The morphology of joint surface is one of the key factors affecting shear strength of joint.
节理表面形貌是影响节理抗剪强度的重要因素之一。
The bonding strength of joint zone made by direct and indirect bonding was evaluated and their fracture characteristics were analysed.
对直接连接和间接连接接头的接合强度进行了评估，并对接头断裂特性进行了分析。
Results show that high strength of joint and its good hermetization can be arrived by using proper structure and reasonable technology.
研究表明，只要采取适当的结构和合理的工艺，即可获得高强度的接合和良好的气密性。
It is shown that the shear strength of joint is concerned with normal stress and weighted average of mean profile angles of joint surface.
说明节理的抗剪强度与法向应力和节理表面形貌特征参数有关。
Expansive cement paste and joint concrete are next. And the bond splitting tensile strength of joint surface without bond material is least.
其次是水泥膨浆和接缝混凝土，接缝面不铺筑任何接缝面材料的试块，劈裂抗拉强度最小。
Tensile and microhardness tests show that the quality of joint is better and tensile strength of joint does not decrease greatly compared with that of parent material;
拉伸实验和显微硬度测试表明，接头质量良好，与母材强度相比，接头的抗拉强度未见有大幅度下降；
The results show that proper pressure and interlayer thickness can evidently improve the microstructure and mechanical properties, and the shear strength of joint is increased with the holding time.
结果表明：合适的压力和中间层厚度能有效改善接头的组织和力学性能，接头剪切强度随保温时间延长而提高。
Joint tensile strength was high, generally 95% of base metal.
接头拉伸强度较高，一般为母材95%左右。
Moreover, the test data were statistical treated with the method recommended by IIW and compared with fatigue strength of structural steel with identical joint type.
用国际焊接学会推荐的方法进行统计处理，并和相同接头形式结构钢的疲劳强度进行了比较。
Background: The effects of treatment of children with longitudinal radial deficiency are generally evaluated by measuring grip and pinch strength and joint mobility.
背景：对桡骨长度短缩患儿的疗效一般为通过测量握持与拿捏的力量以及关节活动度来评估。
In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.
钢结构节点设计中，梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接，螺栓群所承受的荷载有竖向力和偏心力矩。
For moderate JI, lower strength and the behavior of jointed rock specimen are mainly governed by joint.
当节理倾角适中时，节理岩样的峰值强度较低，岩样的行为受控于节理。
This approach is suitable for prediction of yielding strength in HAZ-softened welded joint as well as for strength design of well-matched welded joint.
这种方法可用于热影响区软化焊接接头屈服强度的预测和高匹配接头的强度设计。
By analyzing the factors affecting the joint strength of transportation belt, and taking into account production requirements, methods of enhancing the joint strength of the belt are suggested.
通过分析影响运输胶带接头强度的因素，结合生产实践，提出提高运输胶带接头强度的方法。
The shearing strength of the brazed joint can be also greatly strengthened.
同时还可以显著提高钎焊接头的抗剪切强度。
Strong adhesion, high strength paper based tape. It's used for joint of heavy electric component.
高粘接力，高强度纸基胶带，用于重型电子元件粘接。
And it is observed that laser power is the ultimate affection of joint strength, the defocusing amount is the weak influence, and the welding speed between the former affection factor.
进一步分析发现激光功率对接头强度的影响最大，焊接速度的影响仅次于激光功率，离焦量的影响最小。
The new spot welding technics of arbitrary waveform control is an effective approach to solve the contradiction of gain high strength joint but without splash.
阐明了任意波形控制法和任意波形控制法点焊新工艺是解决焊点强度高又无飞溅这一对矛盾的有效途径。
In this paper, some factors affecting the strength of corner joint structure in particleboard furniture have been investigated.
本文针对影响刨花板家具角结构强度的几个因素进行了探讨。
Furthermore, the formation of cracks results in the degradation of solder joint strength, but affects mildly to the electrical properties.
裂纹的产生导致了两种焊点强度的降低，对其电性能的影响却甚微。
By the statics analysis of knee joint, the article has a further research on the mechanics characteristic of knee joint in the barbell strength training.
通过膝关节载荷静力学分析，进一步认识了杠铃力量训练过程中膝关节的力学特点和变化规律。
For a given layered planar structure, we use the solidifying process of the adhesive layer to simulate the change process of interface strength of the adhesive joint.
对于给定的层状平面结构，将粘接层的固化过程用于模拟粘接层界面强度的变化过程。
Shear results of joints show that joint strength can be increased obviously in a certain range with composite soldering materials.
接头抗剪强度表明，在一定范围内，采用复合钎料可以明显提高接头强度。
The effect of welding process on the microstructure and the strength of welded joint is discussed in the present paper.
探讨了焊接工艺过程对气压焊焊接接头显微组织及强度的影响。
On the other hand, the recessing in the joint with low elastic modulus adhesive caus es the peak stresses increase evidently that may decrease the nominal and actual strength of the joint markedly.
而对于低弹性模量胶粘剂接头，间隙使得接头上的应力峰值明显上升，可能导致接头的名义强度和实际强度显著降低。
The effect of electromagnetic force on the splash, joint strength and welding process of capacitor discharge projection welding is studied.
研究了焊接过程中焊接电流产生的电磁力对电容储能凸焊喷溅、接头强度及焊接工艺的影响。
The result shows that the strength feature of knee joint, back and waist muscle can be evaluated based on the parameters of relative moment of various joints, acceleration time and angle of moment.
结果表明，古典式摔跤运动员膝关节、腰背和肘关节力量特征，可用各关节作功时的相对峰力矩、加速时间和峰力矩角度的参数大小评价；
The strength of the joint affects the ultimate bearing capacity of jointed rock foundations greatly unless the obliquity is too small or too large.
节理强度对岩石地基的极限承载力影响很大，但当节理倾角比较小或比较大时，节理的强度对计算结果的影响并不显著。
The strength of the joint affects the ultimate bearing capacity of jointed rock foundations greatly unless the obliquity is too small or too large.
节理强度对岩石地基的极限承载力影响很大，但当节理倾角比较小或比较大时，节理的强度对计算结果的影响并不显著。
应用推荐