After a cell is broken, the stress adjustments of the other cells in the system are obtained by finite element method using the broken cell as inner boundary.
当单元破裂后,将破裂单元作为内部边界,利用有限元方法计算由于这个单元破裂对系统其他单元造成的应力调整。
Solves the problem of boundary value on an annular crack by using the nonlocal stress solution of an axisymmetric crack problem and approximative method of series expansion.
利用已得到的三维轴对称问题的非局部弹性应力的解,采用级数近似展开的方法,求解环状裂纹的边值问题。
In this paper we use boundary element method to separating main stress. It can simplify the problem and provide a practical method for separating main stress.
本文将边界元法引入光弹性应力分析使主应力分离问题得到简化,从而使光弹性应力分析方法更简便可行。
The stress fields of such structure around the opening were predicted using a three-dimensional, higher-order fast multipole boundary element method.
为精确模拟该结构的应力状况,该文提出一种三维高阶快速多极边界元法。
The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions.
分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析;
In this paper the boundary element method based on stress for solving the elastic problems of the plane is proposed.
本文提出了求解平面弹性问题的应力边界元法。
In this paper, a boundary integral equation method is applied to compute the dynamic stress intensity factors of collinear periodic antiplane cracks.
本文采用一种边界积分方程法,计算了共线周期反平面裂纹的动应力强度因子。
The calculation of the initial stress (or initial strain) singular integrals in elastoplastic boundary element method is a difficult, but an important problem.
弹塑性边界元法中初应力(或初应变)奇异体积分的计算一直是一个较为困难、但又是非常重要的问题。
In this paper, boundary collocation method is used to calculate stress intensity factors of an eccentric crack in an elliptical disc subjected to a uniform tension stress.
本文用边界配置方法计算了不同情形下含偏心裂纹椭圆盘受均布载荷时的应力强度因子。
Studies of stress distribution during undercutting were carried out using Boundary Element Method for Tongkuangyu Copper Mine.
文章根据铜矿峪铜矿开采条件,运用边界元法进行了矿块崩落法拉底过程中应力分布规律的研究。
An inverse stochastic boundary element method for prediction of contact stress is presented by combining improved filter algorithm with stochastic boundary element method.
将改进的滤波算法和随机边界元法结合,提出了用于预测接触应力的逆随机边界元法。
In this paper a perturbation boundary element method is proposed to analyse stress and strain for the problems with nonlinear materials.
本文提出用摄动边界元法对材料非线性问题进行应力、应变分析。
The present paper discuses, with the method of matched asymptotic expansions, the stress boundary layer of the slender riser in a steady flow.
本文用匹配方法讨论定常流中细长立管所产生的应力边界层现象。
The tangential stress at the boundary can not be gained directly in the application of Boundary Element Method to analysing elastic stress.
在用边界元法作弹性应力分析中,不能直接计算出弹性体边界切向应力。
The stress concentration analysis was done by the finite element method and boundary element method. The fatigue strength and the strength under the static load were calculated.
对螺纹槽管进行了疲劳强度计算,并采用边界元和有限元法对螺纹槽管的应力集中进行了数值分析及静载强度计算。
A brief discussion is made in the paper on the effectiveness of the boundary element method to the stress analysis of the welded joints.
同时还简要讨论了用边界元法进行焊接接头应力分析的有效性。
High calculation accuracy can be obtained in calculating the concentration factor of the stress around infinite elastic medium cavities by using boundary element method.
使用边界单元法计算无限大弹性介质中孔洞周边应力集中系数,可获得较高的计算精度。
Our 3D BEM(Boundary Element Method) calculation shows that the larger the notch width is, the bigger the error makes for the dimensionless stress intensity factor.
通过三维边界元计算分析表明,切槽宽度越大,无量纲应力强度因子的标定值就越大;
The stress intensity factors of bimaterial interface crack are analyzed using the boundary element method with bimaterial fundamental solutions.
采用双材料基本解建立边界元法基本方程,计算双材料界面裂纹尖端附近的应力和位移场。
This paper deals with theoretical and numerical analyses of scattering of elastic wave and dynamic stress concentrations in an infinite thin plate with a circular hole using boundary element method.
本文采用边界元法对开孔无限大薄板弹性波的散射与动应力集中问题进行理论分析和数值计算。
Stress function method is a simple and straight approach for stress or mixed boundary value problems, such as solids under contact.
应力函数法是求解应力边值问题和混合边值问题,诸如弹性固体接触问题简单、直接的方法。
The convergence problem of boundary collocation method used to calculate the stress intensity factor is also investigated.
还探讨了边界配置法求应力强度因子时的收敛性问题。
The proposed method considering constitutive character of the rock mass can predict two-dimensional long-term deformation without stress and displacement boundary conditions.
无需复杂的应力边界和位移边界条件,能够考虑岩体介质的本构特征,实现长期的两维变形预报。
The stress intensity factors are solved by means of variational method to satisfy the other boundary conditions.
应用变分原理满足其余边界条件并求解应力强度因子。变分方程中只有线积分。
By using the method of small parameter expansions the present boundary-value problem is solved. Thus the formula in the second approximation for the stress field is obtained.
本文运用小参数展开法求解了这一大变形问题,获得应力场的二级近似公式。
A computation program has been developed, using a two dimension boundary element method, for calculation of stress strength factor at the welding crackle tip.
反映裂纹尖端附近区域应力场强度的物理量称为应力强度因子。它和裂纹大小、形状以及外应力有关。
A computation program has been developed, using a two dimension boundary element method, for calculation of stress strength factor at the welding crackle tip.
反映裂纹尖端附近区域应力场强度的物理量称为应力强度因子。它和裂纹大小、形状以及外应力有关。
应用推荐