丝矫直的目的是最大限度地消除钢丝生产过程中由于变形或温度分布不均造成附加内应力。
The stress corrosion of cold drawn prestressed steel wire hasn't been paid full attention to for a long time.
长期以来，冷拉预应力钢丝的应力腐蚀问题并未引起人们的足够重视。
Transverse pre-stress steel wire is set in order to advance the transverse rigidity of the deck and improve the stressed state of the cellular slab and the deck.
利用设置桥面横向预应力的技术，增强桥面的横向联结刚度，改善空心板梁与桥面板的共同受力性能。
The bending stress and the stress increment of uneven loaded wire stress above the average stress are taken as secondary stress in the thesis.
本文研究的次应力包括主缆局部弯曲应力和超出平均应力的钢丝不均匀应力增量。
The temperature field, stress field and strain field of 304 stainless steel wire and rod during 18 passes hot continuous rolling process were calculated.
对304不锈钢棒线材18道次热连轧过程的温度场、应力场及应变场进行了数值模拟。
Objective: To discuss a method about shaping a dynamic and visualizational color stress cloud chart of finite element model of Ni-Ti arch wire for orthodontics.
目的：探讨形成镍钛弓丝有限元模型动态可视化应力云图的方法。
The axial force toward the side board is always produced when the wire rope reaches the new layer. It makes the side board bended and causes very large stress between the side board and the roller.
钢丝绳向新的一层过渡时，对端侧板产生轴向推力，导致侧板弯曲，同时在侧板与筒壁过渡处产生较大应力。
The pre-tensile stress in wire layer of new type wire wound super high pressure vessel was analyzed, and yielding stress calculation of the wire layer was been formularized.
提出了一种新型绕丝式超高压容器的结构，并对其进行了应力状况分析，推导出了绕丝层的应力计算公式。
This article introduced the matching selection of step motor for wire-cut electric discharge machine by analyzing the special stress of the machine.
通过对电火花线切割机床在加工过程中的特殊受力分析，给出步进电机的匹配选择方法。
An algorithm to calculate the dynamical stress of loose lashing wire grouped blade with transient dynamical analysis method is proposed.
提出了采用瞬态动力分析计算松拉金成组叶片动应力的方法。
This paper states of the development and application prospect of high-strength concrete and wire, strand and pre-stress technology in the field of bridge engineering .
预应力技术在桥梁工程中的应用很多，随着高速公路的大规模建设，出现的质量问题和裂缝病害也不断增多。
The string wire stress gauges were used in the field service.
现场实测采用钢弦式钢筋应力计。
Elastic dynamics method predicts that stress wave has remarkable effects on dynamic buckling of the nano crystal copper wire. Comparison with molecular dynamics resu...
用弹性动力学理论分析了应力波传播对纳米铜线的动力屈曲的影响，并与分子动力学模拟的结果进行了比较。
Elastic dynamics method predicts that stress wave has remarkable effects on dynamic buckling of the nano crystal copper wire. Comparison with molecular dynamic...
用弹性动力学理论分析了应力波传播对纳米铜线的动力屈曲的影响，并与分子动力学模拟的结果进行了比较。
Method and results of an experimental study on the stress Corrosion of mooring wire-rope in seawater under laboratory condition are highlighted in this paper. The experiment lasted one and half years.
本文介绍了长达一年半之久的水下系留铜丝绳在实验室海水中的应力腐蚀试验及其结果。
Moreover, due to increasing the welding combination area and effectively transferring a weak stress surface, the connection safety of the guide wire is increased.
并且，由于增加了焊接结合面积并有效转移了薄弱受力面，使导丝连接安全性得到提高。
After the steel wire, the suspension design, improved the bracket stress condition, the steel wire has taken in and put away is convenient, is safe;
钢丝绳后挂式设计，改善了悬臂受力状况，钢丝绳收放方便、安全；
This study focuses on the dynamic buckling of a nano crystal copper wire under compression stress wave.
用分子动力学方法和弹性动力学方法研究了纳米铜线的动力屈曲，并对两种方法进行了比较。
This study focuses on the dynamic buckling of a nano crystal copper wire under compression stress wave.
用分子动力学方法和弹性动力学方法研究了纳米铜线的动力屈曲，并对两种方法进行了比较。
应用推荐