Various automation techniques were employed to enable stress/load testing, memory leak analysis, data integrity testing, and regression testing throughout the test effort.
在测试过程中，使用各种自动化的技术来启用压力/负载测试、内存泄漏分析、数据完整性测试，和回归测试。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
The data from a large - scale consolidation test are important for the stress and strain analysis of a dam foundation.
大型固结试验所获得的参数，是坝基应力应变分析的重要数据，而此项试验研究工作，在东北地区尚未广泛开展。
Basic equation of photoelastic stress analysis by Chen (1962) is adopted; and a cubic spline function suitable for processing of photoelastic data is derived.
文中采用陈至达(1962年)的光测应力分析基本方程，并导出适合于光弹性数据处理的三次样条函数。
The relationships from vertical soil pressure, axial stress of anchor, lateral displacement of foundation to construction process are got by test data analysis.
通过对试验数据的分析得出了土中竖向应力、锚杆轴向应力、基坑侧向位移与施工过程间的变化关系。
Based on qualitative analysis, the observational data of compression stress metre in a concrete dam have been analyzed quantitatively in this paper by mathematical mode.
在定性分析的基础上，通过建立数学模型，对某混凝土坝压应力计观测资料进行了定量分析。
Through bidirectional data interchange between ADAMS and ANSYS, dynamic stress analysis of this elastic mechanism is conducted.
通过进行ADAMS与ANSYS之间的双向数据交换，对该喷管弹性机构构件进行了动态应力分析。
Introducing magnetic memory effect and detection theory summarily, using the data measured by TSC-1M-4 to analysis the basic feature of the area of stress concentration.
简要介绍了磁记忆效应和检测原理，并用TSC - 1 M- 4测得的数据分析了应力集中区的基本特征。
Based on the analysis of the experimental data and the research results reported in references, the practical calculating equation of the ultimate stress in unbonded post tensioning is proposed.
在分析国内外大量试验数据和文献研究的基础上，建立了无粘结预应力筋极限应力实用计算方法。
Results: Occupational stress survey data were utilized to exemplify the latent variable scores estimated method and the analysis results OSI-R coincided with professional interpretation.
结果：利用一组职业紧张调查数据例证了潜变量得分的估计方法，通过对职业紧张量表(OSI - R)测量结果分析，结果符合专业解释。
The test analysis shows that the fitted slope of test data to nominal stress and hot spot stress S-N curves for aluminum 5083 welded joint with longitudinal fillet welded gusset is 5.
试验分析说明铝合金5083纵向角接板焊接接头名义应力和热点应力疲劳s - N曲线试验数据拟合斜率为5。
This paper presents the analysis of stress, characteristic of skew arch bridges by comparing with the data derived from theory computation, model test and practical bridge test.
本文通过理论计算、模型试验和实桥试验数据的对比，对圆弧形斜拱桥受力特性进行了分析研究。
The stress analysis at single support phase was the same as the results of previous experimental data.
单腿站立位的应力分析显示与以往实验结果基本相符。
Residual - stress in welded square tube is measured by the sectioning method. And the statistical analysis of its data is made.
本文用切条法测定焊接方管截面的残余应力，并对其数据进行了统计分析。
Thls paper introduces data and result about structure design of the lifting beam, its strength check, nondestructive test, strain measuring and stress analysis.
本文介绍吊梁的结构设计与强度校核、无损检验、吊装过程应变测试及应力分析等方面的数据和结果。
This paper describes the application of holographic photoelasticity to the analysis of the contact stress of a 50-ton automatic disengaging hook, and gives all the data needed.
本文用全息光弹法对50吨自动脱钩钩体进行了实验应力分析。给出全部所需数据。
Based on the data analysis results, the laws of the stress change, distribution and transfer are primarily revealed, which can provide a scientific fundament for tank lifting in scenario and safety.
经过数据分析，揭示了罐壁应力变化、分布与传递的内在规律，为确保今后油罐举升方案的制定和安全实施提供了科学依据。
Through analysis and comparison of testing data, the one high driving and different diameter rolling have reduced 21-40 percent rolling force and assured the safety of the parts under stress.
通过实验数据分析和比较，单辊传动异径轧制可降低轧制力21—40％，保证了轧机受力零件的安全。
Specific as follows: The theoretical analysis model of building a pipeline network, to get accurate data of the free stress;
将历史数据与自由压力进行比较、分析并进一步构建出城市管道爆管预警的初步模型；
The comparative analysis of stress nephogram and data of leg well area is of guiding significance to the research on how to avoid boundary effect during the calculation of jack-up's leg well area.
围井区应力图像和数据的分析，对自升式平台围井区计算中如何避免边界效应的影响具有一定的指导意义。
The stress distribution of the, gearbox was obtained through finite element analysis and was compared with the experimental data.
通过有限元分析得到了该机匣的应力分布，并与试验值进行了对比。
Based on the feature of subgrade construction and with the analysis of the observed settlement data, a series of stress-strain isochrones are arranged in this paper.
本文基于高速公路路基填筑的特点，通过实测沉降资料的分析，整理出一系列应力应变等时曲线。
Meanwhile, through the grey forecasting of equidistant data sequent, GM(1,1) modeling is established, while the data analysis about the relationship between additive stress and time is made.
同时，运用灰色理论中的等间距数列预测建立了GM（1，1）模型，对膜致应力-时间的关系进行了数据分析。
Based on experimental data and finite element analysis results, a low-cycle fatigue life model is proposed for the powder metallurgy superalloys under multiaxial stress states.
在详细分析试验和有限元计算结果的基础上，提出了复杂应力状态下的低周疲劳寿命模型。
Results:Occupational stress survey data were utilized to exemplify the latent variable scores estimated method and the analysis results OSI-R coincided with professional interpretation. Con…
结果：利用一组职业紧张调查数据例证了潜变量得分的估计方法，通过对职业紧张量表（OSI -R） 测量结果分析，结果符合专业解释。
Conclusion This FE models were feasible and effective, the data could be applied in the stress analysis of the lower teeth…
结论该模型有较好的力学和几何学相似性，所包含数据可以进行摇椅弓作用下牙齿的受力状况和牙周组织应力分布分析。
Based on the field analysis of deformation and stress field inversion from fault slip data, the formation and tectonic evolution history of the Liupanshan basin has been preliminarily established.
基于野外变形分析与断层滑动矢量构造应力场反演，初步确定了六盘山盆地形成与构造演化历史。
Through the analysis of support axial stress actual measurement data compared with design numeric, adjust the design scheme of the support and yield good economic returns.
通过对支撑轴力实测数据与设计值对比分析，调整了支撑设计方案，取得了一定经济效益。
Through measurement and data regression analysis at Shuibuya Hydraulic Project, the characteristics of stress field in complex rock mass are also revealed.
通过对水布垭枢纽工程的地应力测试成果和地应力场反分析成果的综合研究，展示了复杂岩体中的应力分布特征。
So carrying on in-situ measurements of anchor's stress, the value and distribution of earth pressure will be investigated by analysis on actual data.
对锚杆受力进行原位监测，通过对数据进行研究、分析，可以了解土压力的大小和分布规律，这对于优化深基坑支护结构设计具有重要的实际意义。
应用推荐