The machine is the adopts low compressive stress electric current and singlechip to control hot-cement and folding, the whole process realizes intelligence.
该机是由低压电流、单片机控制，良好的机械工艺相结合，使整个作业过程实现智能化。
Objective To study the effect of transcutaneous electric nerve stimulation for decreasing stress response and strengthening the anesthetic effect in the operation of thyroid tumors.
目的：探讨经皮穴位电刺激在颈部甲状腺肿瘤手术中减弱应激反应及增强麻醉作用的效果。
In this paper, an electric device is proposed to measure contact stress on the sealing surface of sealing elements.
介绍了西北工业大学研制的密封面接触应力的电测装置。
Besides, a high temperature stress measurement experiment was conducted at the nozzle zones by using the electric measurement method to verify the calculation correctness.
为了验证计算方法的正确性，还在接管部位用电测法进行了高温应力测定试验。
Finite element method is used to study stress and place moving field inside the structure and electric measure method is utilized to verify the result of calculation.
利用有限元方法对该结构内部的应力场和位移场进行了研究。
During experiments of lower hybrid wave current drive, the change of LHW drive power will be accompanied by the change of the edge electric field, poloidal rotation velocity and Reynolds stress.
在低杂波注入实验中，改变低杂波驱动功率，从而改变边缘电场、等离子体旋转速度和边缘静电雷诺胁强。
Using proline content, MDA content and electric conductivity as physiological indexes, the waterlogging tolerance of 10 tree species were compared under waterlogging stress.
以游离脯氨酸和丙二醛(MDA)含量及相对电导率为指标，比较了水淹条件下10个树种的耐水淹能力。
The response of complex fluids when subjected to external perturbations, such as electric or magnetic field, thermo-field, or stress field, is extremely complicated, yet there are some novel features.
在外场(电场、磁场、温度场、应力场等)作用下，复杂流体的行为相当复杂，呈现出一些新的响应行为和现象。
Based on creeping flow approximation, electric stress acting on bubble with different dielectric permittivity is analyzed and calculated in this paper.
本文在蠕动流近似的基础上分析计算了具有不同介电常数工质的气泡在外电场力作用下的受力状况。
The threshold voltage and the peak of proportional difference for MOSFET devices will change after the uniform high electric field stress.
在均匀的高电场应力下，MOSFET器件的阈值电压和输出特性的比例差分峰值会有所改变。
Except that, stress and electric field concentrations at the boundary of matrix and inclusion are also studied.
另外，本文也研究了在夹杂与基体交界面处的应力集中和电场集中。
The three-dimensional exact solutions of the displacement, electric potential, magnetic potential, stress, electric displacement and magnetic induction of equilibrium problems are also obtained.
并得到了平衡问题的扇形板和扇形环板在两种边界条件下的位移、电势和磁势，应力、电位移和磁感应强度的三维精确解。
Numeral results show that, under shear loading conditions, the stress intensity factor is independent of applied electric displacement and electric field.
结果表明，在外加剪切荷载的作用下，应力强度因子与外加电场无关。
Finally, the relations between electric displacement intensity factors and stress intensity factors at crack tips can be obtained.
最后，电位移强度因子和裂纹尖端的应力强度因子之间的关系可以得到。
The device comprises the electric vibration table, a dynamic stress measuring system and a vibration controller.
该装置包括电动振动台，动应力测量系统及振动控制仪。
In this paper, the problem of electromagnetic stress tensor of the oblate spheroidal conductor in an electric field is studied.
本文研究电、磁场作用于扁球导体、磁导体上的力矩。
As a new technology, acoustic and electric imaging well logging can be applied to formation fracture identification, ground stress analysis and structure identification, etc.
声电成像测井作为测井新技术，可以应用于地层裂缝识别、地应力分析、构造识别等方面。
Environmental effect of city underlying cohesive soil can be summed up stress field effect, groundwater chemistry effect, thermal effect, electric effect, etc.
城市环境下粘性土环境效应通常可归纳为应力场效应、地下水水化学效应、热效应、电效应等方面。
The electromagnetic force acting on the crack in a metal is studied by numerical simulation method. The distributions of electric current, magnetic field and the electromagnetic stress are given.
用数值模拟方法研究了金属裂纹尖端电磁应力的分布情况，给出了电流分布、磁场分布和电磁应力的分布。
The result can be used in further study about the yield-stress and critical electric field strength.
分析结果可作为进一步讨论电流变液屈服应力以及临界电场强度的基础。
The treatment method for stress suspended conductor in static electric field and its application in stress distribution calculation of MOA is presented.
介绍了静电场中电位悬浮导体的处理方法以及它们在氧化锌避雷器电位分布计算中的应用情况，并分析了各种方法的优劣。
The stress distribution of a curved pipe with an initial elliptic cross section under internal pressure was studied by using electric resistance strain method.
采用电阻应变测量技术研究了带有初始随圆度的弯管在纯内压作用下的应力分布。
The cube BN grinding wheel was adopted to grind electric ceramic insulator, and the residual stress of insulators was analysed by the X-ray diffraction (XRD) technique.
采用立方氮化硼砂轮磨削电瓷瓷套表面，用X射线衍射法(XRD)分析了其表面所产生的残余应力。
This article introduced the matching selection of step motor for wire-cut electric discharge machine by analyzing the special stress of the machine.
通过对电火花线切割机床在加工过程中的特殊受力分析，给出步进电机的匹配选择方法。
But the electric resistivity changed little when the tensile stress changed for the resin composites filled with single direction continual carbon fibers.
但单向连续碳纤复合材料的纵向电阻率随应力的增加变化不大。
The scan electric current decrease the tensile stress in the nano-beams, so the electric resistance increase with the scan electric current times.
在纳米梁电学测试中，反复扫描电流产生的热会减小梁上张应力，从而使电阻随扫描次数增大。
The test results show that the electric resistance of Al nano-beams with tensile stress is instability.
电学测试结果表明：张应力下金属纳米梁的电阻值不稳定。
The electric spark build-up welding technology features less heat input and negligible residual stress etc., which is non - replaceable in the welding of special key components.
电火花堆焊工艺具有热输入量小、残余应力可忽略不计等显著特点，在特殊关键部件焊接中有不可替代性。
This software package can calculate electric field in different stress cone shape by finite element method, and can present following functions: drawing equipotential line;
开发的软件包对不同的应力锥形状下的场强采用有限元方法进行计算并提供以下功能：画出任意电位的等位线；
This software package can calculate electric field in different stress cone shape by finite element method, and can present following functions: drawing equipotential line;
开发的软件包对不同的应力锥形状下的场强采用有限元方法进行计算并提供以下功能：画出任意电位的等位线；
应用推荐