This paper introduces a mathematical model of terrestrial stress profile and its application.
本文介绍了地应力数学模型及其适用条件。
The interaction of temperature gradient with internal stress profile would result in time-varying velocity shift.
随时间变化的温度梯度与金属内部应力区的相互作用会导致超声速产生一种明显的变化。
Residual stress profile state and surface roughness are the two important parameters for evaluating machined surface layer quality.
残余应力分布状态及表面租糙度是评定加工表面层质量的两个重要参数。
It has been showed by practice in Anpeng oilfield that, the earth stress profile and plane distribution of earth stress in the same reservoir...
安棚油田的实践表明,利用该方法求得的地应力剖面资料和同一储层地应力平面分布资料较为准确、可靠,具有一定的推广应用价值。
In order to effectively determine the residual-stress profile of an aluminum alloy, the measuring method was studied by the laser ultrasonic technique.
为了有效检测铝合金材料上的残余应力分布,研究了用激光超声技术来检测铝合金材料上的残余应力分布的方法。
Using well log data to analyze earth stress is not only to quickly get the stress profile spreading along the depth, but also to save high cost for measurement.
测井分析地应力不仅可以方便、迅速得到沿深度连续分布的地应力剖面,而且节约了昂贵的地应力测试费用,具有明显的经济意义和实用价值。
A silicon piezoresistive sensor is applied here to in-situ record the curing stress profile, the distributions of the residual stress and the stress evolution profile during thermal treatment.
利用硅压阻传感器实时原位地记录粘接剂固化过程中的应力变化和残余应力的分布状况,以及在热处理过程中应力的演化过程。
In this paper an numerical analysis is made through computer data simulation to infer the residual stress profile by using temperature gradient and ultra-sound. A valid numerical algorithm fo...
本文利用计算机模拟数据对超声波和温度梯度进行金属内部应力推断做了数值分析并引入了一种有效的提取应力信息的反演算法同时也给出了数值分析的初步结果。
When the bridging load, the total external load, the bridging stress and the bridging stress intensity factors are jointly solved, a complete bridging profile is described.
当桥联载荷、总体外载荷、桥联应力和桥联应力强度因子之间的关系联合求解时,描述了一个完全的桥联轮廓。
Based upon the results of stress experiments, the effect of the change of dimension of the profile on the stress distribution has been studied.
根据不同轮廓尺寸剖面应力试验的结果,分析了各种轮廓尺寸的变化对坝体应力分布的影响。
A method of reliability testing profile design combining measured stress with reference stress is introduced.
介绍了一种将实测应力和参考应力相结合设计可靠性试验剖面的方法。
The increasing rate of borehole stress and profile strain peak value of cement mortar model are calculated.
还计算了水泥砂浆模型孔壁应力和模型侧面应变在孔壁不同方向的应力、应变峰值增大率。
Result Asymmetric inlet velocity profile deflexion could increase the area of low shear stress and the gradient of shear stress.
结论不对称入口速度剖面可能是诱发动脉粥样硬化发生的一个危险因子。
Optimum profile, shape and thickness difference of strip can be obtained by means of changing stress distribution of load on the surface of strip.
通过改变轧辊、板带表面的应力分布,来得到理想的带材凸度、板形和厚差。
The common background method dealing with the background of diffraction profile was presented to increase the efficiency of X-ray stress measurement.
为了提高X射线应力分析的效率,提出了公用背底法对衍射线进行背底扣除。
Through the calculation of the finite element method(FEM) models for double circular arc profile spiral bevel gear, the stress changing pattern along the length of the tooth is obtained.
用有限元方法,对双圆弧弧齿锥齿轮沿齿长方向齿根应力进行了计算。通过应力计算结果的分析,得出了凸、凹两齿侧应力沿齿长的分布规律。
The improvement of the design facilitate the insertion of the nail, decrease the stress to the lateral wall, low profile nail end and end cap reduce soft tissue irritation.
由于设计改进,使得髓内钉插钉更容易,对外侧壁应力减小,同时钉尾和尾帽切迹变低,减少了软组织刺激。
In recent years a number of basic and clinical studies have provided evidence that low or turbulent wall shear stress promotes an atherogenic endothelial gene profile.
最近几年,大量的基础和临床研究都证实低的或者很高的内皮剪切力加速改变一个致动脉粥样硬化内皮基因型。
The second step is taking the mass of wheel as target function. The stress, radial and cross displacement of wheel as restrain function, the spoke profile of wheel as design variable.
第二步是以车轮的质量为目标函数,以车轮的应力、径向及横向位移为约束函数,以车轮辐板形状为设计变量进行设计。
The profile, internal stress, cold - bending cracks and surface flaws of the hot strip have been analyzed, and the corresponding strategics and resolutions are also preferred, In order to improve the.
从宽带钢板形、内应力、冷弯裂纹及板带表面缺陷等几个方面进行了分析,并提出了相应的对策和解决办法。
Then the profile of etching front is studied and the forming factors of the triangle at etching front are analyzed. The results show that the major factor of the triangle formation is stress.
提出了应力是产生腐蚀前端三角形的主要原因的推测,并通过退火实验验证了这一推测。
It is shown that the shear strength of joint is concerned with normal stress and weighted average of mean profile angles of joint surface.
说明节理的抗剪强度与法向应力和节理表面形貌特征参数有关。
The paper mainly analyses the chain track sectional profile of non chain drive mechanism of an importing miming machine and researches on its stress state deeply.
本文着重对引进采煤机无链牵引机构的链轨截面轮廓进行分析,并对其受力进行较深入的研究。
The earth pressures near the wall-plate, rear reinforced body and horizontal profile, the compression stress of the bottom, etc. are measured.
测试格栅加筋土挡墙面板后的土压力、加筋体后土压力、加筋土各分层土压力及地基应力等。
The temperature stress of I-profile short axially-restricted column is studied, a regression formula of temperature stress is proposed, and it agrees well with the experimental results.
对两端固定的工字钢短柱的温度应力进行试验研究,给出的温度应力估算公式与试验结果符合性较好。研究结果表明火灾中钢构件内力分析时,可把构件视为理想的弹塑性体;
Copper - Hemolysis, jaundice, changes in lipid profile, oxidative stress, renal dysfunction and even death.
铜元素——可能导致溶血症,黄疸,血脂病变,加速氧化衰老,肾功能障碍甚至死亡。
Copper - Hemolysis, jaundice, changes in lipid profile, oxidative stress, renal dysfunction and even death.
铜元素——可能导致溶血症,黄疸,血脂病变,加速氧化衰老,肾功能障碍甚至死亡。
应用推荐