Analyze - and then perhaps modify - your behavioral tendencies: Taking a careful look at your own behavior can the first step to reducing your overall stress levels.
分析——然后可以修正——自己的行为倾向：仔细观察自己的行为是全面降低压力水平的第一步。
Finally, we analyze the potential for additional enhancements to the bookstore site stress test environment.
最后，我们分析对书店站点压力测试环境的额外增强的潜力。
One of the techniques used for identifying potential performance opportunities in Domino 7 was to analyze the internal operations that occur during stress testing.
用来判断在Domino7中可以进行性能优化的一种技术是对压力测试过程中所发生的内部操作进行分析。
Using well log data to analyze earth stress is not only to quickly get the stress profile spreading along the depth, but also to save high cost for measurement.
测井分析地应力不仅可以方便、迅速得到沿深度连续分布的地应力剖面，而且节约了昂贵的地应力测试费用，具有明显的经济意义和实用价值。
The finite element method is used to analyze the relationship between strength and stress of the particle reinforced iron matrix composites and the shapes, sizes and fraction volume of the particles.
采用有限元方法分析了颗粒增强铁基复合材料强度和应力与颗粒形状、尺寸以及体积分数的关系。
Examples are presented at the end of this paper to analyze the influence of the partial sealing property of tunnel on stress, displacement and pore pressure.
文末给出了算例，分析了隧洞的半封闭特性对应力、位移和孔隙水压力的影响。
Lode parameters are used to analyze the stress and the strain of the flange in calendering.
应用罗代参数对压延工艺中的凸缘部分进行应力和应变分析。
Universal tensile testing machine can analyze the test results, such as elongation, average value, the stress, strain and damage, etc.
万能拉力试验机可剖析整个测验的成果，例如伸长量、应力、应变、损坏值、平均值等。
This finite element method is employed to analyze the behavior of eccentrically loaded CFST columns, taking initial stress degree, slenderness ratio, and eccentric ratio as the parameters.
应用该方法，以长细比、偏心率和初应力度为主要参数对有初应力的钢管混凝土偏压构件进行了受力性能分析。
In this paper, fractal geometry isu sed to quantitatively analyze the stress-strain curves of extruded rice.
该文利用分形几何的方法对挤压膨化大米的应力-应变曲线进行了定量分析。
A method of topology optimization of grillage structure with stress constraints is presented and applied to analyze the reinforced beam of raft foundation.
对筏型基础的加强梁分布进行拓扑优化分析，提出一种应力约束下的格栅结构的拓扑优化方法。
A three-dimensional numerical model with free water surface and wall shear stress was used to analyze the water flow affected by piers.
该文采用具有自由水面和河床切应力计算的三维数学模型分析了桥墩群对河道水流的影响。
To analyze the stress distribution in facet joint of lumbar spine on normal and degenerative models with biomechanical method during the manipulation.
采用生物力学的方法分析模拟推拿时正常和退变腰椎小关节的应力分布状况。
The regression statistical method has been used to analyze the law of stress and strain as The Times under the function of axial load increases.
研究了铺装层应力场分布，回归统计了随轴载作用次数增加，应力应变的变化规律。
An adaptive state of a usual truss is primarily analyzed. This method is valuable to analyze the adaptive stress of truss.
初步分析了一种常用桁架的自应力状况，这一分析方法对一般桁架的自应力分析有参考价值。
Shear theory was used to analyze stress distribution on double cutting of brown rice and cooked rice.
应用剪切理论分析了稻米及米饭的双面剪切的应力分布。
It proved that autofrettage technique is better than shrunk principle by analyze stress.
通过应力分析，论证了用自增强技术优于缩套原理的结论。
Characteristics of different material obtained from stress versus strain cure of cushion material are to analyze strain scopes at the respective stress ranges.
垫层材料应力应变试验可以了解不同材料的变化特征，分析在各自的应力区间中的应变范围。
Objective: The authors analyze the stress distribution of the modified and conventional bar - clip implant - borne overdeture in the edentulous mandible under static loads.
目的：分析全下颌改良杆卡式种植覆盖义齿受载的应力分布并与传统的杆卡式比较。
It is a very complicated problem to analyze the stress of combined matrix, and the key point related to die life is to do it's precise analysis.
组合凹模的应力分析是一个非常复杂的问题，对其进行精确分析是解决模具寿命的关键。
METHODS: Three-dimensional finite element method was used to analyze the initial stress around screw implant of different elastic modulus and different diameter.
方法：用三维有限元的方法对不同弹性模量和不同直径种植体植入后骨界面的初始应力进行分析。
AIM: To analyze the stress distribution of the condylar cartilage during mandibular distraction osteogenesis in goats.
目的：分析山羊下颌骨牵张成骨中下颌骨牵张延长后髁突软骨表面的应力分布规律。
The plane stress theory is applied to analyze the contact stress between cast track and roll wheel.
采用平面应力理论来分析滚轮与轨道的接触应力问题。
The three-dimensional photoelasticity method is used to analyze the stress distribution in the bevel gear under torsional moment and centrifugal load.
本文用三维光弹性法分析锥齿轮在扭矩和离心载荷下的应力分布。
Firstly, analyze the main girder stress in different stage in the paper.
首先，本文分析了桥梁成桥阶段应力。
The finite element method is used to calculate and analyze the stress and the displacement of host rock when the openings is under the jet grouting support.
采用有限单元法对巷道注浆支护时的围岩应力和位移进行了计算分析。
The paper testified rationality of the established model to analyze nowadays stress of Jiefang valley model and to study distributing character of the stress.
本文主要是对解放沟现今河谷地应力场进行分析，研究地应力场的分布特征。
ANSYS software will be applied to analyze the stress of connecting rod, and the maximum stress and displaced shape are showed.
主要利用ANSYS软件对连杆应力进行分析，计算出连杆的最大应力和应变。
In this research work, the thermal elastic-plastic method is used to analyze the dynamic thermal stress in the stress-frame specimen during its solidification and cooling process.
本研究用热弹塑性方法分析铸造应力框自凝固到冷却过程动态热应力。
Objective To analyze the pathogenesis of stress gastrointestinal bleeding after traumatic brain injury and the nursing management in the reduction of it.
目的分析颅脑损伤后应激性消化道出血的发病机理，探讨减少消化道出血的护理措施。
应用推荐