This allows the authors to offer the parameters and the stress distributions o…
据此，作者还给出了表征该种轴承接触区的一些参数和接触区的应力分布。
Stress distributions in particle filled composite are studied by finite element method.
本文采用有限元分析方法，对颗粒填充复合材料进行了受力分析。
Objective To investigate the displacements and the stress distributions of a mandibular second molar.
目的了解下颌第二恒磨牙不同载荷下近中移动时的位移及应力分布情况。
The results show that the stress distributions in roots of the bevel gear are different under respective loads.
光弹性试验结果表明锥齿轮在两种载荷分别作用下，齿根应力分布是不同的。
The stress distributions in U-shape bellows subjected to internal pressure and displacement are also given here.
同时还给出了通过有限元分析得出的膨胀节在受内压和轴向位移作用时的应力分布规律。
The microscopic fracture mechanism revealed by these stress distributions coincides with experimental observations.
由计算的应力应变分布形态所展示的亚微观断裂性质与实验观察相符。
With FEA based quenched stress, different stress distributions were obtained under different conditions of pre-stretching.
在获得淬火残余应力的基础上，模拟了不同预拉伸量对毛坯的淬火残余应力的消除。
Stress distributions on the 1000mm fir tree blade root and the rim are studied through finite element method and photoelastic method.
本文介绍了用有限元和光测弹性方法，研究1米长叶片枞树型叶根和轮缘的应力分布。
The stress distributions in various cross-sections are determined and the influence of assembling stress on the structure is also given.
本实验选用了七个截面，布片较多，测出了不同截面的应力分布规律。同时，测出了装配应力对结构的影响。
This paper analyses three-dimensional stress distributions of the stud anchor chain by the theory of finite element and boundary element.
本文应用三维边界元法和三维有限元法对有挡锚链进行了三维应力分析，并将其结果与电测实验数据作了比较，吻合得很好。
For MSCL and MHWH, the setting up of expansion joint and anti-thrust ring will not much affect the stress distributions of SC and surrounding concrete.
无论是对于垫层方案或是保压方案，是否设置伸缩节和止推环对蜗壳应力状态影响均较小。
With the elastic plate theory, the stress distributions of plate in the various control boundaries are calculated and it is found that intensity of wei.
运用弹性薄板理论，计算出不同约束边界条件下薄板内部的应力分布，论证了工作面中部来压强度大于头、尾部。
For test specimens built up symmetrically from 16 layers of fiber reinforced material the stress distributions are calculated under axial and thermal loads.
本文对用16层纤维增强材料对称铺设成的试样，在轴向载荷和热载下的应力分布作了计算。
The FSW process results in different microstructures and stress distributions at different weld zones, which exhibit different corrosion behaviors correspondingly.
其工艺特性导致各焊缝微区组织和应力状况不同，从而展现出不同的腐蚀行为。
For accurately obtaining the stress distributions of large oil storage tanks shell, an analytical method for solving the long-short cylindrical shells was proposed.
为准确获得大型石油储罐的壁板应力分布，提出了一种长-短圆柱壳解析方法。
Finally, for an example, a maximum stress point and stress distributions of a synchronous belt tooth have been found out and compared with its elastic linear solution.
最后，通过一个具体算例求出梯形齿同步带一个齿上的最大应力点及应力分布规律并与弹性平面问题的解进行了比较。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
Analytic solutions of temperature and stress distributions in condition of CW and pulse pumping are given. We have analyzed and discussed the thermal distortion in the slab.
给出了板状介质在重复率泵浦和连续泵浦情况下的温度分布和应力状态的解析解，对板的热效应进行了分析与讨论。
As numerical examples, the response histories and shear stress distributions of two kind of orthotropic thick_walled cylinder under different torsion loads are investigated.
在实例计算中，求解了正交各向异性厚壁圆筒在不同的扭转载荷作用下，两种厚壁结构的剪应力响应历程和分布规律。
Verification calculation of transient temperature and stress distributions were performed with the finite difference method, and the results coincided with the measurements.
并用有限差分法对瞬态温度场与热应力进行了校核计算，其结果与实测完全吻合。
Under the width to thickness ratio 625 of strip, this paper studies the 3-dimensional stress distributions of cold strip rolling by cubic spline function finite strip method.
本文在轧件宽厚比为625的条件下，用三次样条函数有限条法研究了冷轧带材三维应力的分布问题。
The effect of bond length on bond performance is examined. The failure mode, the FRP strain and bond stress distributions, and the local bond -slip relationship are all discussed.
根据实测应变分布，得到沿粘结长度界面粘结应力分布，并通过计算分析，对局部粘结滑移关系进行了初步探讨。
Explosive lining process is numerically simulated by DYNA-2D finite element program, and the time history of stress distributions in the fluid mortar during explosive lining is analyzed.
应用dyna - 2d有限元程序，对爆炸衬砌过程中流态砂浆内的应力变化进行了数值模拟研究。
Analytical solution was given for rule of rock displacement and stress distributions and forming and developing of the crack in interface layer. A condition of earthquake occurring was...
分析了岩体的位移和应力分布规律，得到了层间裂纹产生及其扩展规律，建立了地震发生的条件，提出了一种预报地震的方法。
Then it is used to solve the flow of PAM solution in a circular tube. The velocity and stress distributions obtained can be used for the three dimension numerical simulation in the future.
然后用拟谱法求解PAM水溶液在圆管中流动，得到速度分布、应力分布，为三维模拟作准备。
In this paper, fracture mechanism, position and direction of crack initiation of mixed mode fracture in several ductile materials are tested, and stress distributions of which are analyzed.
应用传统强度理论和细观力学方法对几种韧性材料在复合载荷条件下的断裂机理、启裂位置、开裂方向进行了实验分析和应力场计算。
Distributions of stress and particle velocity in the elastic unloading region behind the plastic shock wave are given as well.
同时给出了塑性激波后方弹性卸载区内的应力和质点速度分布规律。
Under the situations of different time and water's locations, the distributions of the stress and displacement of various places are presented.
给出了闸墩各部位在不同时间、水温和水位情况下的应力和位移分布。
The stress and displacement distributions of the bellows under torsion loading are investigated by using both finite element method (FEM) and equivalent cylinder method.
本论文分别采用有限元法和等效圆筒法对波纹管在扭转载荷作用下的应力分布和位移变化情况进行了计算。
Firstly, Airy stress function and the distributions of the membrane forces are determined by the combination of double cosine series.
首先采用双重余弦函数的组合确定了面内冲击矩形薄板的艾雷应力函数和中面力的分布；
应用推荐