Elasticity is the most solid materials in low-stress deformation demonstrated by a mechanical behavior.
弹性，是大多数固体材料在低应力作用变形时表现出来的一种力学行为。
On the basis of the statistical theory of cross linked rubber, this paper analyses the non linear stress deformation characteristics of elastic waterproof materials.
依据交联橡胶的统计理论，讨论了弹性密封防水材料的非线性应力、应变特性。
The article introduces several structural models, as well as analyzes the stress deformation feature of concrete face rockfill dam using two dimension finite element method.
介绍堆石体的几种本构模型，用二维有限元方法分析了混凝土面板堆石坝的应力变形特性。
The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions.
分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析；
Controlling on grid welding deformation and welding stress are the key problems for assuring grid quality.
控制网架的焊接变形与焊接应力是保证网架质量的关键之一。
But because of their poor rigidity, it is easy to bring machining deformation caused by the existence of the residual stress and the fixing stress.
残余应力及装夹应力容易使刚性差的薄壁件引起较大的加工变形，而传统工艺难以使其达到精度要求。
The earth stress is an essential force causing rock deformation and breakage.
地应力是引起围岩变形和破坏的根本作用力。
Soft rock wall of tunnels in deep mining will have large creep deformation when the stress in rock is near its ultimate strength.
在深井软岩条件下，巷道围岩应力状态处于岩石强度极限邻域内，围岩会产生较大的蠕变变形。
And reach a conclusion in the tunnel and stability of the surrounding rock, rock deformation, stress distribution, economic and technical aspects of security.
并且分别从隧道围岩稳定性方面、围岩变形方面、应力分布方面、经济和技术方面以及安全方面得出结论。
In the analysis of the stress and deformation under dynamic loading, the inertia force and damping moment should be considered in addition to the transverse shear effect.
在分析动载荷下的应力和变形时，除考虑横向剪切效应外，还须考虑微段的惯性力和阻尼力矩。
Do research on the stress and deformation state in the condition of bending, braking, turning and reversing, and then make a program that improves the structure of the frame.
分析在弯曲工况、制动工况、转弯工况和扭转工况下的应力与变形状态，对应力集中位置结构提出改进方案。
The deformation and stress condition of the micro-composite are studied according to the shear-lag theory and strain-hardening law.
按照剪切滞后理论和应变硬化规律，研究微复合材料的变形和应力状态。
Relative to the bungalow, villa and other buildings, multilayer, high-rise buildings because appearance in response to sunlight the area is large, so more stress, deformation and more big.
相对于平房、别墅等建筑，多层、高层建筑物由于外表受到阳光照射面积大，所以应力更大，变形也更大。
The stress characteristic of the interface, deformation rule under the action of load and the stress distribution rule were discussed by adopting the experimental research method.
采用实验研究的方法，探讨锚固体界面力学特征、在荷载作用下变形规律以及界面上的应力分布规律。
The paper has studied straightening stress and residual deformation of circular shaft by using elastic - plastic theory, deueloped calculation formula of straightening loud in given deflection error.
从弹塑性理论出发以圆截面轴为例对校正应力与残余变形进行了分析研究，提出了在给定弯曲误差下的校正载荷的计算公式。
In this paper, the stress and deformation of three different structuring forms of ship hull are analyzed under the conditions of the same external load and the equal mass structure.
本文在外载相同、艇体结构质量相等的条件下，对三种不同结构形式的艇体进行了应力与变形分析。
Plastic deformation concentrates at the ferrite area under the tensile stress es.
在拉应力作用下，塑性变形集中在铁素体区。
Stress, deformation and stability analysis of the same cemented-rockfill dam are compared before and after optimization.
比较了优化前后坝体的应力、变形与稳定分析结果。
If, when the stress is removed, the deformation remains, the material is said to exhibit plastic flow.
如果在撤去应力后变形仍保留，则称此材料呈现塑性流动。
The stress and deformation analysis for surrounding rock of tunnels is an important task in tunnels design.
隧道围岩应力和变形分析是隧道设计的重要内容。
The driving wheel's axle is a key parts of the billet transport vehicle, so the axle's stress and deformation were analysed by the structure finite element analysis software ANSYS.
主动车轮轴是钢坯运输车的关键零部件，采用结构有限元分析软件ANSYS分析了该轴的应力和变形。
Computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.
本文应用有限元法，对6125Q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。
Temperature affects structure in two aspects: deformation and stress.
温度对结构物的作用体现在变形和应力两个方面。
With the non-line finite element method, the numberical value calculation on the stress and deformation of surrounding rock of deep mine roadways has been presented.
采用非线性有限元法，对深井巷道围岩应力及变形状态进行了数值计算。
Due to high in situ stress in the powerhouse area, important deformation of local surrounding rock, rock burst, shotcrete spalling occur during excavation.
由于场区地应力比较高，在开挖期间出现了局部围岩的大变形及岩爆、喷混凝土层剥落等不良现象。
When the membrane stress is removed, circle elasticity deformation end radial shorten elasticity deformation make for resilience.
当膜力卸除后，周向弹性变形和径向缩短的弹性变形导致回弹。
The structure and load form of the absorbing tower is complex and regular design and calculation method cannot give its distribution condition of the stress and deformation.
脱硫吸收塔结构及荷载形式复杂，常规设计计算方法不能给出其应力和变形分布情况。
He describes features of tectonic regions, including crustal structure, crustal deformation, stress field and crustal activity.
并从重力场反映的地壳结构、地壳形变、地壳应力状态、地壳活动性诸方面，论述了各构造区的特征。
He describes features of tectonic regions, including crustal structure, crustal deformation, stress field and crustal activity.
并从重力场反映的地壳结构、地壳形变、地壳应力状态、地壳活动性诸方面，论述了各构造区的特征。
应用推荐