The limitation of the stress component method on solving such a problem is also discussed.
并讨论了应力分量法的局限性。
A mechanical model is built firstly for single microcrack under uniaxial compression loading, and the stress component of microcrack end is calculated.
首先建立单一微裂纹在单轴压缩荷载作用下的力学模型，求出裂纹端部的应力分量。
As the main stress component, box truck crane telescopic boom usually accounts for the weight machine for 13 ~ 20%, while the percentage of large cranes is greater.
箱形伸缩臂作为汽车起重机的主要受力构件，其重量一般占整机的13 ~ 20%，而大型起重机占的比例则更大。
The door is open run in peace folding doors around the hinge rotation, the maximum stress component is the hinge, bearing friction hinge is very small, the noise is small.
折叠门和平开门运行中门扇是绕铰链旋转的，受力最大的部件是铰链，铰链的轴承摩擦阻力很小，噪音也很小。
The problems of whether the peak stress is the stress component distributing along thickness in nonlinear and whether the peak stress is self-limiting were analyzed and discussed.
对峰值应力是否仅是沿壁厚非线性分布的分量，是否都具有自限性进行分析、讨论。
This indicates that normal stress component plays a dominant role in stress corrosion of this system, which is related to the anodic dissolution accelerated by normal stress component.
这表明，正应力在这种应力腐蚀体系中起主导作用，这和正应力能促进阳极溶解过程有关。
The selection of a suitable stress method to easily and quickly solve a plane problem in elasticity is expounded through comparing the stress function method with the stress component method.
通过对应力函数法与应力分量法的比较，论述了按应力求解弹性力学平面问题时，如何选择合适的解法，以取得难度小、求解快的效果； 并讨论了应力分量法的局限性。
The dysregulation of fear is an important component of many disorders, including generalized anxiety disorder, panic disorder, specific phobias and post-traumatic stress disorder.
恐惧失调是很多疾病的一个重要组成部分，包括广泛焦虑症，恐慌症，特定恐惧症和创伤后恐惧障碍。
An applied tensile or compressive stress resolved into a shear component along a specific plane and direction within that plane.
一个实际拉或压应力沿某一特定平面和在该平面特定方向上分解得到的切应力分量。
A torsional vibration balancer is used to reduce torsional vibrations on the crankshaft and to minimise component stress e. g. on the belt drive.
采用扭振平衡器来减少曲轴箱的扭转震动，并将部件压力(如皮带驱动上的压力)减至最小。
A torsional vibration damper is used to reduce torsional vibrations on the crankshaft and in turn minimise component stress.
扭振减震器用于降低曲轴上的扭振，进而最大程度上减小部件应力。
Qigong can help practitioners to learn diaphragmatic breathing, an important component of the relaxation response, which is important in combating stress.
气功可以帮助医生了解横膈呼吸，一个重要组成部分放松反应，这是很重要的，打击的压力。
The research shows that the stress concentration is large near the interface of each component in the area of node.
研究表明，节点区域内各构件的接触面附近，存在较大的应力集中现象。
This method can be applied to designing sample components for fatigue test as well as to forecasting various fatigue life of component from stress fatigue to strain fatigue.
该方法不仅可用于构件从应力疲劳到应变疲劳的各类疲劳寿命预测，还可用于构件的疲劳试验模拟件设计。
Tensile and fatigue tests showed that this detector can effectively detect Che stress concentration of ferromagnetic component.
拉伸和疲劳循环试验说明了所研制的仪器能有效地检测构件的应力集中。
The stresses component, principal stresses and effective stress on the surfaces of thin plate or shell structures.
薄壁板壳结构表面的应力分量、主应力和有效应力。
In the optimum design, effects of variety of structure type and structural components on stress are analysed, so that reasonable structure type and component dimensions may be obtained.
在优化设计中，用正交法分析了结构形式和构件变化对应力变化的影响，得出了合理的结构形式和构件尺寸。
Earthwork opening is an organic component in foundation pit construction and attention must be paid to the crustal stress release in treating the packed soil piles.
土方开挖是基坑工程的有机组成部分，对挤土桩，须重视地应力释放问题。
A host of focal mechanism solutions show that there is a locally small regional stress field characterized by horizontal compresion component is dominant in the north of the basin.
大量震源机制解结果表明，运城盆地存在以水平拉张为主要特点的局部小区域应力场，盆地北部水平挤压分量占优势。
Resolve the problem of stress focus don't adopt increasing component dimension, but structure measure by reducing stress focus or locally supplying strength.
解决应力集中问题不应通过加大构件断面尺寸，而应采用降低应力集中的结构措施或局部补强。
Resloving the problem of stress focus don't adopt increasing component dimension, but structure measure by reducing stress focus or locally supplying strength.
解决应力集中问题不应加大构件断面尺寸，而应采用降低应力集中的结构措施或局部补强。
The circuitry may be rearranged for the purpose of the test to reduce the likelihood of solid state component damage while retaining the representative dielectric stress on the circuit.
有获得的电介质应力集中在电路时，为了测试，可以将电路重新安排，以减少固态组件受损的可能性。
The device can guarantee the stress of anchor rope under designed stress all the time, and obtain the aim of protecting component in anchor-hold structure.
自保护装置能保证预应力锚拉构件上的应力始终不超过设计应力，达到保护锚拉构件不破坏的目的。
The measurement of working stress is to measure the actual stress in a working structure component.
工作应力测试就是检测结构构件在使用时的实际应力。
Observational objects include: cubic strain, component strain, component stress and differential strain of borehole stress strain.
观测对象包括：体应变，分量应变，分量应力和钻孔应力-应变差应变。
It is hard for CFRC to directly sense the load of vehicles, and the special component which can enhance the stress by changing the pressed area.
考虑到碳纤维水泥试件很难直接感应到车辆的荷载，提出了改变受力面积来增大碳纤维水泥试件所受压力的特殊构件。
During component design, eliminating or minimizing areas of stress concentrations is a key objective. Special attention is given to protective finish runouts adjacent to stress concentration details.
杜绝应力集中是部件设计的主要目标，应当特别注意过渡到应力集中的各个点附近的表面保护涂层。
The stress, strain, and displacement of component of the cutters have been simulated under different rotate speeds in ANSYS.
采用ANSYS进行了不同转速下高速面铣刀刀体、刀片、刀具附件等刀具构件、装配的应力、应变、位移有限元分析。
The stress, strain, and displacement of component of the cutters have been simulated under different rotate speeds in ANSYS.
采用ANSYS进行了不同转速下高速面铣刀刀体、刀片、刀具附件等刀具构件、装配的应力、应变、位移有限元分析。
应用推荐